1. Jeno Marton's Avatar
    I have downloaded and extracted from Mega the 10.3 autoloader.
    Tried to use Sachesi 1.1.3 to split it up, so I could do a non-destructive side load.
    However, Sachesi splitting process got stucked on 0 % , and in about 10 minutes I have not seen any progress?
    Anybody managed to split this file ?
    04-05-14 11:59 AM
  2. clie610's Avatar
    I have downloaded and extracted from Mega the 10.3 autoloader.
    Tried to use Sachesi 1.1.3 to split it up, so I could do a non-destructive side load.
    However, Sachesi splitting process got stucked on 0 % , and in about 10 minutes I have not seen any progress?
    Anybody managed to split this file ?
    I think you need to use version 1.1.7 or latest one 1.2.1 to split the autoloader because of the file size, it's there in the first page of sachesi's sticky thread
    Jewelswitz Iam likes this.
    04-05-14 12:03 PM
  3. thurask's Avatar
    Even if you could get it to split the autoloader (Sachesi 1.1.3 doesn't work with very large OS files, like 10.3.0.140), you can't load it non-destructively. That would require publicly-available bar files on BlackBerry servers.
    clie610 likes this.
    04-05-14 12:04 PM
  4. Jeno Marton's Avatar
    thanks for the info
    dl-ed sachesi 1.2.1 and splitting done in about 2-3 minutes
    on the signed file I did extract apps and it worked fine
    however, I do not see the usual "factory" bar in the apps, which is usually the largest file
    have sys.data.nuance_ve_data 226 MB as the largest
    what is that huge file good for ? android runtime ?
    Last edited by Jeno Marton; 04-05-14 at 12:53 PM.
    04-05-14 12:23 PM
  5. clie610's Avatar
    Even if you could get it to split the autoloader (Sachesi 1.1.3 doesn't work with very large OS files, like 10.3.0.140), you can't load it non-destructively. That would require publicly-available bar files on BlackBerry servers.
    Thanks Thurask, I didn't know this since I always do destructive load. to OP I think you should see Thurask's comment on this.
    04-05-14 12:46 PM
  6. Gearheadaddy's Avatar
    Would Darcy's Tools work to split?

    Trusted Member Genius
    04-06-14 02:00 AM
  7. redchilli88's Avatar
    Would Darcy's Tools work to split?

    Trusted Member Genius
    Yes:- #1

    http://forums.crackberry.com/bb10-le...64/index6.html
    04-06-14 04:17 AM
  8. rhon3g's Avatar
    I have downloaded and extracted from Mega the 10.3 autoloader.
    Tried to use Sachesi 1.1.3 to split it up, so I could do a non-destructive side load.
    However, Sachesi splitting process got stucked on 0 % , and in about 10 minutes I have not seen any progress?
    Anybody managed to split this file ?
    You will only get app bars but not the radio and core OS bar.

    Posted via CB10
    04-06-14 01:30 PM
  9. Jeno Marton's Avatar
    yep, latest Sachesi worked, made 2 signed files, radio and apps
    continued to extract apps.signed and it created an app folder with the apps.bar files
    however, there is no core OS bar (factory ?/winchester ?)
    so this is dead end
    04-06-14 05:40 PM
  10. Jewelswitz Iam's Avatar
    Hello, please can I use sachesi to pull d new os 10.3 for Q10? If yes, how? Thanks.
    05-22-14 06:28 PM
  11. Jewelswitz Iam's Avatar
    Pls is it possible for me to use sachesi to pull os 10.3 for Q10? If yes, how?
    05-22-14 06:31 PM
  12. thurask's Avatar
    Pls is it possible for me to use sachesi to pull os 10.3 for Q10? If yes, how?
    You can't.

    Posted via CB10
    05-22-14 06:43 PM
  13. shashiraz's Avatar
    I'm Using Sachesi 1.3.1 stuck with 0% from an hour.
    08-25-14 01:42 PM
  14. xsacha's Avatar
    I'm Using Sachesi 1.3.1 stuck with 0% from an hour.
    Can you please try v1.4.0?
    https://github.com/xsacha/Sachesi/re...dows-MingW.zip
    08-25-14 02:51 PM
  15. arthursim's Avatar
    I tried too, but the mingw version doesn't even run for me. I get the following:

    Gyazo - 8569e36acad7565618dbbdc9e4f3944e.png
    08-25-14 08:54 PM
  16. shashiraz's Avatar
    Tried that didn't work for me...Had To downgrade to 1.2.1 or something...Then it was done in like few minutes... But thanks for your efforts.. Sachesi does wonders for most us who love it the non destructive way...

    RoCking wid The Z10! STL 100-1! OS 10.3!
    08-25-14 09:42 PM
  17. xsacha's Avatar
    I tried too, but the mingw version doesn't even run for me. I get the following:
    Thanks. That was actually extremely helpful! Will have a fix tonight.
    08-25-14 11:41 PM
  18. rdijkmans's Avatar
    I couldn't split with Sachesi either, so just renamed the .bar to .zip, to extract the .signed file using windows explorer. After that "Extract Apps" worked fine with Sachesi. You'll need to download the core and radio .bar (post #5 in the "10.3.0.1052 for all devices" thread - can't post links yet) to complete the non-destructive pack. Worked brilliant for me!

    Posted via CB10
    Last edited by rdijkmans; 08-26-14 at 05:55 AM.
    Nicholas C likes this.
    08-26-14 12:55 AM
  19. xsacha's Avatar
    So the Sachesi Windows should be fixed now. Thanks for that screenshot.
    https://github.com/xsacha/Sachesi/re...dows-Fixed.zip

    1.4.0 fixed several bugs including what I think rdijkmans described.
    m1kr0 likes this.
    08-26-14 07:39 AM

Similar Threads

  1. Watching Movies with OTG USB
    By rangus in forum BlackBerry Z30
    Replies: 16
    Last Post: 04-16-14, 08:57 PM
  2. Using the Bold 3 with the Z10
    By Bhupendra Warade in forum General BlackBerry Discussion
    Replies: 21
    Last Post: 04-12-14, 06:40 PM
  3. Wechat - No Notifications - BB 10.2.1.2234
    By jdcbomb in forum BlackBerry Q10
    Replies: 5
    Last Post: 04-06-14, 10:51 PM
  4. Android apps on BlackBerry 10 - Why the negativity?
    By CrackBerry News in forum CrackBerry.com News Discussion
    Replies: 1
    Last Post: 04-05-14, 11:06 AM
  5. Q10 10.2.1.2102 no BBM Channels
    By naviwilliams in forum BlackBerry Q10
    Replies: 1
    Last Post: 04-05-14, 10:34 AM
LINK TO POST COPIED TO CLIPBOARD