09-25-11 07:54 AM
88 123 ...
tools
  1. Bla1ze's Avatar



    We'll have em soon in the Shop CrackBerry Store!
    nfsw and suself like this.
    08-16-11 09:18 PM
  2. Shauneee's Avatar
    Oh my... I would definitely get these.
    08-16-11 09:23 PM
  3. glidewells's Avatar
    Does it add any bulk to the phone?
    08-16-11 09:29 PM
  4. Bla1ze's Avatar
    Does it add any bulk to the phone?
    Very little.. still fits in the OEM holster with it on. It's in there snug but I imagine you could stretch it out a little to make it less tight.
    08-16-11 09:31 PM
  5. Zach7's Avatar
    That's great looking! How is the edge coverage on top and bottom?

    edit: Is Crackberry going to toss in a free sticker with each case?
    08-16-11 09:43 PM
  6. satanberry's Avatar
    Since the bottom is exposed, would it still work with the oem charging pod?
    data77 likes this.
    08-16-11 09:50 PM
  7. Foberry's Avatar
    That does look nice, the casemate "Pop" looks much nicer though.

    Posted from my CrackBerry at wapforums.crackberry.com
    08-16-11 09:50 PM
  8. data77's Avatar
    Since the bottom is exposed, would it still work with the oem charging pod?
    Great question. I would love to know this as well.
    08-16-11 11:45 PM
  9. BBFTW88's Avatar
    Grabbing myself a black one of these
    08-17-11 03:53 AM
  10. Big_Ern's Avatar
    Since the bottom is exposed, would it still work with the oem charging pod?
    Great question. I would love to know this as well.
    x3

    I would like to know as well.
    Specifically for the barely there brushed aluminum cases
    08-17-11 04:11 AM
  11. greggebhardt's Avatar
    If the case extends do the back of the device to the bottom, it will NOT. The device fit snugly in the POD with zero room to spare. It would be nice if they made a version that stopped in the right place.

    From looking at the images the case goes all the way down the back of the device and will not allow the POD to be used.

    A deal breaker for me!
    Last edited by greggebhardt; 08-17-11 at 06:31 AM.
    08-17-11 06:28 AM
  12. satanberry's Avatar
    I can't help but think RIM would sell a lot more accessories if they made sure their own case would fit their own charging pod. I loved the charging pod on my 9000 and my 9650 and would love to get one for my 9900 but because it is so slim and I'm afraid to drop it, I want to use a case. Sigh...
    08-17-11 03:52 PM
  13. rryoung's Avatar
    yea, i love the look of the case, but the barely there cases on my old bold were a little tough to get off so it made using the charging pod difficult. I like the pod too much so i think i am just gonna stick with a silicon case which can slip on and off very easy so i can use the charging pod.
    08-17-11 04:43 PM
  14. crigga84's Avatar
    Mine came today....no phone yet
    Pr3ston27 and funnykindel like this.
    08-17-11 04:49 PM
  15. AbuYazeedUK's Avatar
    ^^^ what's the hole below the flash cut out for?
    08-17-11 05:02 PM
  16. crigga84's Avatar
    ^^^ what's the hole below the flash cut out for?
    Not sure, but it's exactly where the backdoor flap is.
    08-17-11 05:05 PM
  17. AbuYazeedUK's Avatar
    Not sure, but it's exactly where the backdoor flap is.
    No the one at the bottom is for the speaker i'm on about the one just below the camera and flash cut outs there's a 3rd cut out there but can't see anything on the phone unless it's for NFC signal or something?
    08-17-11 05:08 PM
  18. khaltire's Avatar
    Question is, if the phone falls on the base will the metal get scratched? or is it some how protected?
    08-17-11 05:08 PM
  19. crigga84's Avatar
    No the one at the bottom is for the speaker i'm on about the one just below the camera and flash cut outs there's a 3rd cut out there but can't see anything on the phone unless it's for NFC signal or something?


    Could be cos there's nothing else there on the phone.
    08-17-11 05:11 PM
  20. atrpm's Avatar
    how is this compare to the OEM hard case that crackberry currently have in stock?
    08-17-11 05:36 PM
  21. JDMST4R's Avatar
    Here's mine in black. I only put it on when I'm not using the OEM holster.
    08-17-11 06:40 PM
  22. Big_Ern's Avatar
    Great pictures. Thanks

    It looks like it will still work with the charging dock/pod
    (might have to file the pod's opening a touch larger, but it should work since the charge contacts are showing nicely)

    I'm going to order a brushed aluminum cover and give it a try
    08-17-11 06:46 PM
  23. leems's Avatar
    The OEM hardcase is not that bad. Sides have a grip texture, and back of the case is hard plastci with a design and the infamous BB logo. It goes arond the whole silver part around the phone. with cut out for the jack, usb charger, on the left. The buttons on the right hand side are covered with the grip material.
    Pushing the buttons with the case on does not effect their performance.
    atrpm likes this.
    08-17-11 06:52 PM
  24. manofice1's Avatar
    Here's mine in black. I only put it on when I'm not using the OEM holster.
    I think your pictures just sold me on this case
    08-17-11 08:31 PM
  25. manofice1's Avatar
    The OEM hardcase is not that bad. Sides have a grip texture, and back of the case is hard plastci with a design and the infamous BB logo. It goes arond the whole silver part around the phone. with cut out for the jack, usb charger, on the left. The buttons on the right hand side are covered with the grip material.
    Pushing the buttons with the case on does not effect their performance.
    well then, case mate or oem hard shell case?
    08-17-11 08:32 PM
88 123 ...
LINK TO POST COPIED TO CLIPBOARD