BerryLeaks Presents: 10.2.1.641/725 bars for 10.2.1.575/641 for all devices (except STL100-1)

Originally Posted by LP_Rigg

Thanks for the updates:

Updated bars working (for me) on 10.2.0.1791

sys.sysmon
sys.settings
browser
clock
compass
calculator
camera
dxtg - all (docs to go)
AdobeReader
Hotspot Browser
sys.android 10.2.1.20
sys.android.shell 10.2.1.13

Note: restarted by holding down the volume keys for updated runtime to reset and work

stl 100-3 AT&T

Nice...going to load these now and see how it runs...had quirky issues with the two previous runtimes.

Originally Posted by usman_hidayat19

Yes you're right

Posted via CB10

Nice

Will try to load this up tonight

Originally Posted by zoozzooz123

You just liars BerryLeaks,
You just complain it won't work in stl100-1
You LIARS
Even you can MAKE Leaks on stl100-1 but because this device MIDDLE EASTREN Model

:cant-watch: *smh*

Originally Posted by toobs623

i don't know for sure, but I'm pretty sure blkscorp was running it with no issues

Contradicting yourself? :laughing:

Originally Posted by KemKev

Contradicting yourself? :laughing:

How so?

Posted via CB10

What was the message? No response. Hotspot Browser?

Originally Posted by zoozzooz123

Sorry for my overreacting
OK now I am using that stl100-1, and can I load these bar files and I am using 10.2.0.1767?

Z10STL100-2/10.2.0.1767

:straight-face:

Originally Posted by zoozzooz123

You just liars BerryLeaks,
You just complain it won't work in stl100-1
You LIARS
Even you can MAKE Leaks on stl100-1 but because this device MIDDLE EASTREN Model

Z10STL100-2/10.2.0.1767

Wow!

Post of the Week! :rolleyes:

Now......step away from the computer, put your helmet back on, and put down the Red Bull.

First posted in the .575 topic, hoping for a response here, the issue still persists for me on this hybrid and I cannot find another mention of it:

Issue

Device Model: SQN100-3.
OS: 10.2.1.575, with .641/.725 .bar package and .1791 Runtime.
Install method: clean install of .575 (no restore), loaded .1791 Runtime, loaded .641 files, loaded .725 files. I only loaded the updated files, and rebooted after each step to be sure.
Issue/Question: Voice Control not opening (mute button/app icon, both do not respond), does not show as 'running' in App Manager.
Cause: Unknown, I did not load any .bar file related to Voice Control, (afaik) they are still the .575 version.
Attempt to resolve: Rebooting (restart, and "hard" reset), turning on/off in Settings app/changing settings. Mute key still works for media control.

Originally Posted by amanago

I am also on 1791.. and would love to load these 641/725 hybrid. Can I know what are the bar files you've sideloaded from 641/725 hybrid?

Thanks. :D

Here's what I usually load from a newer OS. I am not sure what is available in this pack, because I make my own hybrid. Keep in mind that some are not always updated, but I just generally load it over anyways, because I'm too lazy to check. I know the ones from 10.2.1 I've listed below work on 10.2, so give those a try :)
sys.sysmon
sys.settings
browser
clock
compass
calculator
camera
dxtg - all (docs to go)
AdobeReader
maps
bbm
appworld
weather
voice control

I added a few from the previous list someone posted. Keep in mind that I didn't put in the runtime. They are making serious changes to the runtime, so it's been wonky for me, even on 10.2.1 itself. I personally still use 1791 runtime, until something better comes out. So far, I've found nothing :(

Does wifi calling works for you and was any of the bar files crashed? Thanks.

Originally Posted by smartbuddy

Can you upload just the above bars as a separate package pls ... Thanks.

