05-03-15 01:43 AM
42 12
tools
  1. Mustafa Bepari's Avatar
    Its been a couple of hours since I updated to 10.3.1.1154. And just now I realized that I'm not getting any notifications at all; no LED, no sound and no vibration.

    Is there any fix for this? Is anyone else having this problem?

    Thanks!
    12-07-14 05:50 AM
  2. Hamilton Guy's Avatar
    It would help us help you, if you could post a screenprint of your current notifications settings.
    12-07-14 05:55 AM
  3. RubenDM's Avatar
    Tried a hard reset?

    Posted via CB10
    12-07-14 05:59 AM
  4. Mustafa Bepari's Avatar
    It would help us help you, if you could post a screenprint of your current notifications settings.
    Nightmare just started! 10.3.1.1154 On Z10 STL100-1-img_20141207_180232.pngNightmare just started! 10.3.1.1154 On Z10 STL100-1-img_20141207_180250.png

    Tried a hard reset?
    I've tried holding down the volume buttons for 30 secs. I've tried holding the volume up and power button for 30 secs, nothing happens and tried with just the power button. Obviously the phone turns off.

    Any more suggestions?
    12-07-14 06:09 AM
  5. ATV_Hightower's Avatar
    Which update method did you use? autoloader or update?

    I would recommend a security wipe or a fresh installatation via autoloader.
    12-07-14 06:12 AM
  6. Mustafa Bepari's Avatar
    Which update method did you use? autoloader or update?

    I would recommend a security wipe or a fresh installatation via autoloader.
    I used an autoloader. Doing a security wipe now.

    ** Update **

    Done security wipe, still the same. Notifications don't work, not even Instant Previews.
    Last edited by Mohammed Mostafa; 12-07-14 at 07:00 AM. Reason: Update
    12-07-14 06:18 AM
  7. Mustafa Bepari's Avatar
    Here's another piece of the nightmare haha!

    Nightmare just started! 10.3.1.1154 On Z10 STL100-1-img_20141207_182027.png
    12-07-14 06:21 AM
  8. m3ach's Avatar
    The up and down volume buttons reset method doesn't work on your model, turn the phone off and pull the battery instead.

    I presume you loaded the correct software version for your phone?

    It isn't the same as the other versions, make sure it is for the STL100-1.

    Posted via CB10 using my Z10 STL100-2 /10.2.1.3247
    12-07-14 06:34 AM
  9. Mustafa Bepari's Avatar
    The up and down volume buttons reset method doesn't work on your model, turn the phone off and pull the battery instead.

    I presume you loaded the correct software version for your phone?

    It isn't the same as the other versions, make sure it is for the STL100-1.

    Posted via CB10 using my Z10 STL100-2 /10.2.1.3247
    Yes, it said Z10 STL100-1. I believe there's only one source here in CB, the one from bitcasa.
    12-07-14 06:41 AM
  10. VIP30's Avatar
    Just open & read .1154 findings & fixes from the 1st page...
    That will definitely helps...
    Cheers...

    ODIN 9520 / 5.0.0.1743 Hybrid / 1850mAh
    12-07-14 07:00 AM
  11. Mustafa Bepari's Avatar
    I'm done guys. I'll just downgrade to 10.3.0.1154 for now. Thanks for all the help and suggestions. This 10.3.1.1154 is a dev leak, its not supposed to run smoothly I guess. Other than those above mentioned issues, there are tons more, so will wait it out. Thanks again!
    12-07-14 07:06 AM
  12. masterscarhead1's Avatar
    I'm done guys. I'll just downgrade to 10.3.0.1154 for now. Thanks for all the help and suggestions. This 10.3.1.1154 is a dev leak, its not supposed to run smoothly I guess. Other than those above mentioned issues, there are tons more, so will wait it out. Thanks again!
    You're the first to have this issue. I think you probably didn't look into the app specific notifications
    12-07-14 07:18 AM
  13. instrumentmech's Avatar
    Same thing happened to my phone when I upgraded. Take out the battery for a minute or so. It should be OK after you restart it. It fixed my problem. Oh, and I'm also using a STL100-1.

    Posted via CB10
    ksantor likes this.
    12-07-14 07:27 AM
  14. bobshine's Avatar
    Just go to notifications settings and reset all notifications to default. It was a known issue

    Posted via CB10
    12-07-14 07:36 AM
  15. Mustafa Bepari's Avatar
    Just go to notifications settings and reset all notifications to default. It was a known issue

    Posted via CB10
    Man I hope this will fix it, thanks a lot!

    ** Update **

    It worked! Thank you so much dude! Let's wait and see if this issue will reappear.
    Last edited by Mohammed Mostafa; 12-07-14 at 07:55 AM. Reason: Update
    12-07-14 07:39 AM
  16. Mustafa Bepari's Avatar
    You're the first to have this issue. I think you probably didn't look into the app specific notifications
    I really poked around in that area for a while, no matter what settings I use, it doesn't work. No sound, no LED, no vibration and no instant previews either. Let me try turning it off and pulling out the battery.

