[toums]

Hi, I just really can't understand why the last autoloader is not the best for you? did you try it???

[conite]

Hi, I have a blackberry DTEK50 that's stuck in a bootloop. Could someone possibly send me the old autoloader if they have it? I understand that it basically is just a phone-bricking app at present but let me explain why I'm requesting it.

I've seen that Blackberry doesn't doesn't have any autoloaders available for download, & I called tech support just to confirm such (pure desperation).

I've read through the posts and understand that if the phone has a newer OS than that of the old autoloader then the update will fail and the phone will be bricked. Luckily my phone is bricked already so there's nothing to lose! :-)

Furthermore, my situation is an unusual one in which the old autoloader actually has a chance of working.
You see, I recently fixed this DTEK50, it was unused for the past couple yrs because the screen/digitizer broke & made it unusable. When I attempted to update it I got "update failed", so it's possible that it may have an older OS than the autoloader.

I'd greatly appreciate if one of you guys can send me a link to it. It'll be nice to at least give it a shot before I chuck the phone into a bonfire.

https://mega.nz/#!cBB3VarC!fASas-rIz...I0BNSLG0tsT5xc

[JCMM]

Hello, i'm getting low Wifi signal and network signal on my Passport running 10.3.3.3216 can anyone point me a better radio file to install via sachesi?

Thanks in advance

[conite]

Hello, i'm getting low Wifi signal and network signal on my Passport running 10.3.3.3216 can anyone point me a better radio file to install via sachesi?

Thanks in advance

There weren't any changes to the radio files during 10.3.3.

[torben3d]

Dear Community,

I got a Leap and was trying to wipe it with a autoloader by several post I found here.
Then I got stuck in the mode with the 2x red blink light.

Tried the autoloader posted here, but also receive a communication timeout error.
I found one autoloader where I could proceed to 8% writing, but then also looses connection.

RIM Wireless Device Command-Line Auto-Programmer Version 3.11.0.27 (Win32) [Apr 15 2015 15:51:44]
Copyright 2012 Research In Motion Limited

Connecting to Bootrom: Connected

[       Uploading RAM Image 0x8023E1A0 ] [############## 100 ##############]

QCFMv1/v2 Hybrid File
    containing: IFS, OS, User File System

    IFS/OS Version:        10.3.3.3216 DEV
        Hardware ID:       0x051D0001 RIM BlackBerry Device
        Metrics Version:   3.18
        Build Date:        Feb 21 2018
        Build Time:        17:54:00
        Build User:        developer
        STP Protocol Ver:  0.0.4 (release OS)

    Signature Trailer:
       EC521_512 Signer: 0x48584E51 (QNXH-OS-1)
       EC521_256 Signer: 0x4C584E51 (QNXL-OS-1)
[                  Writing  0x00000000 ] [               0                 ]


Error: Failed to load images.


Error: Communications timed out

Appriciate any hint, thanks in advance.

torben

[brookie229]

Dear Community,

I got a Leap and was trying to wipe it with a autoloader by several post I found here.
Then I got stuck in the mode with the 2x red blink light.

Tried the autoloader posted here, but also receive a communication timeout error.
I found one autoloader where I could proceed to 8% writing, but then also looses connection.

RIM Wireless Device Command-Line Auto-Programmer Version 3.11.0.27 (Win32) [Apr 15 2015 15:51:44]
Copyright 2012 Research In Motion Limited

Connecting to Bootrom: Connected

[       Uploading RAM Image 0x8023E1A0 ] [############## 100 ##############]

QCFMv1/v2 Hybrid File
    containing: IFS, OS, User File System

    IFS/OS Version:        10.3.3.3216 DEV
        Hardware ID:       0x051D0001 RIM BlackBerry Device
        Metrics Version:   3.18
        Build Date:        Feb 21 2018
        Build Time:        17:54:00
        Build User:        developer
        STP Protocol Ver:  0.0.4 (release OS)

    Signature Trailer:
       EC521_512 Signer: 0x48584E51 (QNXH-OS-1)
       EC521_256 Signer: 0x4C584E51 (QNXL-OS-1)
[                  Writing  0x00000000 ] [               0                 ]


Error: Failed to load images.


