08-29-14 07:10 PM
26 12
tools
  1. llamax's Avatar
    Having many issues loading the 10.3.0.1052 OS using Sachesi 1.2.1 on Win8.1.

    Generally, mucking about with disconnecting and reconnecting the phone and relaunching Sachesi will get through the core OS and radio BAR loads.

    However, only one successful load on a Z30 of the apps BARS, zero successful out of approximately 10 tries on a Z10 using the correct BARs.

    Updated Link to the latest, cannot even launch Sachesi 1.2.3, and still the apps loads stalls at 17%, 31%, 50%, etc.

    What is the fix?
    08-26-14 10:09 PM
  2. llamax's Avatar
    And yes, set the connection method to "connect to windows" from the default auto setting.
    08-26-14 10:11 PM
  3. w_scott's Avatar
    Do you have the latest link installed ?

    Posted via CB10
    08-26-14 11:46 PM
  4. llamax's Avatar
    Yes, absolutely.
    08-27-14 12:30 AM
  5. xsacha's Avatar
    Having many issues loading the 10.3.0.1052 OS using Sachesi 1.2.1 on Win8.1.

    Generally, mucking about with disconnecting and reconnecting the phone and relaunching Sachesi will get through the core OS and radio BAR loads.

    However, only one successful load on a Z30 of the apps BARS, zero successful out of approximately 10 tries on a Z10 using the correct BARs.

    Updated Link to the latest, cannot even launch Sachesi 1.2.3, and still the apps loads stalls at 17%, 31%, 50%, etc.

    What is the fix?
    Please only use Sachesi 1.4.0. I have made sure it works on every device (Windows, Linux, OSX, Android, Blackberry) without fail and it has fixed several bugs relating to extraction and installation.

    If Sachesi 1.4.0 does not work for you for whatever reason, please tell me what happens and I will make sure it is fixed today.
    peednus likes this.
    08-27-14 12:30 AM
  6. llamax's Avatar
    Kept crashing Sachesi upon starting load of BARs. Seems to be installing now.

    Will report back in the morning upon successes.
    08-27-14 12:55 AM
  7. ralphbu's Avatar
    Help! My Blackberry Z3 is not recognized by Sachesi (even 1.4.0) since installing 10.3.0.1052. What I do... I first open Sachesi and click on install or backup. I connect my device via USB and wait for it to scan and identify the device. However, it stays that way all the time - the loading icon just goes round and round. The window install doesn't appear.
    08-27-14 02:12 AM
  8. llamax's Avatar
    Didn't work, Xsasha. Says Sachesi stopped working midway through the load.
    08-27-14 07:35 AM
  9. llamax's Avatar
    Any news, Xsacha? The load stalled again overnight at about 17% on Win8.1. AV, ASW, and firewall were disabled, ran Sachesi 1.4.0 as Admin.

    Any thoughts on what causes the installation of the BARS to stall and stop?

    I'm game to try the load again tonight...
    08-27-14 07:46 PM
  10. nah.uhh's Avatar
    Xsacha, I'm running 1.2.3 on Linux and windows and both seem to work fine

    I can't seem to get 1.4.0 working on either Ubuntu 14.04 or windows 7.

    On Ubuntu the latest qt in the repository is 5.2.1. I tried installing 5.3.1 from qt website but that installs to the home directory and it seems sachesi doesn't recognize it.

    No idea what to do on windows to make it work?

    Sorry op for derailing
    08-27-14 09:02 PM
  11. conite's Avatar
    Version 1.2.1 is the last working version of Sachesi for me on my windows 8.1 laptop. All newer versions can't seem to connect properly and/or crash.

    Z30STA100-5/10.3.0.1xxx
    08-27-14 09:40 PM
  12. llamax's Avatar
    Yeah, I used that for my Z39 and I managed to get it to work after about 10 tries but for the Z10, no luck, always freezes on the app installation, the last step in the overall upgrade.
    08-27-14 09:42 PM
  13. xsacha's Avatar
    Version 1.2.1/1.2.3 may work but they have several issues that will cause problems in 10.3 for extraction/installation that were resolved in 1.4.0. So it's important to make sure you guys are getting 1.4.0 working.

    If you don't have Qt5.3 on Ubuntu, please use the Qt4.8 version: https://github.com/xsacha/Sachesi/re...xQt4.8.tar.bz2

    If you're using the Windows version, make sure you extract *ALL* the files in to the same directory. If you have any further issues, please tell me what happened so I can fix that up. It shouldn't be crashing or not opening.
    I will try to release a standalone .exe for Windows as I know people have less issues when they don't need to extract stuff.
    Last edited by xsacha; 08-27-14 at 10:55 PM.
    08-27-14 10:34 PM
  14. llamax's Avatar
    Hi xsacha, the program loads fine, doesn?t crash. It just hangs during the load of the application BARs.

    The phone actually drops the update screen and the program sits there stalled. This happens after many hours of trying to load files.

