[LP_Rigg]

Solid build, everything working great including rfa.

And, network speed AT&T LTE smokin it...




Posted via CB10

[hsmithc]

This may have been addressed, but I searched the thread and found nothing. I liked being able to reply to declined calls on .1047. I don't find that in .1371. Am I over looking it?

I have Verizon Z10
STL100-4
10.2.0.1371

[Phill_UK]

This may have been addressed, but I searched the thread and found nothing. I liked being able to reply to declined calls on .1047. I don't find that in .1371. Am I over looking it?

Phone > Settings > Priority Calling > Reply Now = On

[spike007]

Running this leak which is awesome. Just makes me think what is bb11 going to be like.

[mopar_fxr]

OK. Been running this since yesterday afternoon. All is good, still shocked I got a restore but none the less would have been fine without. Battery for me is even better than the previous, but did notice that I had a couple if the "quirks" I've seen mentioned on threads from previous leaks. Thinking it has to do with the restore since I have been running clean each time before and never had them. The biggest was the phantom camera icon in the app screens... funny thing though is if you hit the area the icon was, it still works. almost a cool feature but since hard reboot all is back to normal again.
But, all in all, seems to be a hair more graceful.
Thanks toobs and the rest of the team.

Posted via CB10

[Animatrix86]

For that kind of statement, it would be nice to know what cell company you are with for more troubleshooting.

I'm with Rogers and LTE has either been the same if not more available in some areas that have been spotty before.


Check out my "Facepalm" channel: C0001F676

Sorry, I had mentioned the LTE not being there earlier in this forum, so I forgot to mention the fact that I'm having this issue with an AT&T Z10. Had LTE everywhere while on 10.0 and 10.1, but don't have it while using 10.2....

Posted via CB10

[smis]

Does the previous leak have the better voice command?

Posted via CB10

[jstarett]

Reread and didn't see where it was listed but did it anyways and it works now thanks...

Install BBM Channels as per the OP

Posted via Q10 running 10.2.0.xxxx | BerryLeaks Co-founder

[jstarett]

I am finally on ATT LTE but not getting nowhere near that speed... 8mb down 5mb up....:/

Solid build, everything working great including rfa.

And, network speed AT&T LTE smokin it...




Posted via CB10

[LP_Rigg]

I am finally on ATT LTE but not getting nowhere near that speed... 8mb down 5mb up....:/

I am in Atlanta and have solid coverage. My avg speed in the metro is about 40MB. It will range, though, between 20 and 70MB depending on traffic. My friends with i5's and S4's on the same network do not have the same results as me.

Suck's for them....They could have bought a Z. Yes, some of them have buyers remorse after seeing my Z in action.

Posted via CB10

[hsmithc]

Phone > Settings > Priority Calling > Reply Now = On

Thank you

Z10 of Texas

[toobs623]

FYI everyone, new runtime just dropped.

BerryLeaks

[BlackScorpion3]

FYI everyone, new runtime just dropped.

BerryLeaks

You could have stated: new unlocked runtime just dropped. No need for debug tokens...

Posted from my BerryLeak mind controlled Z10STL100-4/10.2.0.1xxx LE, while drunk

[PowderJockey]

Is it going to be possible to change the colour of the toast notifications?

Or does this speak to themes?

ZED-10 for the person on the move. OS 10.2.0.1047

[mopar_fxr]

You could have stated: new unlocked runtime just dropped. No need for debug tokens...

Posted from my BerryLeak mind controlled Z10STL100-4/10.2.0.1xxx LE, while drunk

But that would have kept some from asking questions.... and needless posts... and... oh... darn... sorry...

Posted via CB10

[tickerguy]

Does the previous leak have the better voice command?

Posted via CB10

This one has the Wolfram voice command -- if you ask it something like "How tall is the empire state building?" it will figure it out.

[Alejo Rivadeneira]

BerryLeaks presents 10.2.0.1371
STL100-2/3/4

It�s our pleasure to present to you 10.2.0.1371 for STL-100-2/3/4 ONLY.
It�s not out pleasure to present you anything for STL100-1 so don�t ask. We are not giving anything out for this device with this leak! So DO NOT ASK! And Yes, we are sorry for that.

The procedure is the same for each device, inside each file is an autoloader for each device; along with a .txt file with the MD5 and SHA-1 values of the autoloader. Please select the correct OS for your model device. If you don't know which model you have, in any text or BBM field type "myver" - without the quotation marks - and tap the space bar, and the info you need will appear, alternatively in Setting > About, you will also find it as well.

