12-07-17 03:10 AM
330 123 ...
tools
  1. thurask's Avatar
    If you have the latest Sachesi (which you should; if you don't have it, go get it, this thread'll still be here), you can pick the newest bolded thing down there and change the Download For drop-down to your device (if it isn't what's listed). Sachesi is smart enough to make the necessary changes to replace the device you searched with the device you want. That makes most of this graph redundant, but whatever.

    If you have a STL100-1, pick the bolded STL100-1 set (or Z10 OMAP if Sachesi is new enough).
    If you have a STL100-2/3/4 (aka Z10 QCOM) or any P9982, pick whichever one of those is bolded.
    If you have any Q10, Q5 or P9983, pick whichever one of those is bolded.
    If you have any Z30, Classic or Leap, pick whichever one of those is bolded.
    If you have a Z3, pick the bolded Z3 set.
    If you have a Passport, pick the bolded Passport set.

    If you see two or more bolded values in one set, it's one carrier being irritating and using a different branch, producing a higher version number but older code. Or, BlackBerry getting the right idea and pushing the latest OS to (almost) everyone.

    The underlined OS is the newest OS that's out there.

    If you want to mix and match (ex. 10.2.1.2947 OS and 10.2.1.2229 radio), then make sure to delete the incorrect radio file according to Radio Type and replace it with the right one for your device. STL100-1 OSs go with the STL100-1, other Z10/Z30/Q10/Q5/P9982/P9983/Classic/Leap OSs go with each other, Z3 OSs go with the Z3 (as of 10.3.1) and Passport OSs go with the Passport.

    Device Type Country Carrier Software OS Radio Radio Type
    Z10 STL100-1 404 001 10.3.2.2836 10.3.2.2876 10.3.2.2877 m5730
    Z10 STL100-2 222 088 10.3.2.2836 10.3.2.2876 10.3.2.2877 qc8960
    Z10 STL100-3 302 220 10.3.2.2474 10.3.2.2639 10.3.2.2640 qc8960
    Z10 STL100-4 311 480 10.3.2.556 10.3.2.858 10.3.2.859 qc8960.omadm
    P'9982 STK100-1 510 010 10.3.2.2836 10.3.2.2876 10.3.2.2877 qc8960
    P'9982 STK100-2 N/A N/A N/A N/A N/A qc8960
    Q10 SQN100-1 302 220 10.3.2.2474 10.3.2.2639 10.3.2.2640 qc8960.wtr
    Q10 SQN100-2 311 480 10.3.2.556 10.3.2.858 10.3.2.859 qc8960.wtr
    Q10 SQN100-3 222 010 10.3.3.1463 10.3.3.2205 10.3.3.2206 qc8960.wtr
    Q10 SQN100-4 310 120 10.3.2.2530 10.3.2.2813 10.3.2.2814 qc8960.wtr
    Q10 SQN100-5 302 490 10.3.2.2474 10.3.2.2639 10.3.2.2640 qc8960.wtr
    Q5 SQR100-1 302 220 10.3.2.2474 10.3.2.2639 10.3.2.2640 qc8960.wtr
    Q5 SQR100-2 222 088 10.3.2.2836 10.3.2.2876 10.3.2.2877 qc8960.wtr
    Q5 SQR100-3 510 010 10.3.2.2836 10.3.2.2876 10.3.2.2877 qc8960.wtr
    P'9983 SQK100-1 510 010 10.3.2.2836 10.3.2.2876 10.3.2.2877 qc8960.wtr
    P'9983 SQK100-2 N/A N/A N/A N/A N/A qc8960.wtr
    Z30 STA100-1 310 150 N/A N/A N/A qc8960.wtr5
    Z30 STA100-2 234 015 10.3.2.2836 10.3.2.2876 10.3.2.2877 qc8960.wtr5
    Z30 STA100-3 311 480 10.3.2.556 10.3.2.858 10.3.2.859 qc8960.wtr5
    Z30 STA100-4 310 120 N/A N/A N/A qc8960.wtr5
    Z30 STA100-5 302 220 10.3.2.2474 10.3.2.2639 10.3.2.2640 qc8960.wtr5
    Z30 STA100-6 655 001 10.3.2.2836 10.3.2.2876 10.3.2.2877 qc8960.wtr5
    Classic SQC100-1 222 088 10.3.2.2836 10.3.2.2876 10.3.2.2877 qc8960.wtr5
    Classic SQC100-2 310 150 10.3.2.556 10.3.2.858 10.3.2.859 qc8960.wtr5
    Classic SQC100-3 311 480 10.3.2.556 10.3.2.858 10.3.2.859 qc8960.wtr5
    Classic SQC100-4 310 160 10.3.3.1463 10.3.3.2205 10.3.3.2206 qc8960.wtr5
    Classic SQC100-5 311 480 10.3.2.556 10.3.2.858 10.3.2.859 qc8960.wtr5
    Leap STR100-1 222 088 10.3.2.2836 10.3.2.2876 10.3.2.2877 qc8960.wtr5
    Leap STR100-2 302 220 10.3.2.2474 10.3.2.2639 10.3.2.2640 qc8960.wtr5
    Z3 STJ100-1 404 001 10.3.2.2474 10.3.2.2639 10.3.2.2640 qc8930.wtr5
    Z3 STJ100-2 730 001 10.3.1.1779 10.3.1.2576 10.3.1.2577 qc8930.wtr5
    Passport SQW100-1 302 610 10.3.3.1463 10.3.3.2205 10.3.3.2206 qc8974.wtr2
    Passport SQW100-2 311 480 N/A N/A N/A qc8974.wtr2
    Passport SQW100-3 310 150 10.3.2.556 10.3.2.858 10.3.2.859 qc8974.wtr2
    Passport SQW100-4 N/A N/A N/A N/A N/A qc8974.wtr2