    Is loading the app BARS the same end result as using the PB Chrome Extension? At least that way I can see what BARs were loaded so I can restart when it froze, if need be.
    08-27-14 10:47 PM
  15. xsacha's Avatar
    Is loading the app BARS the same end result as using the PB Chrome Extension? At least that way I can see what BARs were loaded so I can restart when it froze, if need be.
    Yes, loading app bars should be the same no matter which method you use.

    I will investigate this issue where communication drops out during an install. Thanks!
    08-27-14 10:53 PM
  16. Cranky's Avatar
    I run 1.2.1 under win 8.1 as administrator. Right click and choose Run as Administrator.

    Posted by a Proud NRA Supporter!
    08-28-14 12:27 AM
  17. conite's Avatar
    As I mentioned before, I cannot get anything higher than version 1.2.1 to work. I have never had any issues other than the docs to go problem with this version and OS 10.3.

    When I try to use ANY later version, here is what happens:

    First off, when you load up the program, then connect the device, it does not say "connected to...". Although there are other indications that it is connected because it will go to the install screen.

    Second, when a bar file is dragged into the install window, the program crashes.

    Z30STA100-5/10.3.0.1xxx
    08-28-14 06:29 AM
  18. llamax's Avatar
    Xsacha, it seems to hang on the android sys BAR.
    08-28-14 07:01 AM
  19. xsacha's Avatar
    Xsacha, it seems to hang on the android sys BAR.
    Is there any information in the logcat?
    08-28-14 04:08 PM
  20. nah.uhh's Avatar
    Version 1.2.1/1.2.3 may work but they have several issues that will cause problems in 10.3 for extraction/installation that were resolved in 1.4.0. So it's important to make sure you guys are getting 1.4.0 working.

    If you don't have Qt5.3 on Ubuntu, please use the Qt4.8 version: https://github.com/xsacha/Sachesi/re...xQt4.8.tar.bz2

    If you're using the Windows version, make sure you extract *ALL* the files in to the same directory. If you have any further issues, please tell me what happened so I can fix that up. It shouldn't be crashing or not opening.
    I will try to release a standalone .exe for Windows as I know people have less issues when they don't need to extract stuff.
    1.4.0 for Linux with qt4.8 working for me on 14.04. Used it to upgrade to 1131. Though I haven't tried loading app bars, buildings an autoloader, backup/restore or 1.4.0 for Windows yet.
    08-28-14 04:14 PM
  21. internetzorro's Avatar
    I have the same issue, using 1.4.0 (downloaded yesterday), crashes after loading .bar. A second problem is that that it will not let me extract from .signed file. Says the file is not signed by Blackberry, even though I downloaded the file from Blackberry and split it in Sachesi 1.4.0. running on Windows 8.1 64-bit.
    Last edited by internetzorro; 08-28-14 at 08:26 PM.
    08-28-14 07:09 PM
  22. internetzorro's Avatar
    OK after reloading Sachesi and taking a closer look, it appears that when I attempt to split, it hangs on the extraction of the .signed file, creating a useless file header without extracting any of the stuff.

    I plug in my Q10 and the phone is recognized, but neither the backup nor the install functions work without either crashing or hanging.
    08-28-14 08:25 PM
  23. xsacha's Avatar
    Which firmware are you splitting? I'll try to reproduce here.

    Thanks for your report!
    08-29-14 12:43 AM
  24. Paul Ogorzow's Avatar
    Turning of antivirus software did the trick at me end.

    *Posted via CB10*
    08-29-14 03:48 AM
  25. Gearheadaddy's Avatar
    Having many issues loading the 10.3.0.1052 OS using Sachesi 1.2.1 on Win8.1.

    Generally, mucking about with disconnecting and reconnecting the phone and relaunching Sachesi will get through the core OS and radio BAR loads.

    However, only one successful load on a Z30 of the apps BARS, zero successful out of approximately 10 tries on a Z10 using the correct BARs.

    Updated Link to the latest, cannot even launch Sachesi 1.2.3, and still the apps loads stalls at 17%, 31%, 50%, etc.

    What is the fix?
    Use Sachesi 1.4.0...

    CrackBerry Genius on Verizon 10.3.0.1052
    08-29-14 06:41 PM
26 12

Similar Threads

  1. AT&T Official OS 10.2.1.3337 (SR 10.2.1.3014)
    By danielangulo_co in forum BlackBerry 10 OS
    Replies: 75
    Last Post: 10-24-14, 05:04 PM
  2. 10.3 Must Have
    By dar1030 in forum BlackBerry 10 OS
    Replies: 2
    Last Post: 08-27-14, 07:06 AM
  3. AT&T 10.2.1.3014 OS update
    By Armagedona in forum BlackBerry 10 OS
    Replies: 1
    Last Post: 08-27-14, 12:21 AM
  4. BBM group Calendar does appear in Calendar App
    By Easypants in forum BlackBerry 10 OS
    Replies: 4
    Last Post: 08-26-14, 10:26 PM
  5. Should I go for 10.3.1052
    By SaurabhIb in forum BlackBerry 10 OS
    Replies: 4
    Last Post: 08-26-14, 09:45 PM
LINK TO POST COPIED TO CLIPBOARD