Back up all device info! The running of an autoloader *.exe file is a destructive process! You will lose all data on your device, and if your memory card is encrypted, you will lose all data on your memory card! Please make sure to backup all information and decrypt your memory cards before going any further!

After backing up all information, to your selected locations, SHUT DOWN LINK (if you used it for your back up), set your device to airplane mode, connect to your device via USB to the computer. Unzip the downloaded zip file to your desktop, and start the .exe. Enter any password info, hit enter, and go make a sandwich, take a shower, whatever�. Once you see the Welcome Screen on your device, detach from USB, and perform setup. Follow ALL setup prompts. The following link is a detailed walkthrough of how to load the file onto the device (there is even a video): *Installing Leaks*

Disclaimer:
As per usual we at BerryLeaks and those at Crackberry are NOT responsible for any damage done to your device.


STL100-2/3/4
MEGA: https://mega.co.nz/#!5p8TiY5S!VaUerF...wLqnBQVM5u1kDM
Google Docs: https://goo.gl/NgEjTs

The following devices are NOT supported:
STL100-1

The following devices support the OS but not the Radio:
SQN100-X, SQR100-X
If you choose to install on these devices you will have NO phone calls. If you still wish to proceed download the autoloader, split the signed files using sachesi, compile a new autoloader with OS ONLY and install.

The following is a list of changed files from the last leak:

Our last leak was 10.2.0.1323 the following list are the updated files in 10.2.0.1371
com.rim.bb.app.adobeReader-10.1.6.43
com.rim.bb.app.facebook-10.2.1.13
sys.android.shell-10.2.0.89
sys.android-10.2.0.89
sys.appworld-4.4.0.85
sys.bb_screen_reader-1.0.0.70
sys.bbm-10.2.0.39
sys.browser-10.2.0.40
sys.btviewer-10.2.0.62
sys.calculator-10.2.0.143
sys.camera-10.200.0.56
sys.cfs.box-1.2.0.74
sys.chat-10.2.0.387
sys.chatblend-10.2.0.353
sys.clock-11.20.0.152
sys.data.carrier_data-10.2.0.366
sys.data.quip.authtokens-10.2.0.413
sys.dxtg.launcher-10.12.0.85
sys.dxtg.sstg-10.12.0.85
sys.dxtg.stg-10.12.0.85
sys.dxtg.wtg-10.12.0.85
sys.escreens-10.2.0.681
sys.filepicker-10.11.0.108
sys.firstlaunch-10.2.0.7387
sys.help-10.2.0.17
sys.hotspotBrowser-10.2.0.40
sys.howto-10.2.0.28
sys.invokeTargetSelection-1.0.0.53
sys.miracastviewer-1.0.0.80
sys.mmagic-10.2.0.54
sys.paymentsystem-10.2.3.153
sys.perimeterbrowser-10.11.0.108
sys.phone_settings-10.2.0.632
sys.phone-10.2.0.484
sys.pim.attachments.card-10.2.0.531
sys.pim.calendar.viewer.eventcreate-10.102.1.476
sys.pim.calendar.viewer.ics-10.102.1.476
sys.pim.calendar.viewer.nav-10.102.1.476
sys.pim.calendar-10.102.1.476
sys.pim.contacts-10.5.200.344
sys.pim.email.card-10.2.0.574
sys.pim.email.composer.card-10.2.1.545
sys.pim.messages-10.2.0.572
sys.pim.remember-10.2.0.567
sys.places.cards-10.2.0.54
sys.rcse-10.2.0.297
sys.settings.accounts-1.0.0.128
sys.settings-10.2.0.7619
sys.settings2-10.2.0.7550
sys.setupbuffet-10.2.0.7529
sys.smartcalling-10.2.0.307
sys.smarttags-10.2.0.397
sys.socialconnect.facebook-10.1.1.83
sys.socialconnect.linkedin-10.1.0.186
sys.socialconnect.twitter-10.1.1.83
sys.socialconnect.youtube-10.1.1.83
sys.videochat-10.2.0.15
sys.voicemailcompose-1.0.0.68
sys.voicemailsetup-10.2.0.59
sys.weather-10.2.0.124
sys.wifisendcard-10.2.0.13

The following is a list of found defects or general notices:

Issue: Evernote app not working
Solution: Use Remember app integration

Issue: Twitter account might not get restored properly.
Solution: Delete and recreate on the device.

