You Can " OVERRIDE " , the notification volume From Settings. By turning Override Volume ON , Notification Volume Sounds Louder as same as Audio,MP3 & Video etc.:cool:
This might help you :)
Printable View
You Can " OVERRIDE " , the notification volume From Settings. By turning Override Volume ON , Notification Volume Sounds Louder as same as Audio,MP3 & Video etc.:cool:
This might help you :)
Plenty of people have already told, in here !!!
OS 10.3.1.1151 Fixes & Findings - Page 22 - BlackBerry Forums at CrackBerry.com
you might have not completed full setup after signing to bbid. First complete full setup on device then connect with bblink. I had similar issue but got it resolved.
Thanks for your reply, i asked because i installed the OS .1016 and found that the volume is low, even the override option.
have you tried the .1151?
It happened with me some time back. You have to install all three Core OS, Radio & all Apps.
Hello hay alguien que habla espaol?
Posted via CB10
Tengo una duda
Sale versin software 10.3.1.745
Y versin del SO 10.3.1.1151...
Posted via CB10
I have peculiar issue of z10 screen light / display getting on every few minutes even screen timeout kept at 20 seconds after installing 10.3.1.652 of STL1-3. Can you help whether anybody facing similar issue? Due to this battery is getting consumed early.
Posted via CB10
My standard operations for autoloader is DO NOT CONNECT THE DEVICE TO PC > "right click exe file" > click run as administrator > when the pc screen show waiting fot bootrom : ..... CONNECT DEVICE TO PC VIA USB PORT and WITHOUT BATTERY IN THE DEVICE (worked perfect on Z10 stl100-1, z10 stl100-2, Q10 sqn100-3) for Z30 The battery is build-in :-))
Can someone please help with bitcasa autoloader link?
Posted via CB10
Setup does not start after re-boot so Link will not connect to the phone and will keep telling that setup is not complete. I had to revert to 10.3.0
In the first post !!!
https://drive.bitcasa.com/send/2H1RJ...2-bO8oX_oGU4KC
First time trying to install a leaked OS. Have zero knowledge about it. Went with Sachesi (non-destructive). Current OS is 10.2.1
After following the steps outlined in a detailed yet simple guide from one of the earlier posts in the original thread, I arrived at the last step, which is install. However, when I clicked on the install folder and select the folder I want to install from, it shows me:
'Sachesi has determined you may not have enough free space on your device to continue this update.
It is estimated that you would need 0.512GB but you only have 0GB. Please free up some space.'
I don't have an SD card installed but I've got over 9GB of space on my device. Fully backed up on Link as well.
Also, the moment I connect my device to my comp, Sachesi says 'error authorisation'. If that helps. Thank you.
I use a Q10.
Posted via CB10
Open your browser. Go to : oobe:// it will as for running initial setup. Do it. After setup completes, do a hard reset (remove battery for 10minutes). Setup should run when you boot your phone.
bookmarks not opening after browsing websites
Posted via CB10
I'm curious as well as last leak I tried my wife's q5 and got the same error. But she has an SD card. Unless emails and crap use up space ? I really don't know.
I just thought of this, plug the phone in and open all the folders using windows and see if you can delete anything in your media folder.
Posted via CB10
Hey everyone, ended up taking an impromptu trip to Niagra
Attachment 314875
So I haven't been keeping up. I'll be finished driving in a few hours, then I have 10 pages to read and I'll update again.
Taken with my passport btw
Posted via CB10
Hola Eduardo,
Estaba yo esperando a alguien que hable o escriba en tu lengua mejor que yo, pero de no ser posible, puedo tratar de ayudarte. Veremos. Entonces, expl�came �cu�l es tu problema? Si no tengo la respuesta, traducir� la pregunta y la escribir� en ingl�s aqui.
Ken
Damn, I can't get the ****er to connect to sachsie anymore on linux
SLT-100-3 auto loader left me with a blinking red LED. Trying a 3rd flash (second had the same results as the first) with a freshly downloaded autoloader.
How do I fix this if I'm left with a bricked device again?
You sure you have the correct loader.
Posted via CB10
Yup, don't see any indication that it would be the wrong one
OK were good now, must have gotten corrupt somehow
I have one quick question about Mega. Where does it download too? I am using Chrome and I know where my download folder for Chrome is but the last 3 times I downloaded an Autoloader from Mega it is nowhere to be found. Usually during a download there is a temporary file showing for downloads. That is not the case with Mega. I have created a mega account also but no luck. Does anyone have an explanation? 3 hours for a download eats a big chunk of the day if I dont end up with a download. I am also running Windows 10 tech preview.
Yes, used the autoloader for my -4 and it is working great!
Z10 -4 10.3.1.1151
Leak loaded! Problem though, I'm seeing that I shouldn't restore Blackberry Runtime so when I go to restore, I select Custom but only see 3 options--Application Data, Media, and Settings. I do not have the option to pick which apps from Application Data to restore?