Error: Communications timed out

Appriciate any hint, thanks in advance.

torben

Make sure you use the Z30 autoloader (same as Leap) and get it here: https://mega.nz/#F!ERomDKaT!YYXwe5p2bUlm_4VW5VfTtw

It is the 2nd last file (1.48 Gb zipped).

[conite]

Dear Community,

I got a Leap and was trying to wipe it with a autoloader by several post I found here.
Then I got stuck in the mode with the 2x red blink light.

Tried the autoloader posted here, but also receive a communication timeout error.
I found one autoloader where I could proceed to 8% writing, but then also looses connection.

RIM Wireless Device Command-Line Auto-Programmer Version 3.11.0.27 (Win32) [Apr 15 2015 15:51:44]
Copyright 2012 Research In Motion Limited

Connecting to Bootrom: Connected

[       Uploading RAM Image 0x8023E1A0 ] [############## 100 ##############]

QCFMv1/v2 Hybrid File
    containing: IFS, OS, User File System

    IFS/OS Version:        10.3.3.3216 DEV
        Hardware ID:       0x051D0001 RIM BlackBerry Device
        Metrics Version:   3.18
        Build Date:        Feb 21 2018
        Build Time:        17:54:00
        Build User:        developer
        STP Protocol Ver:  0.0.4 (release OS)

    Signature Trailer:
       EC521_512 Signer: 0x48584E51 (QNXH-OS-1)
       EC521_256 Signer: 0x4C584E51 (QNXL-OS-1)
[                  Writing  0x00000000 ] [               0                 ]


Error: Failed to load images.


Error: Communications timed out

Appriciate any hint, thanks in advance.

torben

After downloading the correct autoloader, use a different cable,port, or even PC.

[torben3d]

After downloading the correct autoloader, use a different cable,port, or even PC.

Thanks a lot, the spare laptop made the difference everything else was the same (cable, autoloader)

[Redfox01]

Hi guys, can someone explain to me how I can install this OS, since I'm new to autoloaders, thanks!

[conite]

Hi guys, can someone explain to me how I can install this OS, since I'm new to autoloaders, thanks!

Which device do you have? Which variant specifically?

[Redfox01]

BlackBerry z10 STL100-2

[Redfox01]

Z10 stl100-2

[conite]

Z10 stl100-2

Download and unzip autoloader to PC, plug in your device, and run the autoloader. Your device will be wiped in the process.

https://mega.nz/#!UEwkxLTa!Q3y5xKCE4...dkG3EInalY18_g

[imradlol]

Hey guys, I'm looking for some older bb10 os's. I've got a dev alpha b i've been messing with, and I'm trying to find a few 10.0.10 and older, and also some 10.2.x autoloaders. Does anyone have any working links to some? I've downloaded the ones off blackberry's website, but I wanted a bit new ones

[gaming hackers]

Hey guys,I'm looking for a 10.2.1 os for blackberry z10 stl100-4 bundle 3247 and a red light is blinking 2x times after flash pls help. Thanks in advance

[conite]

Hey guys,I'm looking for a 10.2.1 os for blackberry z10 stl100-4 bundle 3247 and a red light is blinking 2x times after flash pls help. Thanks in advance

Once on 10.3.2, you can't go back to anything older.

Once on 10.3.3 you can't go back to 10.3.2 or anything older.

Just install the latest:

https://mega.nz/file/VEwCUKST#OqxRdb...QocXpbSIJCehrQ

[TRANCE1]

Hi everyone! I'm running 10.3.1. on a Q10, SQN100-3. But I'm looking to go back to the last 10.2.1 update, but I cannot for the life of me find the autoloader link for it. I'd really appreciate some help. It's mainly due to the call volume being lowered considerably on 10.3.1. that I want to go back to 10.2.1. Is the latest 10.2 version 10.2.1.2228 or should I go with 10.2.1.1925?

