11-05-18 06:24 PM
3,576 ... 7778798081 ...
tools
  1. Bor Navas's Avatar
    I'm having an issue with Sachesi that didn't happen before. I'm trying to update to s non destructive 10.2.1.2941 for my Z30 (234/15/sta100-2). Finds it, but when I click download it does nothing.. if I click like crazy I can see briefly the download message, but it quickly vanishes...

    BB10 news - join my channel C000F331C
    05-31-14 06:42 PM
  2. xsacha's Avatar
    If the antivirus is scanning every file that gets transferred to the phone, it will interrupt the installation process.

    Posted via CB10
    Any antivirus that scans outgoing packet data over usb is plain coded badly. Outgoing data is not a threat. Neither is Usb.
    06-01-14 07:35 AM
  3. Udayan K's Avatar
    I got a problem while installing the firmware...it gave an error something like "Error 500 bad C32" while "sending" the pictureeditor. I am sorry I don't remember the exact error. It seemed to occur because of some file in the /frames folder. The progress bar wouldn't move for almost 45 mins. What do I do now? My phone seems to be working fine as of now. Should I restore from the backup and try again or is there something else that I can do?

    Another problem I faced was Sachesi kept asking for my password after I entered it saying it was "invalid". There was no way I was going wrong. So I just disabled the password and it seemed to work.

    If it helps, I downloaded the update from Vodafone, UK. I have the Z10 STL100-2. I am on Vodafone, India and it doesn't support STL100-2 hence the use of Sachesi. Should I try and get the update from somewhere else?

    Please help!
    06-01-14 06:14 PM
  4. John Clark's Avatar
    I'd just download the files again and try the update again.
    06-01-14 06:38 PM
  5. jhanks64's Avatar
    Use the Grab Links button and find the one that failed. Copy that link to the clipboard and paste into your browser. Save the file in the same folder as the others, then try the update again. It is faster than redownloading all of them.
    06-02-14 01:32 AM
  6. xsacha's Avatar
    If you delete the corrupted file and then use 'Download All' in Sachesi again, Sachesi is smart enough to skip the already completed downloads. It will only download the new files.
    SaraVibes likes this.
    06-02-14 10:38 AM
  7. xsacha's Avatar
    Latest version is available here: https://github.com/xsacha/Sachesi/releases

    Tell me if you notice anything different.
    Uzi and tryfe like this.
    06-02-14 11:52 AM
  8. tdyhedge's Avatar
    Latest version is available here: https://github.com/xsacha/Sachesi/releases

    Tell me if you notice anything different.
    It crashes as soon as I plug in my device. Previous version 1.2.1 still works perfectly. I'm on Windows 7 32-bit. I've not tried my 64-bit machine.

    Via my simply amazing ? Q10 10.2.1.3175
    06-02-14 12:48 PM
  9. ralfyguy's Avatar
    New release poofs away when searching for OS releases. Win7 Ultimate 64bit, even when running as admin.
    Old 1.2.1 working fine.
    06-02-14 01:11 PM
  10. xsacha's Avatar
    New release poofs away when searching for OS releases. Win7 Ultimate 64bit, even when running as admin.
    Old 1.2.1 working fine.
    Interesting... so, crashing. I wonder what is causing this :\ One from device plug in, one from search?

    My test Windows install is Windows 8.1 btw. Compiled with VS2010.
    06-02-14 02:10 PM
  11. tdyhedge's Avatar
    Interesting... so, crashing. I wonder what is causing this :\ One from device plug in, one from search?

    My test Windows install is Windows 8.1 btw. Compiled with VS2010.
    I might add it failed to launch no matter if logged in as normal user or admin, if my device were already plugged in via USB.

    Via my simply amazing ? Q10 10.2.1.3175
    06-02-14 02:25 PM
  12. thurask's Avatar
    A few things (Windows 8.1 x64):
    • Crashes on start if my Z30 is plugged in
    • Z3 OS lookup is bugged (gives 2947 on every carrier)
    • Autoscan doesn't crash (might be a W7 thing)
    • Automatic MCC/MNC switchover for certain devices (STL100-4/SQN100-2/SQN100-4/etc.) doesn't work
    06-02-14 03:09 PM
  13. Udayan K's Avatar
    If you delete the corrupted file and then use 'Download All' in Sachesi again, Sachesi is smart enough to skip the already completed downloads. It will only download the new files.
    I ended up downloading again but this time from Optus, Australia. And I got the same error error at the exact same .bar file - the "pictureeditor". Is there something wrong with my device? What do I do now? I could do a clean install. Where would I find an official install?
    06-02-14 11:14 PM
  14. John Clark's Avatar
    Try removing that bar file from the folder and put it another location. Then try the install again. You can load just that particular bar later.
    06-02-14 11:31 PM
  15. Udayan K's Avatar
    Try removing that bar file from the folder and put it another location. Then try the install again. You can load just that particular bar later.
    Got it! Did just that! Thanks! The device is rebooting now after a successful update. Now where can I get that particular BAR from???

