01-08-18 05:51 AM
1,014 ... 1718192021 ...
tools
  1. iiimranch's Avatar
    unable to download right autoloader for my z10 stl100-4 , any one there to help
    12-01-16 07:11 PM
  2. cdnrower's Avatar
    THANKS for adding the links for autoloaders, Blitz's etc.!!! You guys rock.
    12-01-16 07:12 PM
  3. tdyhedge's Avatar
    Z10 stl100-4 , plz give me the link of autoloader
    Oh good lord, here:

    https://mega.nz/#!BNpVFKpT!VEsZTWf7v...SPc_4V7GKP5pW0

    Verizon STL100-4 Autoloader
    zephyr613 likes this.
    12-01-16 07:19 PM
  4. wiseguywood's Avatar
    downloaded autoloaders from thurask google and mega links for my Z10 STL1 and both gave the same problem " stuck on connect to wifi" and reboots after a few mins. can i downgrade back to 10.3.2.2888..??
    Same thing here, except unlocked BB Passport...stumped...for now.
    12-01-16 07:19 PM
  5. ndewa2's Avatar
    Same thing here, except unlocked BB Passport...stumped...for now.
    same here.. still stuck
    12-01-16 07:22 PM
  6. Lusitano17's Avatar
    So I was lazy and didn't want to download yesterday, and now, the update is gone. Wtf

    Posted via CB10
    Given the the lack of anything substantial in this update and the potential glitches, albeit few so far, you aren't missing anything.

    Posted via CB10
    12-01-16 07:25 PM
  7. wiseguywood's Avatar
    same here.. still stuck
    Won't connect to sim, then I skip to wifi, phone never sees anything and reboots. Rinse, repeat, ugh. Even tried loading the new files again. Same result. EDIT Making my own bootloader and trying that now.

    LAST EDIT--made my own bootloader with Darcy's BB Tools using the debrick and radio file from post #1. Loaded it all up and even though I had to reload my apps, it's all good. Thanks to all the crackberry resources and a little patience, running 10.3.3. Nice!!
    Last edited by wiseguywood; 12-01-16 at 08:58 PM. Reason: update
    12-01-16 07:40 PM
  8. Lusitano17's Avatar
    I downloaded a file caled: BL10.3.3.2049.zip from a Google-Drive link from this forum. I up-zip that file into a folder that now contains a lot of .bar files. What is the next step i have to do?
    Appears that you've downloaded a blitz file....if you aren't certain about how to install it's probably best if you go back to first page and source your device files from Thurasks autoloaders.
    Unzip the autoloader to your PC and run the exe file. The bootrom screen should appear....plug in your device and let it do its work.
    Backup any pertinent info beforehand because this process will wipe your data.

    Posted via CB10
    12-01-16 07:47 PM
  9. darito30's Avatar
    Won't connect to sim, then I skip to wifi, phone never sees anything and reboots. Rinse, repeat, ugh. Even tried loading the new files again. Same result.
    Same problem here with BlackBerry Z10 STL100-1, stuck in wifi setup
    12-01-16 07:53 PM
  10. Matrixval's Avatar
    Heh,I took the jump,made none destructive update from 10.3.2.2813(autoloaded last time so this time went for kinda OTA).Extracted apps from debrick stored in new folder,then+core+radio in the same new folder,open Sachesi-connected phone,install only new apps from the created new folder and magic happened,Update completed,only 3 apps were skipped,239 installed.
    No problem with connection to WiFi or Wind network(can"t say better or worse),restarted phone twice,as I do after update before using phone,always,device monitor is here and very happy about it use it all the time,no back up no restore nothing have been done,looks good,better?? don"t know,but phone is usable,can make call,send massage,use browser,email works as before,apps only from BBW no BBVE(you know it),don"t have Android apps installed.Live the phone in charger till full,no use during charge,let see if it was worth to wait for this update one year,but like the #10.3.3.
    Hope it will help to same one. Hey,BIG thanks to OP to make it happened.
    Edit, couldn"t make back up and BB Link take long time to detect device.

    Q10 on Wind,no,Freedom mobile,10.3.3.2049 and still love it,phewww.
    Last edited by Matrixval; 12-01-16 at 08:47 PM.
    12-01-16 08:26 PM
  11. AhmedVitome's Avatar
    I've read that it won't work, so keep 10.3.2 or update at your own risk
    I got this msg nw I'm 10.3.1 user and the Facebook was just working fine i was in side loaded old version.
    OS 10.3.3.2049 live links and autoloaders-img_20161202_045330.png

    Posted via CB10
    12-01-16 08:58 PM
  12. thanhvx's Avatar
    Same problem here with BlackBerry Z10 STL100-1, stuck in wifi setup
    In an attempt to solve problem, I have loaded 10.3.2 again and am using Sachesi to update to 10.3.3. waiting...


    Updated: this work-around does not work. After several reboots, the phone reverts back to 10.3.2.
    Last edited by thanhvx; 12-01-16 at 09:53 PM.
    darito30 likes this.
    12-01-16 09:02 PM
  13. brookie229's Avatar
    I downloaded a file caled: BL10.3.3.2049.zip from a Google-Drive link from this forum. I up-zip that file into a folder that now contains a lot of .bar files. What is the next step i have to do?
    That file is a Blitz file and needs to be installed with the help of your windows PC and a program available called Sachesi. Install Sachesi on your PC, then just drag and drop that zipped file (no need to even unzip it!) onto the install tab of the Sachesi program. This procedure is done, of course, with your BB10 device attached to your PC via usb. If you search these forums you can find more information about Sachesi and how it works.
    12-01-16 09:13 PM
  14. Winstorm's Avatar
    I am also experiencing similar problem installing 10.3.3 on my factory unlocked Z10 (STL100-1). I have tried updating with both Sachesi and Darcy's BB Tools. The initial loading of the update files show completed successfully but then the phone reboots several times and the installation fails, reverting back to 10.3.2. I'm not sure what's the issue here but I would prefer not having to do a clean install with an autoloader since it doesn't appear to be worth the extra effort. I think that I'll wait to see if an OTA update becomes available.