    If you see a newer OS for a device than what you see here, feel free to let me know so I can update the chart.
    Last edited by thurask; 01-25-17 at 10:16 AM.
    03-30-14 02:00 PM
  2. Elite1's Avatar
    Thanks Thurask, amazing work and very appreciated!

    This is now a Sticky Thread in the BB10 Leaked/Beta OS Forum.
    thurask, go1ndr, diegonei and 6 others like this.
    04-02-14 05:50 PM
  3. BigBadWulf's Avatar
    And one I know will be heavily utilized!
    thurask, Elite1 and bunky1971 like this.
    04-02-14 05:58 PM
  4. jhanks64's Avatar
    What the F do I have to do so that I can print this to PDF??!! I've tried FireFox, Internet Explorer and Chrome
    Sachesi Codes for OS downloads-sachesi-codes-no-print.jpg
    04-04-14 02:49 AM
  5. redchilli88's Avatar
    04-04-14 06:01 AM
  6. jhanks64's Avatar
    Done with Firefox.
    What are you doing to only get the message and not the ad overlapping? All three browsers did similar things or didn't show the table at all.
    04-05-14 07:12 AM
  7. soyMisael's Avatar
    Thank you soo much! Useful.

    Posted via TheBATBerry Q10
    04-05-14 07:14 AM
  8. redchilli88's Avatar
    04-05-14 08:18 AM
  9. jhanks64's Avatar
    Looks great, but not updated for Firefox 28.

    Thanks
    04-06-14 01:59 AM
  10. redchilli88's Avatar
    I have 1.02 installed and it works on both FF 28 and 31.0a1.

    You need to point your mouse at the border of an ad, right click, Remove this object and repeat the process like you're peeling off an onion.

    Proof is in the attachment posted previously.
    04-06-14 03:38 AM
  11. thurask's Avatar
    Turns out the build date for 10.2.1.2234 is two weeks after 10.2.1.2758, due to Sprint wanting the Z3 branch for some reason.

    Chart updated for this contingency.
    Superfly_FR likes this.
    04-07-14 12:36 PM
  12. akhenatongup's Avatar
    Been looking all over for the combination for Q10 and .2947, could you help Thurask?
    05-06-14 05:34 AM
  13. zocster's Avatar
    Been looking all over for the combination for Q10 and .2947, could you help Thurask?
    Q10SQN100-3/10.2.1.3175 is out, why bother with old?

    Sent from pin:2AD743B7 via Tapatalk
    05-06-14 05:40 AM
  14. akhenatongup's Avatar
    hi, would prefer to install .2947, as well using the non-destructive option.
    05-06-14 05:46 AM
  15. mhhH4RI's Avatar
    hi, would prefer to install .2947, as well using the non-destructive option.
    You may download with Sachesi Tools with configuration :
    Country : 510 (Indonesia)
    Carrier : 001 (Indosat)
    Device : Z3
    Variant : STJ-100

