[jzajac]

Attachment 329948

When exactly?

Posted via CB10

For STL 100-4 Verizon users that means July 2015 if we're lucky. Thank goodness for leaks.

Posted via CB10

[moyah8]

OK, I've taken the plunge and installed this on my Classic, following a few bugs that I was not happy with.

My experience of installing this leak highlighted the importance of reading before asking a question or opening a new thread.

Having coming from a Q10 (which had almost all the different leaks) I quickly misread and came to the assumption that the Classic uses the same auto loader has the Q10! I found out the hard way when after loading the autoloader my device refused to boot and gave me some 1004 (or something, can't remember fully) error message. Clearly I had done something wrong.. instead of asking the question for help or posting a new thread I decided to read through every page of the thread which contained the autoloader, and sure enough on page 4 it was mentioned that the correct autoloader to use was the one for the Z30. Applied that autoloader and all is well now. :-)

All in all, thanks guys and girls for your continued wealth of information and advice... and to all the new peeps out there or the confused, please do a search or a thorough read before asking a question as more than likely you are not the only one faced with the problem, and chances are its already been asked and answered.... somewhere.

Posted via CB10 (Z10STL100-2/10.3.1.2072)

[944S]

Hey guys! So if I download for the Q10, I do not need to install the separate radios that were included as separate files? Just want to make sure. If not, then which radios are included with the whole package that I am currently downloading for the Q10?


Thanks in advance.

[wing2299]

I don't see this on my z30.

Posted via CB 10 on my Z30 (STA100-5) w 10.3.1.2072

I used Sachesi to download from Country "302" carrier "720" and search for Device Z30, after download all 205 files install using Sachesi. After installation there are 2 apps specific for Rogers. Other than that, android runtime seem to be much faster. Waze loads in 2 seconds.

[Fvioleiro]

Hey Guys, is any one who installed Leaked OS 10.3.1.2072 on BB Z10 have No Information about LTE Bands??? After I upgraded from 1154 to 2072 I can not see any more any information about LTE Bands under: Settings / About >>> Category / General: at the end of the page is where information about UMTS (all OK) and next one is LTE - no information, but was in 1154. Any idea ???

From Portugal One more

STL100-2 / 10.3.1.2072 via CB

[Kishan J-Z10]

For which Device ?

Z 10 STL 100-1

Can I get the autoloader download link?

Posted via CB10

[smart548]

Z 10 STL 100-1

Can I get the autoloader download link?

Posted via CB10

https://mega.co.nz/#!i4wwUQKT!i9tIxf...72H_XTUAH6MAtE

Posted via CB10

[Bravurag]

https://drive.bitcasa.com/send/atA0o...O51becvRE4GmBg
Autoloaders for OS 10.3.1.2072 no radio

Whats your pin?

A Happy Passport User....

[gabby_ss]

hello all!!

Just installed this leak on q10, and the blend is working! Hooray!!

[thurask]

https://drive.bitcasa.com/send/atA0o...O51becvRE4GmBg
Autoloaders for OS 10.3.1.2072 no radio

I have a feeling those have radios, but I wonder why...

[Pdinos3]

Whats your pin?

A Happy Passport User....

I wouldn't bother with him since he has no idea what he's talking about. Those autoloaders are courtesy of Thurask and they have radios.

Via CB10 and typed on PassportSQW100-1/10.3.1.2072

[Asongfor]

Hi All! I'be been trying to use the OS version of this autoloader for my Q10, but it keeps soft bricking my phone...gets half way through updatin gand then just gives a blinking red light. Anyone have any insight they could offer? Thanks in advance!

[Asongfor]

Hi All! I have been trying to load the full OS version for my Q10 but it keeps soft bricking my phone (gets halfway done loading and I get the blinking red light)...any thoughts on what I might be doing wrong? Thanks in advance!

[gabby_ss]

so the blend is really working on this leaked OS.. is it working for everybody??

[Lucas D]

Guys I'm not really new to leaks I know how to install them ext but I'm uncertain as to which version I get for ClassicSQC100-1/10.3.1.1154

Posted via CB10

[conite]

Guys I'm not really new to leaks I know how to install them ext but I'm uncertain as to which version I get for ClassicSQC100-1/10.3.1.1154

Posted via CB10

Look for the blitz 2072 thread. This will allow you to do a non-destructive update. Only one file for all devices is required.

Z30STA100-5/10.3.1.2072

[Pdinos3]

Look for the blitz 2072 thread. This will allow you to do a non-destructive update. Only one file for all devices is required.

Z30STA100-5/10.3.1.2072

Or use the z30/classic autoloader. Z30 and classic OSes are the same

Via CB10 and typed on PassportSQW100-1/10.3.1.2072

[gabby_ss]

Installed the auto-loader for Q10 from the first post, but i got 10.3.1.1450 instead of 10.3.1.2072..

Anyway, it is working very good, the Blend is working etc... the battery life time is good...

[conite]

Installed the auto-loader for Q10 from the first post, but i got 10.3.1.1450 instead of 10.3.1.2072..

Anyway, it is working very good, the Blend is working etc... the battery life time is good...

OS 10.3.1.2072 corresponds to software release version 10.3.1.1450.

Z30STA100-5/10.3.1.2072

[gabby_ss]

I did not understand what that means... is it is OS 10.3.1.2072, shouldn't be 10.3.1.2072 at about?

[Pdinos3]

I did not understand what that means... is it is OS 10.3.1.2072, shouldn't be 10.3.1.2072 at about?

In about. Click on the drop down to OS. Please

Via CB10 and typed on PassportSQW100-1/10.3.1.2072

[gabby_ss]

right! found it! Sorry guys, I have this Q10 only 4 months now.. I was on apple before so I am not that familiar with the system, but I like it.

Does blend is working for you? Mine is working fine...As I knew, the blend would not work until official SO releases on older devices...

[powereds]

What about the proximity sensor when making calls? Does anyone have the problem I have?

Posted via CB10

Mine is ok.

It's More Fun Using Q10.3.1.2072

[RubenDM]

This os is the best i had from 10.3.1 branch.
Smooth, no problems, happy camper here!

Posted via CB10

[jerryeight]

10.3.1.1450 = Software Release
10.3.1.2072 = OS Version
10.3.1.2073 = Radio Version

The Software Release is simply how it identifies the bundle of the OS and Radio versions. In the Settings > About screen, change to the "OS" view to see the other two items.

imho having this in the first post could possibly minimize confusions for people just getting into flashing and BB10

*just my two cents*