No go for me
Printable View
No go for me
Works for me fine, Z10 STL 3 on Rogers
JR
More or less my experience with 1047 on STL100-3. Hotspot settings are not saved and attempting to turn it on shuts down WiFi. I smell a bug waiting to be squashed.
No go for me either. STL100-3 with Bell.
Hotspot will and always did shut down wifi. If you had wifi availability you wouldn't need hotspot :)
Posted via CB10
Try switching to airplane mode, turn airplane mode off, then try hotspot again. Try deleting and re-entering your apn (the same one). Hotspot did not work for me until I did one or both...
Well, I flashed the 811 radio and hotspot seems to be working fine now. I'm attaching the radio autoloader for the STL-2-3-4 for whoever wants to try it out.
This autoloader is non-destructive as well, meaning I didn't have to restore any of my data. But you should just in case anything goes wrong.
Enjoy! Cheers :D
https://mega.co.nz/#!ghASCLSa!NvXOYG...z6C6sarhlATars
Strange, I am using the 811 radio with the 1047 OS and I'm still getting that error message regarding Hotspot not available in region. Any other components you used from 810?
Hmmmm... Ok. I turned off the hotspot and tried to turn it back on and got that message back. But I rebooted my phone and was able to access hotspot again. Weird. I guess it's a one time deal type of thing per boot.
I wonder if this is by design, seems like the ability to tether or not tether is by carrier
I could pretty much use hotspot on the 810 so it's pretty much a bug on this build.
Posted via CB10
Not working, STL100-2 carrier 3 ITA
Not working on my Z10 STL100-1 10.2.0.1047. Keep on loading. Did anyone find the solution ?
Posted via CB10
Mine works, gets to a certain point and times out regarding no data (inactivity timeout) even though it was in the middle of a download. Quite interesting.
Hotspot doesn't work at all here, but bluetooth tethering works fine. Bridge to my PlayBook works fine as well. Z10 on AT&T.
Posted via CB10
Works for me STL 3 on Telus, i got the "not avaliabe in your region" notifcation the first time i set it up but i hit "okay" and its been working fine ever since.
Dudde!! I think I can add some steps on this one.
0. Install the full .810 OS ( .810 OS / .811 radio)
1. Configure your mobile hotspot; you can also configure whatever settings you want
2. Backup Settings either using Link or Sachesi
3. Installing 1047 with 811 radio, you can use WuWei's (B@stard builds) recent build
4. Do a Security Wipe
5. Restore Settings via Sachesi
6. Reboot
7. Profit
I have the same problem, using Telkomsel STL100-1. Before I use this leak mobile hotspot works, I do clean install, wipe and doesn't restore my backup... :(
Posted via CB10
i tried using the hybrid with the 810 radio and the results were the same. still a no go on STL 100-2. the bug is with OS in that case. now loading the original 1047 back. eagerly waiting for the next leak now.
Hi Everyone, I think I have a partial fix in this issue. But I dunno if it's going to work on you guys.
It seems that BBRY did a bad coding regarding the contract / prepaid APN selection. I think some of you have noticed this
Attachment 190068
It seems that if I select the last "instance" of "Contract" and opened Hotspot, it runs. However this can only be opened once a reboot so you need to so so If you wish to open it again.
I think that only the last entry actually "references" to the correct APN and the others might be to "wrong" APN's. This bug MUST be eliminated
So :
1.Reboot phone
2. Wait until everything initializes
3. Go to Mobile Networks and APN
4. Choose the last occurrence of Contact/ Prepaid and Save
5. Open Hotspot
6. Repeat Step 1 if you want to open another session.
Posted via CB10
My APN settings are greyed out.
Posted via CB10
I am using Z10 on Rogers LTE.
I used to have only a 512MB plan, APN is greyed out and mobile hotspot is NOT working even with the escreen workaround here.
Called Rogers, their policy is mobile hotspot requires at least a 1GB data plan.
I changed to a 2GB LTE data plan. Then I re-installed 10.2, and APN is now NOT greyed out, and mobile hotspot is working, without any escreen changes.
Also on the APN settings screen, I only have APN (not greyed out, can change), Username (blank), Password (blank). I don't see the information on mobile plan/contract/prepaid, etc, on previous post.
Just to share my experience on Rogers.
Blah so far nothing has worked for me. Do we have a apk to bar app that might work?
Same here with STL-3 on TMO US. Said it wouldn't but it did (like some first dates?) Wifi calling working, too. 1047 with 811 radio.
Problem I noticed after some tests is that the inactivity timer does not seem to work. It will disconnect at whatever timeout I set, like 15 mins or 60 mins, regardless of quite heavy upload/download activity.
Not sure if others observe the same behavior on other networks? Or it is just me? Or it is just me on Rogers?
Edit: I already tried restarting the phone