[sev7en]

Dear Community,
I'd like check this new AWESOME firmware but anytimes I run the installer, the phone reboot and it goes like in loop (always reboot).
I removed the device password and also run the application as Administrator (Windows 7 Professional) with no success.

Anyone can help me?


Cheers,

[cmdrkeen86]

The autoloader reboots the phone to connect to the bootloader. Are you getting to this point and then the phone reboots or is this what is happening?

[LillyFox]

Phone will reboot once before install then you will see a green light then it reboots again.... do make sure you are using the correct autoloader/radio comb as well. berryleaks.wikidot.com best resource for you

Lilly's hand stitched Frankensteined Z30 powered by 10.2.1.(latest Leak)

[sev7en]

Yes, first of all thanks for getting me back sooner.
The phone reboot then instead to start the flashing procedure, I run again the old OS. On the Windows' prompt I see only the usual voices entering the bootrom and resetting the device, nothing more.

[cmdrkeen86]

Phone will reboot once before install then you will see a green light then it reboots again.... do make sure you are using the correct autoloader/radio comb as well. berryleaks.wikidot.com best resource for you

Lilly's hand stitched Frankensteined Z30 powered by 10.2.1.(latest Leak)

This. The autoloader/radio combo is important, but even if wrong it should still load but throw an error when the phone boots. Are you plugging it into a USB 2.0 or 3.0 port? If 3.0 move it to a 2.0 port, 3.0 isn't that great for doing these sort of operations.

[LillyFox]

Make sure your file fully downloaded from mega.... incomplete file could cause this

Lilly's hand stitched Frankensteined Z30 powered by 10.2.1.(latest Leak)

[robsteve]

Try using a different USB port on the computer. Do not plug into a USB hub. On some computers, the front USB ports can be a hub. Use the back USB ports.

Also reboot the PC prior to trying again and make sure BlackBerry link is closed when you try the autoloader.

[sev7en]

Hi there,
when reboot, it shows only the RED led not the GREEN and I don't have any error code... I tried several USB port, 2.0 and 3.0 with no success.

Which one is the rom you flashed?

[LillyFox]

Hi there,
when reboot, it shows only the RED led not the GREEN and I don't have any error code... I tried several USB port, 2.0 and 3.0 with no success.

Which one is the rom you flashed?

Seriously Download another .1055 OS file for your device and try again...... make sure it downloads completely

Lilly's hand stitched Frankensteined Z30 powered by 10.2.1.(latest Leak)

[cmdrkeen86]

Download this one http://l.bitcasa.com/N0gG0cO_

[Uzi]

Hi there,
when reboot, it shows only the RED led not the GREEN and I don't have any error code... I tried several USB port, 2.0 and 3.0 with no success.

Which one is the rom you flashed?

did you install BlackBerry link on your pc?

Q10SQN100-3/10.2.1.123456789

[cmdrkeen86]

It this doesn't work you might have a defective unit.

[sev7en]

Hi,
maybe I got a damaged image file but I am downloading it from bitcasa and it is really slow. Does anyone as a MEGA link?

Just a question... if I got a corrupt file, when run, it doesn't show an error code?

[Uzi]

Hi,
maybe I got a damaged image file but I am downloading it from bitcasa and it is really slow. Does anyone as a MEGA link?

Just a question... if I got a corrupt file, when run, it doesn't show an error code?

can you post the pic of your pc? capture it

Q10SQN100-3/10.2.1.123456789

[cmdrkeen86]

There are no mega links, yes bitcasa is slow. You'll have to deal with it like everyone else. If it was corrupt it will not necessarily show an error code. Make sure you have a recent (e.g. 9.20) version of 7zip installed or you wont be able to extract. I had downloaded like 8 times before I realized this.

[cmdrkeen86]

While you're waiting, just for kicks and grins, on your device, go to settings > about and take a screen capture and upload it here, k?

EDIT: feel free to blur out serial number and bbid

[sev7en]

Hi to all and thanks, to all... this community as usual is the best!

cmdrkeen86: The model is STA100-2 and the OS Version is 10.2.0.1791 for the About section. I downloaded the file 3 times always with the same result.

The expanded image file is about Z30_10.2.01.1055_STA100-1-2-3-4-5-6.

[Uzi]

Hi to all and thanks, to all... this community as usual is the best!

cmdrkeen86: The model is STA100-2 and the OS Version is 10.2.0.1791 for the About section. I downloaded the file 3 times always with the same result.

The expanded image file is about Z30_10.2.01.1055_STA100-1-2-3-4-5-6.

did you extract the file?

Q10SQN100-3/10.2.1.123456789

[Uzi]

op you very slow to response anything you can pm

Q10SQN100-3/10.2.1.123456789

[sev7en]

Hi, yes, I extracted the file with no issues... sorry for the delay but it's 1:00 am here ^^

[Uzi]

Hi, yes, I extracted the file with no issues... sorry for the delay but it's 1:00 am here ^^

its ok my bad 5:06:15 AM here sleepy Lol
did you closed BlackBerry link when you run the autoloader?


Q10SQN100-3/10.2.1.123456789

[sev7en]

its ok my bad 5:06:15 AM here sleepy Lol
did you closed BlackBerry link when you run the autoloader?


Q10SQN100-3/10.2.1.123456789

LOL
Goodmorning! I never closed it before... but I will do that now as test, thanks!

[Uzi]

LOL
Goodmorning! I never closed it before... but I will do that now as test, thanks!

yes you have to closed the BlackBerry link to run the autoloader

Q10SQN100-3/10.2.1.123456789

[zymenth]

usually before running a bootloader..

1)backup with BB LINK
2)Close and exit BB Link
3)make sure ur battery around 70%
4)run boot loader (if u have device password type them in)
5)green light means it flashing the rom
6)the device will boot the new OS

thats all