    ** Update **

    I just restarted the phone, and now it greeted me with the welcome screen. Didn't see that since the update, only now.
    Last edited by Mohammed Mostafa; 12-07-14 at 07:48 AM. Reason: Update
    12-07-14 07:44 AM
  17. FF22's Avatar
    They seem to have moved the location where you set up the various alerts (led and sounds).

    Open Notifications. Where is says NORMAL. Tap that. On the next screen Tap "Customize App Noti..." Now you can set PHONE. Email will allow you to set each email account's alerts, including tune, vibrate, led, volume..... It took me a while to find that.
    12-07-14 08:53 AM
  18. singhvikas101's Avatar
    Good, that things are settled for you! I downgraded to 10.2 since it has the best radio, otherwise all good!
    Cheers!
    12-07-14 08:54 AM
  19. masterscarhead1's Avatar
    Good, that things are settled for you! I downgraded to 10.2 since it has the best radio, otherwise all good!
    Cheers!
    I think 10.2 didn't have a better radio, but it just showed more bars
    At least that's the experience I got on Telus
    12-07-14 09:26 AM
  20. dhodoagger's Avatar
    all stl1 user who are having issue after installing 10.3.1.938 or 10.3.1.1016 no notification issue on call and on sms or any other notification and no initial setup........... simply load the loader of 10.2.1 ( in my case it was 10.2.1.3442 or 10.2.1.2977 ) and then load this leak 10.3.1.1016

    if you have this issue of notification people say open oobe:// in web browser for initial setup but that do not solve notification issue ... or other solution are many restarts or hard reset

    but the one i am just mentioning is 2000 % verified ....... In your first attempt if you have issue just load 10.2.1 then complete setup and start loading 10.3.1.1016 you will see initial setup and no notification issue

    i dont know the link but i have tested it many time
    12-07-14 09:28 AM
  21. Morfiq's Avatar
    There will be a bug in any leaked os.. so deal with it.. im having it too

    Posted via CB10
    12-07-14 09:40 AM
  22. inonaz's Avatar
    Its been a couple of hours since I updated to 10.3.1.1154. And just now I realized that I'm not getting any notifications at all; no LED, no sound and no vibration.

    Is there any fix for this? Is anyone else having this problem?

    Thanks!
    It is a problem of filtration that you got to do the initial setup. To do this you got to get the battery and SIM card for 10 min and restart. If so do not start again until skip the initial setup. My step on me and once everything works perfect.

    Posted via CB10
    ksantor likes this.
    12-07-14 09:53 AM
  23. masterscarhead1's Avatar
    all stl1 user who are having issue after installing 10.3.1.938 or 10.3.1.1016 no notification issue on call and on sms or any other notification and no initial setup........... simply load the loader of 10.2.1 ( in my case it was 10.2.1.3442 or 10.2.1.2977 ) and then load this leak 10.3.1.1016

    if you have this issue of notification people say open oobe:// in web browser for initial setup but that do not solve notification issue ... or other solution are many restarts or hard reset

    but the one i am just mentioning is 2000 % verified ....... In your first attempt if you have issue just load 10.2.1 then complete setup and start loading 10.3.1.1016 you will see initial setup and no notification issue

    i dont know the link but i have tested it many time
    Makes little to no sense to me. Can you link where others have found this has resolved the problem?
    12-07-14 03:14 PM
  24. Mustafa Bepari's Avatar
    Good, that things are settled for you! I downgraded to 10.2 since it has the best radio, otherwise all good!
    Cheers!
    Are you kidding dude? I'm tethering my wired Internet from my laptop via WiFi to my phone. And located on the 4th floor... I get my WiFi signal on the ground floor and even if I walk a bit further from my building. This I got on 10.3.0.1418 and now on the current OS, which is 10.3.1.1154.

    Z10STL100-1/10.3.1.1154
    12-08-14 04:57 AM
  25. vbdwork's Avatar
    I think 10.2 didn't have a better radio, but it just showed more bars
    At least that's the experience I got on Telus
    Not really. I'm on Telus and the only OS allowing me to make a phone call from my underground garage is 10.2.2. All 10.3.x leaks I have tried show no signal, including latest 1154. Same thing with official 10.2.1 release.
    12-08-14 06:42 AM
42 12

Similar Threads

  1. Replies: 5
    Last Post: 10-06-15, 04:11 AM
  2. Snap 10 Privacy Policy Questions
    By xccxcc in forum BlackBerry 10 Apps
    Replies: 3
    Last Post: 12-07-14, 11:22 PM
  3. Device Monitor 10.3.1
    By Grzesiek Godlewski in forum BB10 Leaked/Beta OS
    Replies: 6
    Last Post: 12-07-14, 10:39 AM
  4. World lens app for BlackBerry Z10
    By Jumana Nooruddin in forum Ask a Question
    Replies: 0
    Last Post: 12-07-14, 05:36 AM
  5. Location Services - Been using it on standby mode
    By Benjamin Tam in forum BlackBerry Passport
    Replies: 0
    Last Post: 12-07-14, 04:40 AM
LINK TO POST COPIED TO CLIPBOARD