03-29-15 05:20 PM
472 ... 56789 ...
tools
  1. blackbird666's Avatar
    I'm getting this error while trying to install it using sachesi non destructive



    While sending: qc8960.wtr5-10.3.1.822-nto+armle-v7+signed.bar Error: failure 881 required signatures missing (AUTHOR) ???




    Z30STA100-2/10.3.0.1418 ?
    10-19-14 03:47 PM
  2. dpw09's Avatar
    But it does not work. I have tried the work around on 10.3.1.396 and it didn't work either. If someone have some solution I appreciate it very much.
    I made a custom profile and activated it. Then I put the phone in bedside mode and make a call. No ring. I think nothing goes to work when phone in bedside mode.

    Posted via CB10
    Why are you making a custom profile and activating it? There is a "bedside" profile. This is the one you need to configure how you want it (which by default has all sounds/led/vibrate disabled). It's tied to bedside mode when bedside mode is enabled.

    Z10STL100-3/10.3.1.821
    10-19-14 03:52 PM
  3. g33kphr33k's Avatar
    I can't BES activate on this build.

    It goes through all the motions and then deactivates and deletes the work space...

    Posted via CB10
    10-19-14 03:55 PM
  4. mixsiak's Avatar
    Whoa, didn't see it mentioned yet,, anyone see the zoom out feature in the runtime?
    yeap..its correct..thats a googd one

    Q10 OS 10.3.1.821
    10-19-14 03:57 PM
  5. mu57afa's Avatar
    Can anyone confirm this same issue with the keyboard not being brought up when replying to pop up text and BBM notifications?


    Attachment 307390

    Posted via CB10
    Yes this happens to me. Got to click in the field a few times. Works on and off


    Still having compose problems with the hub

    Posted via CB10
    brianr549 likes this.
    10-19-14 04:09 PM
  6. Jorge Zile Vaccaro's Avatar
    playback of videos on instagram not working properly, the video lag
    Last edited by Jorge Zile Vaccaro; 10-19-14 at 04:19 PM.
    10-19-14 04:09 PM
  7. tickerguy's Avatar
    Radio power consumption on LTE in standby is quite high on T-Mobile -- by a factor of ~3 or so compared to 10.2.1 and about a factor of 2 compared to 10.3.0.

    That's a bummer; when on WiFi the power consumption is normal.
    10-19-14 04:10 PM
  8. 1oo1's Avatar
    OS 10.3.1.821 Fixes & Findings thread-picsart_1413752883681.jpg

    Is this new ? (See red circle)
    I updated from 10.3 so might have been there in the earlier build.

    Posted via Cb10 on 10.3.0.1418
    10-19-14 04:10 PM
  9. dpw09's Avatar
    Click image for larger version. 

Name:	PicsArt_1413752883681.jpg 
Views:	1781 
Size:	45.3 KB 
ID:	307463

    Is this new ? (See red circle)
    I updated from 10.3 so might have been there in the earlier build.

    Posted via Cb10 on 10.3.0.1418
    Not sure what build that came in but was before this one. Means you have already replied I believe.

    Z10STL100-3/10.3.1.821
    1oo1 likes this.
    10-19-14 04:12 PM
  10. rafaelrgsmex's Avatar
    How do you do that
    10-19-14 04:26 PM
  11. adamlau's Avatar
    While sending: qc8960.wtr5-10.3.1.822-nto+armle-v7+signed.bar Error: failure 881 required signatures missing (AUTHOR) ???
    I also received the same message when performing a non-destructive for the Z30.
    blackbird666 likes this.
    10-19-14 04:28 PM
  12. conite's Avatar
    Sorry for cross posting from the other 821/800 thread, but I'm not getting any responses there on this issue.

    Is the Bedside Notifications bug solved in this leak? Or do you still have to do the workaround, that is, setting Notifications first to Phone Only, then clicking on the Clock icon and setting Bedside mode from the Clock, in order to avoid audible alerts from emails, messages, etc., to get the phone to ring, and also to be able to have the clock on the screen.
    My phone does not ring through on bedside mode when it should. Same as 10.3.1.632.

    Z30STA100-5/10.3.1.800
    10-19-14 04:37 PM
  13. fjfisher601#AC's Avatar
    Bottom line me folks- I just installed 1418 a few days ago- its running just fine- no issues- so I this a daily driver ? I see issues- are they minor enough to warrant installing- ?
    10-19-14 04:38 PM
  14. stardomains's Avatar
    I can no longer Bluetooth files to my MacBook when I could no problem before. But I updated to Yosemite the other day and perhaps that is the issue.

    Posted via CB10
    10-19-14 04:42 PM
  15. conite's Avatar
    Bottom line me folks- I just installed 1418 a few days ago- its running just fine- no issues- so I this a daily driver ? I see issues- are they minor enough to warrant installing- ?
    I find this heads above the 10.3.0 branch. Perfectly solid for daily use.


