09-05-15 07:34 PM
226 12345 ...
tools
  1. Kris Simundson's Avatar
    I thought I read that there's a difference between the Q10-1 and the others. Thanks for the correction though.

    EDIT: The difference is with the Z10-1 and the other Z10 and not the Q10.

    Posted via CB10
    All Q10 have same hardware, SQN100-3 however has different radio bands

    STL100-1 (Z10) has a different processor and gpu than the STL100-2/3/4 because the later has LTE where as the former does not
    05-24-13 09:19 PM
  2. yueytan's Avatar
    this is complete madness. I went to sleep disappointed that 2009 came out just after I installed 1916 and now THIS???!!!!
    dbarz likes this.
    05-24-13 09:21 PM
  3. b320's Avatar
    this is complete madness. I went to sleep disappointed that 2009 came out just after I installed 1916 and now THIS???!!!!
    A complete 2342 leak for the Z10 is just around the corner (per other posts on here). Brace yourself.
    yueytan likes this.
    05-24-13 09:24 PM
  4. Kris Simundson's Avatar
    downloading this right now to test with 1721 radio file as its been stated to be working, however I will be working on bringing the Z10 users the proper 2342 with proper radio files
    05-24-13 09:31 PM
  5. yueytan's Avatar
    downloading this right now to test with 1721 radio file as its been stated to be working, however I will be working on bringing the Z10 users the proper 2342 with proper radio files
    thanks for your work mate

    and thanks to the OP for posting this. downloading now! 1916 lasted on my Q10 about 12 hours lol
    05-24-13 09:36 PM
  6. Andrew4life's Avatar
    this is complete madness. I went to sleep disappointed that 2009 came out just after I installed 1916 and now THIS???!!!!
    Well, any changes to the code will cause an increment to the OS version number, regardless of how small or large the change is.
    Given that they are continuously making changes and improvement, the moment you even install an OS, leaked or not, your version is sure to be very outdated already.
    05-24-13 09:38 PM
  7. ldudiaz's Avatar
    downloading this right now to test with 1721 radio file as its been stated to be working, however I will be working on bringing the Z10 users the proper 2342 with proper radio files
    That would be awesome.

    Posted via CB10
    05-24-13 09:44 PM
  8. Mecca EL's Avatar
    Works fine on the Z10...

    Attachment 164922

    Using .2342 OS files and .1721 radio
    Impressed, Phill!
    05-24-13 09:46 PM
  9. Kris Simundson's Avatar
    Installing OS now
    Mecca EL likes this.
    05-24-13 09:46 PM
  10. pVs's Avatar
    anyone know where to download the autoloader from
    05-24-13 09:48 PM
  11. Kris Simundson's Avatar
    anyone know where to download the autoloader from
    Follow the link in the OP?
    05-24-13 09:50 PM
  12. pVs's Avatar
    can u give me a direct link boss , ive looked everywhere still new to BB10
    05-24-13 09:53 PM
  13. Kris Simundson's Avatar
    can u give me a direct link boss , ive looked everywhere still new to BB10
    direct link is in the original post on the last page
    05-24-13 09:55 PM
  14. b320's Avatar
    can u give me a direct link boss , ive looked everywhere still new to BB10
    The direct link is posted in the very first post, the Original Post, in this thread. Click on "First" in the page navigation just above these replies and look for the first link.
    05-24-13 09:55 PM
  15. Phill_UK's Avatar
    Impressed, Phill!
    Cheers Mecca... I surprised myself with that

    I read up on extracting signed OS and radio files from Sachup debrick .bar files, and creating autoloaders using cap, so thought I'd give it a go.

    It was actually easier than I expected, and works flawlessly!
    Mecca EL likes this.
    05-24-13 09:56 PM
  16. pVs's Avatar
    ah **** thanks bro
    05-24-13 09:57 PM
  17. Kris Simundson's Avatar
    For those wanting to install this on their Z10 2/3/4 follow these steps:

    Download Q10 10.1.0.2342, and extract the file.
    As per usual do a backup, and turn off link
    Run autoloader for 10.1.0.2342
    Once autoloader has installed device will state 'Incompatible Radio Image Installed'
    At this point with device still connected, run the 1721 radio image autoloader for Z10
    Hold power button until device resets, and the radio autoloader will kick in
    Autoloader will install radio image
    Phone will now boot into OS
    05-24-13 09:58 PM
  18. hnguyen's Avatar
    With this new leak anyone notice any improvements?