I have uploaded the bars that work on 1791 and other 10.2.0.1xxx OS. Check the link below
http://forums.crackberry.com/bb10-le...-2-0-a-860154/

Originally Posted by masterscarhead1

Here's what I usually load from a newer OS. I am not sure what is available in this pack, because I make my own hybrid. Keep in mind that some are not always updated, but I just generally load it over anyways, because I'm too lazy to check. I know the ones from 10.2.1 I've listed below work on 10.2, so give those a try :)
sys.sysmon
sys.settings
browser
clock
compass
calculator
camera
dxtg - all (docs to go)
AdobeReader
maps
bbm
appworld
weather
voice control

I added a few from the previous list someone posted. Keep in mind that I didn't put in the runtime. They are making serious changes to the runtime, so it's been wonky for me, even on 10.2.1 itself. I personally still use 1791 runtime, until something better comes out. So far, I've found nothing :(

There is no bbm, maps, voice control or weather bar files in the folder.

Originally Posted by barohatoum

Wow... first page post... I guess everybody is busy with the BBM4ALL launch...

Here's what's new that i found

new airplane mode at the main page of settings
Attachment 212842

and lockscreen settings in security and permission
Attachment 212843

other than that nothing. but i found it a bit more snappy.. dont know maybe psychological
Posted via CB10

You only install: sys.settings or also sys.settings account (this is full black modes z10?)

I only installed sys.settings and I have whats in both images

Originally Posted by BlackScorpion3

I have had no issues with wifi on runtime with any builds yet.

Sent from my Mind Controlled BerryLeak Hybrid running 10.2.x.xxx while drunk

The issue is not with wifi... it's with the runtime getting data when wifi is off ( over 3/4G)

Posted via CB10

Originally Posted by R0BSTA

I only installed sys.settings and I have whats in both images

thanks that's what i thought but sys.setting account does it swipe something and has it black theme for Z10 compleet included hub etc.

also have Q about sys.sysmon is this the one who also showing you data/internet usage?


My BB OS is one crazy sys.mix. Still working get base of 1433,575 and 1767 and camera from older version and now again getting some update from here and there. love my BB10.

Originally Posted by DeLuffy

Team failed
where u kris we need leaks for -1 :(

Posted via CB10

FFS...it is NOT in the control of the team to make these leaks, I'm sure if they could they'd incorporate STL100-1 users too!

Also Adam from the team has an STL100-1 stop b!tching!

Thx for the leak guys! Nice work again!
Some changes I found (or maybe never saw before - w/e sharing is caring, correct me if I am wrong!)

Clock bar - world clock shows weather information icons and some more detail if clicked.
App World - does provide a section "More from developer" above "Others also downloaded" (not sure if that was already there in an earlier release). More menu seem to feature "Developer Website" and "View Privacy Policy" if provided (not sure if that's new)


BTW: I am running all of http://forums.crackberry.com/bb10-le...-2-0-a-860154/ bars on 10.2.0.1767 (software release 10.2.0.415) and they seem to work fine for now.

In system setting everythings works except Blackberry id . It crash when i will open so BB maybe a glitch?

also lovethe device monitor but don't know why with some grafiks it looks like someone use dirt to fill it in.

Originally Posted by whatsever

In system setting everythings works except Blackberry id . It crash when i will open so BB maybe a glitch?

also lovethe device monitor but don't know why with some grafiks it looks like someone use dirt to fill it in.

BlackBerry ID crashes for me too.

STL3 1791 hybrid w/10.2.1 bars

I need old 10.2.0 accounts.bar file
Please
Please

Z10STL100-2/10.2.0.1767

Originally Posted by zoozzooz123

I need old 10.2.0 accounts.bar file
Please
Please

Z10STL100-2/10.2.0.1767

this is from 1791. it should work for you. I had to rename it to .zip to upload here. just rename the extension back to .bar and sideload.

Thanks team.

Not sure if it has been mentioned, but BB Channels now shows up in my Beta Zone app again! It was pretty bothersome to keep using the auto-loader, so I am sure some people have been waiting for this to come back! I do not know if it shows up for all 10.2.1.xxx versions, but after loading this hybrid it did for me.