08-26-14 04:21 PM
tools
  1. 1magine's Avatar
    1magine
    Has anyone been able to successfully load an e-screen on any 10.3 OS? If so, which e-screen, which OS?
    05-13-14 06:19 AM
  2. 1magine's Avatar
    1magine
    I wonder if I should take the silence as a "no" or as a we don't know what the escreen:// is?
    05-13-14 09:39 AM
  3. wolfee48's Avatar
    wolfee48
    I successfully loaded an e-screen. Did not check. 296 before sideloading.

    Posted via CB10 Z10STL100-4/10.3.0.296
    05-13-14 09:49 AM
  4. Dodger52's Avatar
    Dodger52
    I'll give it a try, report back later.

    Patience please

    Posted via CB10
    05-13-14 09:50 AM
  5. 1magine's Avatar
    1magine
    Originally Posted by dustanh
    I successfully loaded an e-screen. Did not check. 296 before sideloading.

    Posted via CB10 Z10STL100-4/10.3.0.296
    What are you running? .296 with the SDK radio?
    05-13-14 09:54 AM
  6. Dodger52's Avatar
    Dodger52
    Succes!

    Posted via CB10
    05-13-14 09:56 AM
  7. wolfee48's Avatar
    wolfee48
    Originally Posted by 1magine
    What are you running? .296 with the SDK radio?
    Negative. No SDK radio.

    Posted via CB10 Z10STL100-4/10.3.0.296
    05-13-14 09:58 AM
  8. 1magine's Avatar
    1magine
    OK. Sounds like escreen works on .296. Something on the SDK, even with all the bars, is preventing it from loading. Wonder what that might be.
    05-13-14 10:22 AM
  9. EgraM's Avatar
    EgraM
    What is escreen?

    Posted via CB10
    05-13-14 10:27 AM
  10. wolfee48's Avatar
    wolfee48
    Originally Posted by EgraM
    What is escreen?

    Posted via CB10
    Not to be rude... but if you have to ask, stay away from it. going to it and changing anything will destroy your device.

    Posted via CB10 Z10STL100-4/10.3.0.296
    05-13-14 10:34 AM
  11. Chuck Foltz's Avatar
    Chuck Foltz
    has anyone tried moving all the bars from between OS's? i only didnt move 2 bars the 100mb ones. Maybe they have some core functions??

    Edit: nvm they do not do jack
    Last edited by Chuck Foltz; 05-13-14 at 04:10 PM.
    05-13-14 10:49 AM
  12. DEV560's Avatar
    DEV560
    escreens works for me on 296. Z10 100-3
    05-13-14 04:09 PM
  13. 1magine's Avatar
    1magine
    Yep. I've confirmed that escreen works on straight .296. Also able to load and use prior escreen. Just not sure if adding in the SDK files will now foul that all up.
    05-13-14 04:17 PM
  14. 1magine's Avatar
    1magine
    Originally Posted by dustanh
    Not to be rude... but if you have to ask, stay away from it. going to it and changing anything will destroy your device.

    Posted via CB10 Z10STL100-4/10.3.0.296
    Your thinking of the full engineering screen. The escreen alone just shows device info. The most important of which is the uptime since last OS, shown in seconds. This is a necessary part of getting into the prior noted, very dangerous engineering screens.
    05-13-14 04:20 PM
  15. Peevish's Avatar
    Peevish
    Wonder if it has something to do with blend/fuse.
    05-13-14 04:23 PM
  16. 1magine's Avatar
    1magine
    Originally Posted by Peevish
    Wonder if it has something to do with blend/fuse.

    Hey P. I don't think so. I think because the SDK is a developer only build they have disabled the backdoor access to the engineering screen, including the escreen. I imagine there is a more direct route that is unknown to the unwashed masses.
    05-13-14 04:27 PM
  17. anon(1049620)'s Avatar
    anon(1049620)
    Anyone manage to get the eScreen showing on 10.3.0.1052? No luck for me. It keeps popping up with the information but never any settings that I can actually access (even after entering the correct PIN generated using the uptime and etc.)
    08-25-14 04:28 PM
  18. wolfee48's Avatar
    wolfee48
    Originally Posted by supraking
    Anyone manage to get the eScreen showing on 10.3.0.1052? No luck for me. It keeps popping up with the information but never any settings that I can actually access (even after entering the correct PIN generated using the uptime and etc.)
    Success here. If it fails once, gotta refresh as the uptime changes.

    Posted via CB10 Z10STL100-4/10.3.0.1052
    08-25-14 06:14 PM
  19. rdijkmans's Avatar
    rdijkmans
    Originally Posted by wolfee48
    Success here.
    I second that. Had no problems accessing eScreen after a non-destructive upgrade from 10.2.2 to 10.3.0.1052...
    08-26-14 07:24 AM
  20. anon(1049620)'s Avatar
    anon(1049620)
    All good now, thanks all!
    08-26-14 04:21 PM
« Hub on 10.3.0.1052 | How can you turn off the emergency call setting? »

Similar Threads

  1. Blackberry Classic Doesn't Have A Touch Screen???
    By ZayDub in forum General BlackBerry News, Discussion & Rumors
    Replies: 41
    Last Post: 05-19-14, 08:46 AM
  2. Type n Go functiionaly in 10.3
    By mughni in forum BlackBerry 10 OS
    Replies: 5
    Last Post: 05-17-14, 12:46 AM
  3. After 10.2.1.3175 leak installed OS ver. change to previous 2941 by itself!
    By Nick Ponomarev in forum BlackBerry Q10
    Replies: 2
    Last Post: 05-13-14, 10:34 AM
  4. Please help me to understand 10.3.0.296 vs Dev SDK. And few more questions
    By yessuz in forum BlackBerry 10 OS
    Replies: 12
    Last Post: 05-13-14, 08:09 AM
  5. 10.3 Idea for Priority Hub Redux
    By Wayne_Enterprises in forum BlackBerry 10 OS
    Replies: 2
    Last Post: 05-13-14, 12:23 AM
LINK TO POST COPIED TO CLIPBOARD