10-13-14 06:44 PM
441 ... 89101112 ...
tools
  1. Daniel Adkins's Avatar
    I tried downloading and opening Sachesi on my Macbook and it wont open once downloaded..
    10-25-13 10:38 AM
  2. 1in8twst's Avatar
    Many thanks for the info.
    10-25-13 11:04 AM
  3. nevertoofar's Avatar
    My carrier is Orange Spain and the 10.2 is not still available so I downloaded the update from Vodafone Spain and my device is running it amazingly!

    Posted via CB10
    10-25-13 11:42 AM
  4. tonyron227's Avatar
    Step 4 says to go to the folder where the files from Sachesi were downloaded to. However, when I downloaded the files, Sachesi downloaded them automatically without asking where to download them. Now I don't know where those files are.
    I found mine in a folder called Sachesi 1.1
    10-25-13 11:46 AM
  5. tonyron227's Avatar
    Cannot use this application Nortons keeps labeling it as a security risk and deletes it without allowing it to run.
    Temporarily disable Norton
    10-25-13 11:48 AM
  6. mfmaniaci's Avatar
    google search for Sachesi and click the first link. youll see next to the download link it says "requires QT". I had to downloaded QT first then Sachesi. Problem solved
    10-25-13 11:51 AM
  7. RazrRob's Avatar
    LopeZ10-

    Thanks for all your efforts!
    I really tried to make this work but had no luck (Z10 on TMO, STL100-3). Downloaded Sachesi, pulled SIM followed instructions but phone would never restart - just hung up on BB logo....
    Even though it didn't work for me others have had success because of your contribution to this community- thanks again
    10-25-13 01:08 PM
  8. LopeZ10's Avatar
    LopeZ10-

    Thanks for all your efforts!
    I really tried to make this work but had no luck (Z10 on TMO, STL100-3). Downloaded Sachesi, pulled SIM followed instructions but phone would never restart - just hung up on BB logo....
    Even though it didn't work for me others have had success because of your contribution to this community- thanks again
    I have a T-Mobile Z10STL100-3 too. It does get stuck in the logo and then when is 100% pull the battery or leave the volume keys + and - until the phone turns off then turn it on

    Posted via CB10
    RazrRob likes this.
    10-25-13 01:24 PM
  9. schiri's Avatar
    I found mine in a folder called Sachesi 1.1
    I give up.
    Can't find the files anywhere.
    10-25-13 01:52 PM
  10. Parikh1234's Avatar
    I think I have to decrypt my device. It keeps asking for a password when I try and install. Anyone else having this issue?

    Also I am on ATT / Q10 / STL100-1. I had to use the rogers update because at&t wouldnt recognize when downloading.
    10-25-13 02:01 PM
  11. cletis's Avatar
    OS10.2 is rolling all over the world now. No need to download the leaks. Wait for the official released coming to you now or within a couple of days. Be patient

    Posted via CB10
    Sure -- if your carrier will have it available before Q1 2014, which is an optimistic guess as to when Verizon US will make it available. The whole point of this post is that much of the world will NOT have it available through carriers any time within the next month or several.
    10-25-13 02:10 PM
  12. Parikh1234's Avatar
    Sure -- if your carrier will have it available before Q1 2014, which is an optimistic guess as to when Verizon US will make it available. The whole point of this post is that much of the world will NOT have it available through carriers any time within the next month or several.
    I agree, AT&T will have it next year. No need to wait that long.
    10-25-13 02:14 PM
  13. cletis's Avatar
    What would be helpful is a list of codes for those on ATT, TMO and VZW to use for their respected devices........
    What would be helpful is a list of carriers who have 10.2 available, sorted by phone version (and language, if that is relevant, although I don't think it is).

    EDIT:
    After doing some research, I see that those who have suggested that we Verizon users resign ourselves to the latest 10.2 leak instead of using Sachesi to install an official release are correct: It looks like there is no other carrier on the planet besides Verizon who has deployed the STL-100-4, and certainly no international carrier selling that model which has released 10.2.

    Drat.
    Last edited by cletis; 10-25-13 at 02:27 PM.
    10-25-13 02:16 PM
  14. fcaputo4's Avatar
    What would be helpful is a list of carriers who have 10.2 available, sorted by phone version (and language, if that is relevant, although I don't think it is).

    EDIT:
    After doing some research, I see that those who have suggested that we Verizon users resign ourselves to the latest 10.2 leak instead of using Sachesi to install an official release are correct: It looks like there is no other carrier on the planet besides Verizon who has deployed the STL-100-4, and certainly no international carrier selling that model which has released 10.2.