    Posted via CB10
    12-01-16 09:16 PM
  15. conite's Avatar
    I am also experiencing similar problem installing 10.3.3 on my factory unlocked Z10 (STL100-1). I have tried updating with both Sachesi and Darcy's BB Tools. The initial loading of the update files show completed successfully but then the phone reboots several times and the installation fails, reverting back to 10.3.2. I'm not sure what's the issue here but I would prefer not having to do a clean install with an autoloader since it doesn't appear to be worth the extra effort. I think that I'll wait to see if an OTA update becomes available.

    Posted via CB10
    Just use the autoloader.
    12-01-16 09:23 PM
  16. thanhvx's Avatar
    So far Z10 STL 100-1 CAN NOT update to 10.3.3:
    *** Using Sachesi: after several reboots, the phone reverts it self to 10.3.2
    *** Using Autoloader: the phone gets stuck at Network / WiFi connection Step at setup.
    12-01-16 09:51 PM
  17. darito30's Avatar
    In an attempt to solve problem, I have loaded 10.3.2 again and am using Sachesi to update to 10.3.3. waiting...


    Updated: this work-around does not work. After several reboots, the phone reverts back to 10.3.2.
    Nor through non-destructive updating?
    12-01-16 10:06 PM
  18. torcheredsole56's Avatar
    Anyone set alarms and have them work yet? Mine didn't this morning. Rebooted now and waiting for tomorrow. Vzw z30 autoloaded. Thanks (ps loving this os overall, browser response seems better and I've had a better overall user experience with all apps and features. Don't use FB so don't care about that). And battery life in my case is phenomenal (extremely light usage)

    Posted via the CrackBerry App for Android
    12-01-16 10:07 PM
  19. Reizcy's Avatar
    Please add another link to leap, , drive or mega maybe.. the link is overload.. thanks

    Posted via CB10
    12-01-16 10:14 PM
  20. thanhvx's Avatar
    Nor through non-destructive updating?
    Sadly, No.
    12-01-16 10:16 PM
  21. Winstorm's Avatar
    Nah, too much reconfiguring and wasting time without significant new features to be gained, except 3.xxxx. I already installed OTA on my Classic which took about 5 hours so I'm not at all eager to go through another boring setup from scratch on a Z10. I think I'll just wait for an OTA or a better solution, if one is ever available. Either way, I don't think there's much more to gain or loose now. For me, it seems more likely I'll have to get a DTEK android to bring back some excitement. I'm still not sure yet because I don't think life will ever be anything like the good old days of BB 10. However, I guess I'll just have to move on, although reluctantly. The writing is clearly on the wall now and I feel really sad about this unfortunate demise of BlackBerry 10.

    Posted via CB10
    12-01-16 10:25 PM
  22. juvenilejt's Avatar
    IMO the best and fastest experience will be had with 10.3.3 by performing a destructive update via AutoLoader anyway. When jumping branches (10.3.2 to 10.3.3) starting on a clean slate will generally give the best results. The downside is having to set everything up again.
    Yeah, the non-destructive update didn't go well for me this time anyways. Settings and pictures app wouldn't launch, the wallpaper sys bar file installation failed and what not.

    So had to go the autoloader way.
    Feels completely fresh and new that way.

    Plus I don't mind setting things up again... only takes like 15-20 mins!


    Posted via CB10
    12-01-16 10:56 PM
  23. aero1997's Avatar
    i have just installed autoloader from this link:
    https://drive.google.com/drive/folde...VF5emJ0V29xUlE
    and now i cant use any apps even settings is not opening
    can some one help pls its my first time trying to update my phone using autoloaders
    (sry for bad english)
    12-01-16 11:00 PM
  24. sentinelman's Avatar
    did all of that with autoloader from mega and stuck on wifi problem. i thought something was wrong with that autoloader and tried the other one from google drive and same problem. stl1001 is fubar..... never experienced this problem with autoloader and my stl1001 before.
    12-01-16 11:04 PM
  25. Rana_Tauqeer's Avatar
    Used Thurask's autoloaders on my Z10-2 and Z30, all went well. Earlier, checked multiple times for OTA, restarted devices multiple times, still couldn't get update. Couldn't wait anymore so, downloaded autoloaders and phew, all done in no time!!!
    Super excited and checking for anything notable in 10.3.3.
    Posted via CB10
    Last edited by Rana_Tauqeer; 12-02-16 at 01:31 AM.
    12-01-16 11:06 PM
1,014 ... 1718192021 ...

Similar Threads

  1. What's new on 10.3.3 ?
    By YilmzYilmz in forum BlackBerry Passport
    Replies: 103
    Last Post: 12-22-16, 08:38 PM
  2. Problems updating to 10.3.3- Free up space to update
    By Rickster1 in forum BlackBerry 10 OS
    Replies: 6
    Last Post: 12-03-16, 08:16 AM
  3. Tmo Q10 owners / 10.3.3 update
    By macterp in forum BlackBerry Q10
    Replies: 3
    Last Post: 12-01-16, 02:24 PM
  4. 10.3.3
    By LT1500 in forum BlackBerry Passport
    Replies: 1
    Last Post: 11-30-16, 09:51 PM
  5. BlackBerry OS 10.3.4 will be January [Speculation]
    By ohaiguise in forum BlackBerry 10 OS
    Replies: 1
    Last Post: 11-30-16, 08:28 PM
LINK TO POST COPIED TO CLIPBOARD