    Thanks so much again!
    06-03-14 12:45 AM
  16. Udayan K's Avatar
    xsacha, thanks a lot! Sachesi is brilliant! It's the first time I used it, been using autoloaders all this while. Thanks for all your effort and help! Thanks to everyone else too!
    06-03-14 12:47 AM
  17. eywong's Avatar
    Latest version is available here: https://github.com/xsacha/Sachesi/releases
    Tell me if you notice anything different.
    Version 1.2.2 (on my WinXP 32-bit) crashes shortly after I plug my Z10 to my laptop's USB. Version 1.2.1 works well. Using it, I downloaded SR 10.2.1.2941 from Rogers Canada (MCC/MNC 302/720) and then I installed the .bar files on my Z10.
    Z10STL100-3/10.2.1.3175
    06-03-14 01:29 AM
  18. jhanks64's Avatar
    If you delete the corrupted file and then use 'Download All' in Sachesi again, Sachesi is smart enough to skip the already completed downloads. It will only download the new files.
    Thanks for that info.
    06-03-14 02:13 AM
  19. petertinh's Avatar
    Cant run with Win 7. Any fixed?
    06-03-14 11:38 AM
  20. xsacha's Avatar
    A few things (Windows 8.1 x64):
    • Crashes on start if my Z30 is plugged in
    • Z3 OS lookup is bugged (gives 2947 on every carrier)
    • Autoscan doesn't crash (might be a W7 thing)
    • Automatic MCC/MNC switchover for certain devices (STL100-4/SQN100-2/SQN100-4/etc.) doesn't work
    1. Fixed crash
    2. I'm seeing these as valid results. Are you sure it isn't reporting 2947 on every carrier?
    3. That's a good thing
    4. Fixed
    Last edited by xsacha; 06-03-14 at 11:18 PM.
    06-03-14 11:01 PM
  21. thurask's Avatar
    I'm seeing these as valid results. Are you sure it isn't reporting 2947 on every carrier?
    Even a gibberish MCC and/or MNC gives 2947 for STJ100-1 over here.

    Posted via CB10
    06-03-14 11:04 PM
  22. xsacha's Avatar
    Version 1.2.3 released

    Even a gibberish MCC and/or MNC gives 2947 for STJ100-1 over here.
    This has happened before with some variants (even manually entering the request) including Z10. I think it's a server problem.
    Does this not happen on earlier Sachesi's for STJ100-1?
    The request and reply are looking legit here.
    eywong and tryfe like this.
    06-04-14 12:26 AM
  23. thurask's Avatar
    Version 1.2.3 released

    This has happened before with some variants (even manually entering the request) including Z10. I think it's a server problem.
    Does this not happen on earlier Sachesi's for STJ100-1?
    The request and reply are looking legit here.
    Yeah, appears to be something wrong on BB's end (even DBBTool shares this behavior). Everything else I had is fixed, so thanks for the update.
    06-04-14 12:45 AM
  24. cehache75's Avatar
    Good news! this last version operates with Vista 32 bits and my Z10 (if you remember precedent versions didn't recognize my device during monthes and monthes!)
    06-04-14 08:44 AM
  25. thurask's Avatar
    Anyone else get a crash on 1.2.3/Windows if you just open Sachesi and leave it there for a minute or so?

    Posted via CB10
    06-04-14 11:56 AM
3,576 ... 7778798081 ...

Similar Threads

  1. Replies: 41
    Last Post: 01-09-16, 12:03 PM
  2. Q10 shows "4G" and Z10 shows "4GLTE"
    By BGQ10 in forum BlackBerry Q10
    Replies: 22
    Last Post: 01-20-14, 11:31 AM
  3. BlackBerry needs to get BB10 in cars, and fast!
    By BlackBerry_Pwner in forum General BlackBerry Discussion
    Replies: 19
    Last Post: 09-17-13, 10:26 AM
  4. Suggestion: BBM Forum for x-platform BBM software and features
    By lorax1284 in forum Site Feedback & Help
    Replies: 2
    Last Post: 07-05-13, 07:01 PM
  5. July 9th Blackberry Webcast What do you expect and What do you want to hear?
    By Wilsonia Goldens in forum General BlackBerry Discussion
    Replies: 4
    Last Post: 07-04-13, 09:38 AM
LINK TO POST COPIED TO CLIPBOARD