    Just click "Download All" and don't forget to remove the radio bar. You may try other 10.2.1 radio for Q10.
    05-06-14 06:08 AM
  16. mhhH4RI's Avatar
    Thurask, just noticed that for Device Z3 (on bottom row) the carrier should be 001 (Indosat) instead of 010 (Telkomsel) which is not available yet.
    05-06-14 06:11 AM
  17. thurask's Avatar
    Thurask, just noticed that for Device Z3 (on bottom row) the carrier should be 001 (Indosat) instead of 010 (Telkomsel) which is not available yet.
    Noted.
    mhhH4RI likes this.
    05-06-14 12:33 PM
  18. slagman5's Avatar
    I have a question, I have a Q10 SQN100-1. Using that table, I find basically the exact version I just got from AT&T. Problem is, my phone has been very unstable after loading that. When I was using the 10.2.1.1924 leak, my phone was great. I was wondering if there is another version that would work on my phone that isn't the same one I have? I want to do a non-destructive install instead of a clean install like a regular leak this time just for time constraints...

    Edit: Or if there is a way to install/reinstall just the bar files that controls the ambient light sensor and proximity sensor, that would be nice, those things are not working at all now that I updated. And I've noticed some more lagging than normal every once in a while since updating from the 1924 leak to the official AT&T 10.2.1...
    05-19-14 04:43 AM
  19. AlwaysActions's Avatar
    Thanks Thurask
    05-19-14 05:42 AM
  20. sbmd's Avatar
    I have a question, I have a Q10 SQN100-1. Using that table, I find basically the exact version I just got from AT&T. Problem is, my phone has been very unstable after loading that. When I was using the 10.2.1.1924 leak, my phone was great. I was wondering if there is another version that would work on my phone that isn't the same one I have? I want to do a non-destructive install instead of a clean install like a regular leak this time just for time constraints...

    Edit: Or if there is a way to install/reinstall just the bar files that controls the ambient light sensor and proximity sensor, that would be nice, those things are not working at all now that I updated. And I've noticed some more lagging than normal every once in a while since updating from the 1924 leak to the official AT&T 10.2.1...
    I would recommend backing up your device and using an autoloader to reinstall the latest OS. Then if you 'need' to you can restore your backup, but I recommend starting fresh and setting up your accounts again from scratch you will have a much better experience.
    05-19-14 06:21 PM
  21. slagman5's Avatar
    I would recommend backing up your device and using an autoloader to reinstall the latest OS. Then if you 'need' to you can restore your backup, but I recommend starting fresh and setting up your accounts again from scratch you will have a much better experience.
    Yah, problem with that is I lose all of the saved info from android games and apps, lol. If I copy and paste the android directory in the memory, would that keep all of that?

    Posted without the aid of AutoCorrect with my physical keyboard via CB10
    05-19-14 08:44 PM
  22. slagman5's Avatar
    So just needed to let you guys know, I'm an *****. Do you know why it wasn't detecting the sensors? Because the sensors were not there, lol. At around the same time AT&T updated to 10.2.1, I also happened to replace my screen at that time. Well, apparently I didn't notice that the sensor array was a separate piece that I had to transfer to the new screen. I just took it apart again today and looked at it and noticed that the module was missing. So I looked at the old screen and it had it, so I pulled it off that and put it on the new screen, put it back together, and voila, everything works... :-)
    05-19-14 11:50 PM
  23. jhanks64's Avatar
    Glad you figured out your issues. I thought the Sprint Q10 update was the latest. I'm using OS 2758 on my VZW Q10.
    05-20-14 12:39 AM
  24. Superfly_FR's Avatar
    For our US fellows Seems to rollout for Europe right now (Z30 as example).
    Sachesi Codes for OS downloads-capture.png
    ZMnsr1 likes this.
    05-27-14 08:07 AM
  25. KporalBoyQ10's Avatar
    For our US fellows Seems to rollout for Europe right now (Z30 as example).
    Click image for larger version. 

Name:	Capture.PNG 
Views:	9932 
Size:	81.5 KB 
ID:	274100
    Thanks for this share bro

    Posted Via my Q10
    05-27-14 08:20 AM
330 123 ...

Similar Threads

  1. Replies: 22
    Last Post: 04-05-14, 10:17 AM
  2. How long for Device Wipe?
    By felixlives in forum BlackBerry Z10
    Replies: 14
    Last Post: 04-02-14, 07:51 PM
  3. Want More NFC Purchase Support? Ask for it.
    By deercreekmichael in forum BlackBerry 10 OS
    Replies: 1
    Last Post: 04-02-14, 06:00 PM
  4. How about old Cartoon Character Stickers For BBM
    By 07thking in forum General BlackBerry Discussion
    Replies: 1
    Last Post: 04-02-14, 05:08 PM
LINK TO POST COPIED TO CLIPBOARD