1. marioingham's Avatar
    SO I downloaded the 10.2.0.1047 update for my STL100-1 from here; http://forums.crackberry.com/bb10-le...evices-835026/

    Ran it and everything worked fine. The only complaint i have (a pretty big one) is that my radio doesnt seem to be working properly afterwards. Whenever I restart my phone, it says "searching for network" or "emergency calls only". I have to switch the mobile network off and on a few times before it finally connects to my network.

    When it does connect, my phone says 3G instead of 4G. Everything works - calls, texts, data, but its stuck at 3g speeds, when I had 4g before the update. This has been my first leak installed so just wondering - did I miss something? I think the radio is screwed up. Network mode keeps switching to 3G only, even after I keep selecting 3G & 4G

    I love 10.2 and donw want to downgrade, but having to wait 15mins after restarting my phone for it to connect to my network is annoying. Also, no more 4G!

    Please help me out guys....
    Attached Thumbnails Upgraded to 10.2.0.1047 on STL100-1 - NETWORK PROBLEMS SINCE!-img_00000005.jpg   Upgraded to 10.2.0.1047 on STL100-1 - NETWORK PROBLEMS SINCE!-img_00000006.jpg   Upgraded to 10.2.0.1047 on STL100-1 - NETWORK PROBLEMS SINCE!-img_00000007.jpg  
    09-01-13 12:15 PM
  2. trinichindian's Avatar
    Did you do a security wipe after installing.? You could also try reloading the radio only for 1047 . I think Wu wei has one on his b@stards thread.

    >Zedding since the beginning
    09-01-13 12:49 PM
  3. xtremez's Avatar
    If you are using STL100-1, there isn't any LTE available..

    Posted via CB10 from my Z10
    09-01-13 01:01 PM
  4. trinichindian's Avatar
    If you are using STL100-1, there isn't any LTE available..

    Posted via CB10 from my Z10
    I don't believe the OP is trying to get an LTE signal, but it accustomed to see 4G for the signal. I have an STL100-1 and have 4G shown next to my signal atrength

    >Zedding since the beginning<
    09-01-13 01:14 PM
  5. marioingham's Avatar
    I don't believe the OP is trying to get an LTE signal, but it accustomed to see 4G for the signal. I have an STL100-1 and have 4G shown next to my signal atrength

    >Zedding since the beginning<

    Correct, I know my phone isnt 4G LTE capable, but it is 4G capable, and this was shown next to my signal strangth before I did the update. Can anyone post a link to where I can find the 1074 radio only for the STL100-1 with autoloader (I really not tech savvy - this is my first time doing all of this).

    ALso any idea why it takes about 15 mins after a restart to connect to my network?
    09-01-13 01:42 PM
  6. stitch69's Avatar
    In your first screen shot, the network is identified as ISLANDCOM 3G, guess that's why u see 3G next to the signal strength and not 4G.

    Posted via CB10
    09-01-13 01:45 PM
  7. marioingham's Avatar
    Yes, thats because where I am, Islandcom is a 3G and 4G network (not 4g LTE). 4G is offered to customers with a 4g capable device, or else they will have 3g.

    Please note - I've always had 4G displayed on my device. Only after running the update to 10.2 has it now been saying 3G.
    09-01-13 01:56 PM
  8. toobs623's Avatar
    Yes, thats because where I am, Islandcom is a 3G and 4G network (not 4g LTE). 4G is offered to customers with a 4g capable device, or else they will have 3g.

    Please note - I've always had 4G displayed on my device. Only after running the update to 10.2 has it now been saying 3G.
    It's just the way it is displayed. Either way if your carrier provides it you should be getting hspa speeds regardless of 3G or 4G being displayed.

    Posted via CB10
    09-01-13 02:36 PM
  9. marioingham's Avatar
    Thanks for the feedback.

    Any idea why it takes so long to connect upon startup? I have to toggle airplane mode of and on a few times before it finds and connects to my cellular network
    09-01-13 02:42 PM
  10. trinichindian's Avatar
    You have the 1048 radio right?

    https://mega.co.nz/#!3wICmIBZ!JjjwTm...nuZvRJu2slxLVc

    Here is the radio only, just in case u wanna try it

    >Zedding since the beginning<
    lwlm586 likes this.
    09-01-13 02:50 PM
  11. manuerduarte's Avatar
    I have te same problem.. signal always drop.. the fix for now and for me were manually search the network

    Posted via CB10
    09-01-13 06:53 PM
  12. lwlm586's Avatar
    hey guys, i had the same problem as described in the OP, after flashing the radio file posted by trinichindian, the phone connected itself to the network, thank you buddy!
    trinichindian likes this.
    09-01-13 10:33 PM
  13. yohanes joko's Avatar
    restart your device im using 10.2.0.1047 too
    09-01-13 10:53 PM
  14. trinichindian's Avatar
    hey guys, i had the same problem as described in the OP, after flashing the radio file posted by trinichindian, the phone connected itself to the network, thank you buddy!
    No problemo

    >Zedding since the beginning<
    09-01-13 10:58 PM
  15. stitch69's Avatar
    Also, you can set the network mode to 4G/3G&2G in case you move out of 4G/3G coverage area, you'll still have EDGE reception.
    09-03-13 09:39 AM
  16. marioingham's Avatar
    OK guys, now Im able to connect to my network, but I cant get any data services because I cannot set my APN! All the field are blank - it allows me to type in my apn, but when I press save, and go back into it, its blank! It's not saving for some reason. I even tried going to the Escreen and typing the APN in there, but no luck!

    Help - I need to be able to use my data and have my APN set.
    09-07-13 11:58 AM
  17. blackberriquero's Avatar
    No problemo

    >Zedding since the beginning<
    How do you install a radio file? please!
    10-06-13 08:33 PM
  18. Uzi's Avatar
    How do you install a radio file? please!
    Download sachei, download radio file you want
    Open sachei prees combine select radio file you want and it will become autoloader connect your bb to pc and run the autoloader

    Pin:2AF5A1B8 Q10SQN100-3/10.2.1.476
    blackberriquero likes this.
    10-06-13 11:03 PM

Similar Threads

  1. Since latest telus update...
    By BBjer in forum Telus Canada
    Replies: 18
    Last Post: 10-01-13, 10:39 AM
  2. The Answer to BB's problems... but only if...
    By lorax1284 in forum BlackBerry 10 OS
    Replies: 7
    Last Post: 09-04-13, 04:47 AM
  3. Is it possible to put apps on my SD in BB10?
    By DS1331 in forum BlackBerry Q10
    Replies: 9
    Last Post: 09-02-13, 12:29 AM
  4. Cascades Method to Close/Exit/Terminate Third-Party App?
    By stardomains in forum BB 10 Developers Hangout
    Replies: 6
    Last Post: 09-01-13, 08:36 PM
  5. When the 10.2 will be launched officially?
    By trkgharib in forum BlackBerry 10 OS
    Replies: 3
    Last Post: 09-01-13, 11:59 AM
LINK TO POST COPIED TO CLIPBOARD