12-13-13 11:50 AM
42 12
tools
  1. zocster's Avatar
    What brand router is it? Have you tried your neighbour's router or any public access point?
    11-23-13 12:42 AM
  2. aaron j's Avatar
    its a netcomm and yes I tried a mcdonalds as a test and still the device says limited access point.
    11-23-13 01:00 AM
  3. aaron j's Avatar
    That's an interesting question.... I wonder if a earlier bar will work?!

    I do believe that the changing of the router to a lesser speed is the answer as I've still managed to establish a 100% connection with no drop out.

    What options are there in your wifi router? Is their an "advanced" section?

    Posted via CB10 on my Q10 (Q10SQN100-3/10.2.1.1055)
    to test your theory, which settings should I alter?

    Wifi not working on latest leak?-untitled.jpg
    11-23-13 01:03 AM
  4. zocster's Avatar
    You have rebooted your router?. This Z10STL100-2/10.2.1.1055 has just as good as 10.2.0.1803 if not better? Device still under warranty?
    11-23-13 01:17 AM
  5. southlander's Avatar
    I've done my install with out a restore and I too have thiis problem... well, had.. so iim not sure the recovery is to be fully blammed!

    Posted via CB10 on my Q10 (Q10SQN100-3/10.2.1.1055)
    Do a security wipe. It seems irrational a bit but the .1055 leak is finicky about settings. A security wipe is the only way to make sure the config is absolutely clean to start with.

    Perhaps for some reason it thinks the router is a hotspot, etc. No way to tell. If you back up, wipe, then try it, and if it works ok, just restore only "settings", then in my experience you are go to go.

    As you've said it wouldn't make sense for it not to work as well as before by design, or to be the router if the router was fine before.

    My Z10 with the leak has constant WiFi -- no drops and no issues.
    11-23-13 01:23 AM
  6. aaron j's Avatar
    You have rebooted your router?. This Z10STL100-2/10.2.1.1055 has just as good as 10.2.0.1803 if not better? Device still under warranty?
    Yea rebooted router, no z10 warranty
    Wifi worked great on 10.1 and 10.2.0.xx.

    Posted via CB10
    11-23-13 01:32 AM
  7. southlander's Avatar
    Yea rebooted router, no z10 warranty
    Wifi worked great on 10.1 and 10.2.0.xx.

    Posted via CB10
    There is likely nothing wrong with your phone's hardware. Configuration is probably corrupted.

    I installed the 10.2.1.1055 leak on my wife's Z10 -- her phone has been perfect from day one. But after installing the leak she lost the ability to use BBM due to no connection to the "BlackBerry NOC" (the little 4 dots you see on the top of the screen). I was about to give up after two installs. I then did a security wipe and all of a sudden it worked fine. Which means the config was gummed up somehow.

    Security wipe (make sure you have a full back up first).
    11-23-13 01:42 AM
  8. aaron j's Avatar
    I did a security wipe three hours ago

    Posted via CB10
    11-23-13 01:57 AM
  9. zocster's Avatar
    I did a security wipe three hours ago

    Posted via CB10
    Security wipe then reload same os again?
    11-23-13 02:13 AM
  10. southlander's Avatar
    I did a security wipe three hours ago

    Posted via CB10
    And you did not restore anything at all? You set the Wifi profile up manually to test?

    Posted via CB10
    11-23-13 02:17 AM
  11. Gearheadaddy's Avatar
    My Verizon Z10 works fine on Wireless N...Linksys router EA4500 Refurbished. Purchased direct from Linksys manufacturing. Mine kept losing signal on G router.
    The solution is what I did.

    The problem is down to your router. It would appear that the device can not operate on the wireless N (upto 300Mbps) signal. Try changing to the 54Mbps (Wireless G) signal.

    Since I did, mine stays connected.
    11-23-13 02:53 AM
  12. aaron j's Avatar
    And you did not restore anything at all? You set the Wifi profile up manually to test?

    Posted via CB10
    Na no restores of any kind.

    Posted via CB10
    11-23-13 07:26 AM
  13. Puneet Kohli's Avatar
    Guys I have a different Wifi problem.

    I can't switch the wifi on. If I switch it to on, it says on, but no networks detected, and when i go back to the menu, it shows wifi is off!

    Really sad. Tried hard reset no fix :/
    11-23-13 10:01 AM
  14. LP_Rigg's Avatar
    Most of theses issues have been derermined to be caused bu android sideloads, apk directs or android app store installs. It seems to conflict in some cases where native settings are concerned. Even if you have not reloaded anything android related, archival info still remains in the misc folder.

    You can try backing up your phone and manual backup to computer of the misc folder. Then delete the non standard info in the misc folders, ie app related, and the two runtime files.

    See if that works, then reinstall the runtime of your choice.

    Posted via CB10
    11-23-13 10:47 AM
  15. aaron j's Avatar
    Most of theses issues have been derermined to be caused bu android sideloads, apk directs or android app store installs. It seems to conflict in some cases where native settings are concerned. Even if you have not reloaded anything android related, archival info still remains in the misc folder.

    You can try backing up your phone and manual backup to computer of the misc folder. Then delete the non standard info in the misc folders, ie app related, and the two runtime files.

    See if that works, then reinstall the runtime of your choice.

    Posted via CB10
    Good info, I might try this..

    Posted via CB10
    11-27-13 12:05 AM
  16. Shadowsong's Avatar
    well I security wiped and ran the auto loader again and still no wifi?!?!

    whats my next step guys?

    ps thanks for your patience..
    Security Wipe ought to have been done AFTER loading the new OS (not before - otherwise you're back to square one). It's a pain going thru set up twice but it ensures you have a clean slate and your new leak functions as intended...
    11-30-13 03:29 PM
  17. focusfactor's Avatar
    "Broadband routers use different protocols for wireless networks, most commonly 802.11B, 802.11G and 802.11N. The N protocol is the fastest of the three options with connection speeds of up to 300 Mbps, or megabytes per second."
    Mbps is actually megabits per second, not megabytes. 8 bits in a byte... MBps would be megabytes. Wireless N goes up to 300 megabits per second.
    12-13-13 11:50 AM
42 12

Similar Threads

  1. Netflix doesn't work on 10.2.1.1055
    By althedon in forum BB10 Leaked/Beta OS
    Replies: 27
    Last Post: 11-22-13, 12:35 PM
  2. Instagram not working after updating to 10.2.0.424
    By carleefar in forum BB10 Android App Sideloading
    Replies: 2
    Last Post: 11-20-13, 05:48 PM
  3. Working JW Library apk or bar file?
    By dave_2611 in forum Android Apps (Amazon Store & APK Files)
    Replies: 2
    Last Post: 11-16-13, 08:49 AM
  4. why I can't see blackberry Internet logo on Z10?
    By liuqs1990 in forum General BlackBerry Discussion
    Replies: 16
    Last Post: 11-16-13, 04:37 AM
  5. Quick Q on 10.2.1.1055
    By Gram007 in forum BB10 Leaked/Beta OS
    Replies: 4
    Last Post: 11-16-13, 03:18 AM
LINK TO POST COPIED TO CLIPBOARD