    Drat.
    Like I have mentioned a couple times before, you are able to use the SQN 100-5 variant with the Rodgers update and install that to your Verizon Q10. If you notice both the 5 and 2 (Verizon model) variants both have the same frequencies listed. 5 obviosuly has more than 2 but it will work, I have it running on mine right now

    Posted via CB10
    mgm1979 likes this.
    10-25-13 02:41 PM
  15. Parikh1234's Avatar
    just finished the update on my q10, finished with no issues but I still see the software version as 10.1.0.230. The OS, Radio, Webkit, etc are all 10.2. Any ideas?
    10-25-13 02:50 PM
  16. RazrRob's Avatar
    I have a T-Mobile Z10STL100-3 too. It does get stuck in the logo and then when is 100% pull the battery or leave the volume keys + and - until the phone turns off then turn it on

    Posted via CB10
    Thanks so much for the tip LopeZ10 but I tried both the battery pull and the volume up/down reset - unfortunately neither worked. Currently running 10.2.1.641 and the pin watermark and lack of wi-fi calling don't bother me (tho a resurrection of the Squircle wold be nice), i'm ok waiting until the next leak...
    10-25-13 03:49 PM
  17. fejorca's Avatar
    Hello, I have a STL100-2 in Colombia but can't find the correct update version for my z10, wich codes should I use? thank you.
    10-25-13 03:56 PM
  18. LopeZ10's Avatar
    Thanks so much for the tip LopeZ10 but I tried both the battery pull and the volume up/down reset - unfortunately neither worked. Currently running 10.2.1.641 and the pin watermark and lack of wi-fi calling don't bother me (tho a resurrection of the Squircle wold be nice), i'm ok waiting until the next leak...
    oh you should have told me you were running 10.2.1 it does not work downgrading just updating
    RazrRob likes this.
    10-25-13 04:01 PM
  19. mgm1979's Avatar
    Like I have mentioned a couple times before, you are able to use the SQN 100-5 variant with the Rodgers update and install that to your Verizon Q10. If you notice both the 5 and 2 (Verizon model) variants both have the same frequencies listed. 5 obviosuly has more than 2 but it will work, I have it running on mine right now

    Posted via CB10
    Agree - again...I think we're getting into a little reading comprehension fail here in this thread, as it swells.

    Perhaps updating the first post with a 'confirmed' settings/configuration table, or chart, would help clear the air, and not require 'new' folks to the party to read through 10+ pages of posts on this, that, and the other thing.

    I CAN CONFIRM: (from Denver, CO)
    Verizon Z10 (STL100-4) running Rogers Z10 (STL100-3) with no issues
    Verizon Q10 (SQN100-2) running Rogers Q10 (SQN100-5) with no issues.
    (Set country to 302, and carrier to 720 to search/download the correct files)
    10-25-13 04:04 PM
  20. Meok's Avatar
    What would happen if the phone rings during the update? I tried it before with the card out and it didn't recognize the phone. I finally got it to recognize the phone but it started the update with the sim in.
    10-25-13 04:55 PM
  21. TioPepe78's Avatar
    Does someone has done it on an STL100-1 using the vodafone UK? How did it went?
    10-25-13 04:57 PM
  22. mattuntalented's Avatar
    how long after the restart does it take to load? it completed, restarted the phone, and has now been stuck on the blackberry screen for a few minutes now.
    10-25-13 05:42 PM
  23. Ben Sun's Avatar
    I was always alerted that "error - authorization". How can I do?
    10-25-13 05:48 PM
  24. mattuntalented's Avatar
    took like 5min, waiting for the hub to load up and then its time to play around. so excited!
    10-25-13 05:48 PM
  25. LopeZ10's Avatar
    What would happen if the phone rings during the update? I tried it before with the card out and it didn't recognize the phone. I finally got it to recognize the phone but it started the update with the sim in.
    Don't answer the call. It could cancel the update and ending up messing your files

    Posted via CB10
    10-25-13 05:57 PM
441 ... 89101112 ...

Similar Threads

  1. Beautify effect gone in 10.2
    By diruocco in forum BlackBerry 10 OS
    Replies: 13
    Last Post: 10-29-13, 09:15 PM
  2. Difference between 10.2 official or leak?
    By Jeandry Brito in forum BB10 Leaked/Beta OS
    Replies: 8
    Last Post: 10-24-13, 10:52 AM
  3. 10.2 missing better swipe down settings menu
    By PrimalYeti in forum BlackBerry 10 OS
    Replies: 6
    Last Post: 10-23-13, 07:54 PM
  4. Search, phone and camera bar missing after 10.2 update
    By donaldblair in forum BlackBerry 10 OS
    Replies: 1
    Last Post: 10-23-13, 07:31 PM
  5. How much memory used
    By Playbookjoe in forum General BlackBerry Discussion
    Replies: 2
    Last Post: 10-23-13, 07:21 PM
LINK TO POST COPIED TO CLIPBOARD