    Posted via CB10
    05-24-13 10:00 PM
  19. Pete The Penguin's Avatar
    All Q10 have same hardware, SQN100-3 however has different radio bands

    STL100-1 (Z10) has a different processor and gpu than the STL100-2/3/4 because the later has LTE where as the former does not
    They're are 2 Q10SQN100-3's sold by Rogers - this will work with both.

    Posted via CB10 from my Q10.
    05-24-13 10:01 PM
  20. Pete The Penguin's Avatar
    Cheers Mecca... I surprised myself with that

    I read up on extracting signed OS and radio files from Sachup debrick .bar files, and creating autoloaders using cap, so thought I'd give it a go.

    It was actually easier than I expected, and works flawlessly!
    I did the same for my Q10 with 2009. Great minds, eh.

    Posted via CB10 from my Q10.
    Mecca EL likes this.
    05-24-13 10:02 PM
  21. Kris Simundson's Avatar
    They're are 2 Q10SQN100-3's sold by Rogers - this will work with both.

    Posted via CB10 from my Q10.
    Rogers sells the SQN100-3 and SQN100-1
    05-24-13 10:03 PM
  22. robsteve's Avatar
    They're are 2 Q10SQN100-3's sold by Rogers - this will work with both.

    Posted via CB10 from my Q10.
    Are there two SQN100-3 or is the only difference black and white? Rogers also has the SQN100-1 for areas without the 2600 LTE.
    05-24-13 10:03 PM
  23. Mecca EL's Avatar
    Cheers Mecca... I surprised myself with that

    I read up on extracting signed OS and radio files from Sachup debrick .bar files, and creating autoloaders using cap, so thought I'd give it a go.

    It was actually easier than I expected, and works flawlessly!
    I knew there was a hybrider lurking in there somewhere!!

    Start a new thread, so we don't steal the shine from the Q folks. I need details...
    05-24-13 10:06 PM
  24. Kris Simundson's Avatar
    Cheers Mecca... I surprised myself with that

    I read up on extracting signed OS and radio files from Sachup debrick .bar files, and creating autoloaders using cap, so thought I'd give it a go.

    It was actually easier than I expected, and works flawlessly!
    did you get a data signal on initial boot or did you need to do a reboot?
    05-24-13 10:06 PM
  25. Mecca EL's Avatar
    For those wanting to install this on their Z10 2/3/4 follow these steps:

    Download Q10 10.1.0.2342, and extract the file.
    As per usual do a backup, and turn off link
    Run autoloader for 10.1.0.2342
    Once autoloader has installed device will state 'Incompatible Radio Image Installed'
    At this point with device still connected, run the 1721 radio image autoloader for Z10
    Hold power button until device resets, and the radio autoloader will kick in
    Autoloader will install radio image
    Phone will now boot into OS
    Kris, is the debrick file packaged as an autoloader already, or we have to use CAP?
    05-24-13 10:09 PM
226 12345 ...

Similar Threads

  1. Leaked Full OS 10.1.0.1627 for z10 stl100-1,2,3
    By lbfe in forum BB10 Leaked/Beta OS
    Replies: 1243
    Last Post: 02-27-14, 08:23 AM
  2. Replies: 1037
    Last Post: 11-16-13, 11:48 AM
  3. Z10 Leaked Full OS 10.1.0.1880 for STL100-2,3
    By lbfe in forum BB10 Leaked/Beta OS
    Replies: 674
    Last Post: 07-10-13, 07:16 AM
  4. Replies: 1098
    Last Post: 05-11-13, 06:08 PM
  5. Replies: 8
    Last Post: 05-01-13, 06:09 PM
LINK TO POST COPIED TO CLIPBOARD