Issue: Android runtime still occasionally has no internet connection error.
Solution: Reset device by holding down power button until boot screen appears. This seems to work better than a full hard reset for this issue.

Fixed: BlackBerry Protect will stay on after reboot now.

Fixed: Battery drain anomaly from 1323 seems to be fixed.

Issue: BlackBerry World �Installed Apps� tab shows only core apps after restore. Other apps will appear in the �Available� tab.
Solution: Download app again from �Available� tab. Known problem in 10.2 leaks so far.

Issue: Notifications for pictures within BBM groups do not always work
Solution: None

General Notice: New BSIS setting in About > Hardware. The signing keys are linked to your
devices BlackBerry ID in use.

General Notice: Android Runtime seems to initialize and load apps quicker.

General Notice: New notification sounds.

General Notice: Lock Screen Notification is working.

General Notice: More Mobile Hotspot fixes

General Notice: Remember allows sorting

General Notice: Still no Wi-Fi Direct for Z10 devices.

General Notice: New display settings link in notifications settings.

General Notice: One of the Chinese keyboards have been removed.

General Note: Use of Advanced options required for EAS accounts setup. Especially for the forever length sync.

General Note: After a restore, when re-entering accounts information: deleting the accounts
and re-adding them fresh is recommended or delete prior to backup.

General Note: Wi-Fi settings are remembered after reboot.

General Note: Better configuration checks in VPN config page.

For FAQ and other helpful information please visit us on our wiki page: *BerryLeaks* or download our app from BlackBerry World: *BerryLeaks App*. And as always, you can contact us in the forum for any needed help.


Please note, to make things run as smooth as possible we have created the following template to use for your questions on the forum. This is to ensure we receive the information needed to answer your questions.

Device: Q10/Z10/Q5
Device Model: SQN/SQR/STL100-X
Issue/Question: Be as specific as possible
What action caused the issue? ie opening X app, turning on X function
What did you try to resolve the issue? ie reboot, reload OS, change settings etc

Questions posted without this information may not be answered the team, as we do not have the necessary info to know how to help.


Be polite and have FUN!!!

7-Zip Download Link

7-Zip

[LP_Rigg]

You could have stated: new unlocked runtime just dropped. No need for debug tokens...

Posted from my BerryLeak mind controlled Z10STL100-4/10.2.0.1xxx LE, while drunk

Does it work on 9810? /JK

Posted via CB10

[PowderJockey]

Does it work on 9810? /JK

Posted via CB10

Would think it was aimed at the BlackBerry 10

ZED-10 for the person on the move. OS 10.2.0.1371

[moody]

I am in Atlanta and have solid coverage. My avg speed in the metro is about 40MB. It will range, though, between 20 and 70MB depending on traffic. My friends with i5's and S4's on the same network do not have the same results as me.

Suck's for them....They could have bought a Z. Yes, some of them have buyers remorse after seeing my Z in action.

Posted via CB10

COOL!!! I thought I was only one in GA w/ a BlackBerry!! I'm about 30 min to 2 hrs (depending on time of day LOL) north of Atlanta.

Posted using my white Q10 via the very addicting CB10 app

[moody]

Does it work on 9810? /JK

Posted via CB10

AND I have a 9810!

Posted using my white Q10 via the very addicting CB10 app

[Norg]

I rolled back to 1047 since my battery was discharging far too quickly once I upgraded to 1371. Anybody else have this issue ??

STL100-3 / 10.2.0.1047 / AT&T

[toobs623]

You could have stated: new unlocked runtime just dropped. No need for debug tokens...

Posted from my BerryLeak mind controlled Z10STL100-4/10.2.0.1xxx LE, while drunk

True

BerryLeaks

[11pts]

I rolled back to 1323 since my battery was discharging far too quickly once I upgraded to 1371. Anybody else have this issue ??

STL100-3 / 10.2.0.1323 / AT&T

Mine discharged and over heated like crazy for the first 8 hours or so, but after that it settled down really well. The battery life started lasting much longer and the temperature was under control

Posted via CB10

[dusdal]

Thank you

Z10 of Texas

I just tested this. It's well implemented IMO.

You set three different replies, then when you ignore a call the three options you set pop up. Touch the appropriate one and it sends. Cool.

It also prioritizes the medium used for the reply. For instance the person I tested it with has BBM so it automatically send the reply via BBM instead of sms.

Posted via CB10