[conite]

Hi everyone! I'm running 10.3.1. on a Q10, SQN100-3. But I'm looking to go back to the last 10.2.1 update, but I cannot for the life of me find the autoloader link for it. I'd really appreciate some help. It's mainly due to the call volume being lowered considerably on 10.3.1. that I want to go back to 10.2.1. Is the latest 10.2 version 10.2.1.2228 or should I go with 10.2.1.1925?

We don't keep old loaders around anymore.

What many people have done is use a really, really loudly recorded ringtone.

Btw, you should be on the latest 10.3.3.

https://mega.nz/file/RJJWTTzT#USoRTN...Bcej8X1VLRT6NU

[TRANCE1]

Ok I can live with the call volume, but I'd need to know one thing about 10.3.3. With 10.3.1 if I switch to desktop mode in youtube, I can play videos even when minimized, or even when phone is locked with screen off I can listen to the video and adjust audio or pause with side buttons. Does the browser still have this ability in 10.3.3? Because modern phones don't seem to!

[conite]

Ok I can live with the call volume, but I'd need to know one thing about 10.3.3. With 10.3.1 if I switch to desktop mode in youtube, I can play videos even when minimized, or even when phone is locked with screen off I can listen to the video and adjust audio or pause with side buttons. Does the browser still have this ability in 10.3.3? Because modern phones don't seem to!

You can still do that, yes.

[TRANCE1]

Thanks for your help, can update with peace of mind now.

[TRANCE1]

Hey Conite. The craziest thing happened. I did an OTA update to 10.3.3.3216, and a few things stopped working properly, dictionary wouldn't pop-up for misspelt words, keyboard input was lagging a bit, CPU usage was spiking to 40% every couple seconds, call volume was still very low. Bit of a wreck, but still usable.

I used it for a couple days then did a Security Wipe. And would you believe it fixed ALL the issues including the call volume!

The crazy thing is that the phone came with 10.3.1 from the factory, and had low call volume to start with, which did not change after updating to 10.3.3, but after the security wipe the call volume has jumped, I can actually get the speaker to distort with the stock ringtone it's that loud.

Anyway, I'm just really happy with my Q10 now. I haven't experienced any double typing and the phone is smooth. First and foremost I love BBOS10's features and layout. I feel very lucky. Just wish I hadn't read so many nightmare stories about 10.3.3, when it could all be resolved with a security wipe.

[conite]

Hey Conite. The craziest thing happened. I did an OTA update to 10.3.3.3216, and a few things stopped working properly, dictionary wouldn't pop-up for misspelt words, keyboard input was lagging a bit, CPU usage was spiking to 40% every couple seconds, call volume was still very low. Bit of a wreck, but still usable.

I used it for a couple days then did a Security Wipe. And would you believe it fixed ALL the issues including the call volume!

The crazy thing is that the phone came with 10.3.1 from the factory, and had low call volume to start with, which did not change after updating to 10.3.3, but after the security wipe the call volume has jumped, I can actually get the speaker to distort with the stock ringtone it's that loud.

Anyway, I'm just really happy with my Q10 now. I haven't experienced any double typing and the phone is smooth. First and foremost I love BBOS10's features and layout. I feel very lucky. Just wish I hadn't read so many nightmare stories about 10.3.3, when it could all be resolved with a security wipe.

The autoloader method would have done the same.

Glad it works though.

[imradlol]

Did anyone make a mirror of the original archive? I'm working on archiving as much blackberry stuff as I can and would love to have the older firmwares on there

[conite]

Did anyone make a mirror of the original archive? I'm working on archiving as much blackberry stuff as I can and would love to have the older firmwares on there

Honestly, anything older than the latest is a waste.

Since it has downgrade protection, you can't go back anyway.

It's also the only version with both the Krack patch and the Broadcom patch. So you wouldn't want to be using anything else.