01-08-18 06:51 AM
1,014 ... 1314151617 ...
tools
  1. mainely_linux's Avatar
    I downloaded all the files for STL100-1 & 3 and put all the .bar into a folder. Not sure the files from STL-3 caused the problem?!
    You would only want the core, radio and apps files in one folder if you wanted to perform a non-destructive update. If you have an STL100-1 the STL100-3 files would certainly cause you a problem.
    12-01-16 11:39 AM
  2. thanhvx's Avatar
    You would only want the core, radio and apps files in one folder if you wanted to perform a non-destructive update. If you have an STL100-1 the STL100-3 files would certainly cause you a problem.
    That is great experience - thanks! This cost me a reset of the device and time [and frustration..].

    Thank mainely_linux!
    12-01-16 11:44 AM
  3. Legal Eagle's Avatar
    For some reason the apps packs extension did its own thing with Mega, please rename with .rar as the extension. Will reupload properly named version to avoid confusion.
    Thanks for clarifying. Renamed as .rar and all extracted fine
    12-01-16 11:46 AM
  4. mainely_linux's Avatar
    This cost me a reset of the device
    IMO the best and fastest experience will be had with 10.3.3 by performing a destructive update via AutoLoader anyway. When jumping branches (10.3.2 to 10.3.3) starting on a clean slate will generally give the best results. The downside is having to set everything up again.
    thanhvx, tezytan and moyah8 like this.
    12-01-16 11:47 AM
  5. mainely_linux's Avatar
    Autoloader List
    Added to OP
    tezytan likes this.
    12-01-16 11:48 AM
  6. darito30's Avatar
    Please I need your help, load the Os to my BlackBerry through autoloader and I can not finish the configuration, do not let me pass the WiFi network, tell me that I am not connected and if I am, please help
    12-01-16 11:58 AM
  7. Radhakrishna Bhandary's Avatar
    Anyone has problems with running apps? Snap, 2Gis, for example, close after running
    Me too. And BBVE is a failure as well for me.


    Posted via CB10
    Flatman and Sime0n_S like this.
    12-01-16 12:03 PM
  8. chopachain's Avatar
    Thanks for clarifying. Renamed as .rar and all extracted fine
    7zip extracted apps pack fine without renaming. Just saying

    Z30, Classic and Passport updated non destructively. BBVE and Hotspot working fine on all three devices. No Problems. Reboots seem faster and all running cool. Seems like android gave BB some tips.
    12-01-16 12:05 PM
  9. mainely_linux's Avatar
    I can not finish the configuration, do not let me pass the WiFi network
    Can you connect to the same WiFi network with other devices? If you have cellular data you should be able to skip the wifi section. You might try to reboot and pause for a bit to allow a data connection to activate before proceeding.
    12-01-16 12:07 PM
  10. thanhvx's Avatar
    Can you connect to the same WiFi network with other devices? If you have cellular data you should be able to skip the wifi section. You might try to reboot and pause for a bit to allow a data connection to activate before proceeding.
    I'am having same problem - Cannot connect to Wifi network.

    I'm on Koodo, rebooting...
    12-01-16 12:14 PM
  11. darito30's Avatar
    Can you connect to the same WiFi network with other devices? If you have cellular data you should be able to skip the wifi section. You might try to reboot and pause for a bit to allow a data connection to activate before proceeding.
    I have rebooted several times, my other devices if they are connected, it is an operating system error I think, I am already doing a cleaning with Sic MultiWipe and I will load the Os again. Very grateful my brother Mainely_Linux
    Paul Collins4 likes this.
    12-01-16 12:22 PM
  12. kleaned's Avatar
    Me too. And BBVE is a failure as well for me.


    Posted via CB10
    I don't have the icon, but BBVE installed and runs from BBW.
    12-01-16 12:27 PM
  13. Lusitano17's Avatar
    Ran the Blitz on my Passport SE and it's now PassportSQW100-4/10.3.3.2049

    Was presented with this at start:

    Attachment 413238

    Never even knew that needed fixing! :-)


    Posted via CB10 on my PassportSQW100-4/10.3.2.2876
    It didn't....it apparently prevents any media rights infringement.
    Same notice popped up after my update and now my Stereotube app no longer has the ability to download. Unfortunate...if I could roll back I would strictly for that app.

    Posted via CB10
    12-01-16 12:33 PM
  14. dragoncurt's Avatar
    Is there any where to download if for the Blackberry Leap.
    12-01-16 12:39 PM
  15. conite's Avatar
    Is there any where to download if for the Blackberry Leap.
    First post. Leap / Classic / Z30 use the identical software.
    12-01-16 12:41 PM
  16. DaFoxGrey's Avatar
    Is there any where to download if for the Blackberry Leap.
    For Leap, use the Z30/Classic files.
    12-01-16 12:42 PM
  17. dragoncurt's Avatar
    Oh thank you both
    DaFoxGrey likes this.
    12-01-16 12:42 PM
  18. Legal Eagle's Avatar
    I don't have the icon, but BBVE installed and runs from BBW.
    Same here with BBVE and I did a non destructive update, but as you say opens from BBW !! Most odd
    Sime0n_S likes this.
    12-01-16 12:45 PM
  19. dragoncurt's Avatar
    It shows up as filefactory is there one to download via Mega. Thanks

    For Leap
    12-01-16 12:50 PM
  20. gpraveenonline's Avatar
    I made simple for you to upgrade the Blackberry Passport 10.3.3.2049 Auto Loader. I Uploaded here. https://drive.google.com/drive/folde...UU?usp=sharing.

    Download and run the .exe file
    Caution: Backup your files, contacts etc. before installation

    Have a Rocking Berry with Latest. WOW!!!

    Praveen Kumar G
    12-01-16 12:53 PM
  21. mainely_linux's Avatar
    is there one to download via Mega?
    First post of this thread.
    12-01-16 12:53 PM
  22. dragoncurt's Avatar
    For the Leap it shows up this Autoloaders from filefactory (high speed service) (Courtesy of Tezytan)

    Sorry for all the questions
    12-01-16 12:59 PM
  23. mainely_linux's Avatar
    For the Leap it shows up this Autoloaders from filefactory
    You can get the z30/classic/leap (all the same) autoloader from Thurasks autoloader links - he has mega and google drive mirrors.
    12-01-16 01:01 PM
  24. dragoncurt's Avatar
    Thank you
    12-01-16 01:05 PM
  25. dragoncurt's Avatar
    Will this one be okay then from the mega link

    z30_10.3.03.24049_STA100-1-2-3-4-5-6,7Z

    Thanks
    12-01-16 01:10 PM
1,014 ... 1314151617 ...

Similar Threads

  1. What's new on 10.3.3 ?
    By YilmzYilmz in forum BlackBerry Passport
    Replies: 103
    Last Post: 12-22-16, 09:38 PM
  2. Problems updating to 10.3.3- Free up space to update
    By Rickster1 in forum BlackBerry 10 OS
    Replies: 6
    Last Post: 12-03-16, 09:16 AM
  3. Tmo Q10 owners / 10.3.3 update
    By macterp in forum BlackBerry Q10
    Replies: 3
    Last Post: 12-01-16, 03:24 PM
  4. 10.3.3
    By LT1500 in forum BlackBerry Passport
    Replies: 1
    Last Post: 11-30-16, 10:51 PM
  5. BlackBerry OS 10.3.4 will be January [Speculation]
    By ohaiguise in forum BlackBerry 10 OS
    Replies: 1
    Last Post: 11-30-16, 09:28 PM
LINK TO POST COPIED TO CLIPBOARD