    Z30STA100-5/10.3.1.800
    10-19-14 04:48 PM
  16. Q10Bold's Avatar
    I like this build. Tomorrow is a work day, so gonna see if it works

    Posted via CB10
    10-19-14 04:50 PM
  17. nah.uhh's Avatar
    Advanced interactions: with "stay awake" and "flip to save power" both enabled, flip to save power doesn't always work. It works 100% of the time when stay awake is disabled, but only like 50% with stay awake enabled.

    Don't think I had this problem on 632. Haven't tried 800 yet so im not sure if it has the same problem

    *note* might be because I upgraded nondestructively from 10.3.0.1418*

    I'm you want to test it, turn on flip to save power, stay awake and change display timeout to 10 seconds.

    Place phone facedown on a table etc, with some of the bottom of the screen handing out the edge so you can easily see when the light goes out.
    With stay awake disable: it blanks instantly everytime you let put the phone down
    With stay awake enabled: sometimes it doesn't blank
    10-19-14 04:59 PM
  18. KenV54's Avatar
    My phone does not ring through on bedside mode when it should. Same as 10.3.1.632.

    Z30STA100-5/10.3.1.800
    Thanks. You and I have been dealing with this issue all along.

    Apparently there are new clock settings in this version that let you set Bedside mode from the clock. Have you tried that?

    I'm holding off loading this leak for now. There seem to be too many potential pitfalls and not a whole lot of upside to it over 632.

    Posted via CB10
    10-19-14 05:00 PM
  19. nah.uhh's Avatar
    Thanks. You and I have been dealing with this issue all along.

    Apparently there are new clock settings in this version that let you set Bedside mode from the clock. Have you tried that?

    I'm holding off loading this leak for now. There seem to be too many potential pitfalls and not a whole lot of upside to it over 632.

    Posted via CB10
    This is the profile used for bedside mode..
    Note that vibe and sound are grayed out.

    I don't see any reason for the existence of these crippled profiles (meeting and bedside mode).
    Ideally, you should be able to choose which profile bedside/meeting mode enables (including custom profiles)

    OS 10.3.1.821 Fixes & Findings thread-img_20141019_184104.png
    10-19-14 05:43 PM
  20. zack west's Avatar
    Calendar has some annoying bugs. If I click on a different date, it'll light up two dates and I gotta either close the app or keep clicking on the current date.

    Z10STL100-4/10.3.1.821
    Attachment 307485
    Last edited by zack west; 10-19-14 at 06:04 PM.
    10-19-14 05:43 PM
  21. Winstorm's Avatar
    It appears that upgrading from 10.3.0.1418 via the Sachesi non destructive method is not a good way to go. I had similar problems with my STL-1 which would not connect to either Sachesi or BlackBerry Link after the upgrade. Then I couldn't get to view both internal and SD storage devices. Also, the Dark background in Contacts view would not save. I tried various ways, shutting down and restarting the phone, loading the newer bars from 10.3.1.800,etc. without success. Eventually, my decision to reinstall using the autoloader method and without restoring any data seemed to have resolved all the issues mentioned.
    10-19-14 05:45 PM
  22. Niels B's Avatar
    I used the autoloader and then I did wipe the phone. Started clean and I'm very pleased with the new OS. Everything seems to be working smooth. I have a Q10 from Verizon.

    Visit my BBM Channel - C000E96F6
    That's the way you do it! :-)

    Q10 OS10.3.1.821
    10-19-14 05:45 PM
  23. nah.uhh's Avatar
    Calendar has some annoying bugs. If I click on a different date, it'll light up two dates and I gotta either close the app or keep clicking on the current date.

    Z10STL100-4/10.3.1.821
    Did you load the newer 800 app bars?
    I'm running 821 straight (non destructive from 1418). Ejthe I don't understand, or I can't reproduce.
    I tried tapping dates in all different views and don't see any problems
    10-19-14 05:46 PM
  24. dwane32's Avatar
    All my android apps crash trying to open. Any ideas
    10-19-14 05:48 PM
  25. nah.uhh's Avatar
    All my android apps crash trying to open. Any ideas
    Yes. Wait for device monitor > cpu to calm down
    10-19-14 05:49 PM
472 ... 56789 ...

Similar Threads

  1. 10.3.1.821 links LIVE
    By DarcyTallGuy in forum BB10 Leaked/Beta OS
    Replies: 752
    Last Post: 02-16-15, 02:36 PM
  2. 10.3.1.800 vs 10.3.1.821
    By JexterTuazon in forum BB10 Leaked/Beta OS
    Replies: 76
    Last Post: 10-22-14, 04:25 PM
  3. BlackBerry 10 or Q5 books?
    By UKrussia in forum BlackBerry Q5
    Replies: 1
    Last Post: 10-19-14, 05:16 PM
  4. Why can't my BB Link find photos on my Passport?
    By MapleLane in forum BlackBerry Passport
    Replies: 0
    Last Post: 10-18-14, 09:35 PM
  5. Latest Leak: 10.3.1.800
    By clwydog in forum BB10 Leaked/Beta OS
    Replies: 2
    Last Post: 10-18-14, 07:34 PM
LINK TO POST COPIED TO CLIPBOARD