1. Reverand Jim's Avatar
    Is there a way to remove the clip from the holster/case i got with my bold?
    06-26-09 05:45 PM
  2. amazinglygraceless's Avatar
    Not without making a complete mess of it.

    Have you considered one of these: http://shop.crackberry.com/blackberr...medium=content
    06-26-09 05:51 PM
  3. greydarrah's Avatar
    If your looking for a similar case without the clip, take a look at the shopcrackberry.com pages. There are a number of options.
    06-26-09 05:57 PM
  4. Username00089's Avatar
    I'd just cut it off with a knife.
    06-26-09 06:09 PM
  5. mandony's Avatar
    easy:
    1) Lift the flipper
    2) At the rotation point there are two flat prongs
    3) Using a plier squeeze the prongs together, and, lift and remove the flipper
    06-26-09 08:32 PM
  6. sdmcwilliams's Avatar
    easy:
    1) Lift the flipper
    2) At the rotation point there are two flat prongs
    3) Using a plier squeeze the prongs together, and, lift and remove the flipper
    I didn't know it was a dolphin!

    The problem with that solution is that there will still be two pieces sticking out of the back.

    Posted from my CrackBerry at wapforums.crackberry.com
    06-26-09 09:24 PM
  7. PwnCakes193's Avatar
    That method works, but I still have the two prongs left, anyway to get these off?
    06-27-09 09:39 AM
  8. Reverand Jim's Avatar
    Thanks I'll look at another case. The prongs left on there are painful.
    06-27-09 02:23 PM
  9. PwnCakes193's Avatar
    Thanks I'll look at another case. The prongs left on there are painful.
    Theyd be pretty easy to take off. Im gonna use pliers, or a knife later on and I'll tell you how it goes
    06-27-09 02:25 PM
  10. bt224's Avatar
    Get an OEM pocket pouch

    Posted from my CrackBerry at wapforums.crackberry.com
    06-27-09 02:33 PM
LINK TO POST COPIED TO CLIPBOARD