01-06-14 04:13 PM
961 ... 2627282930 ...
tools
  1. ttz's Avatar
    Loaded 4633...
    Good: battery life better than previous leak (it still sucks, but hey, that's part and parcel of Z10 ownership)
    Bad: Alitalia app no longer working (it's not that good anyway and can do without)

    As usual, thanks for publishing the leak. BB should buy Crackberry for whatever price they ask for, BB without CB is worthless.
    bbfan1040 likes this.
    07-16-13 01:20 PM
  2. vishalkapoor77's Avatar
    Install the correct os and you should be fine. It might even be enough to just replace the data file.

    Posted via CB10
    Thanks for replying, downloading new OS now, will seek further help in case any issue persists.
    07-16-13 01:22 PM
  3. Ashish Sanghvi's Avatar
    Steps to prepare your phone for a restore...

    1.) Enable airplane mode (disabling all radios on the device).
    2.) Plug phone in via USB and reboot phone.
    3.) When phone boots, DO NOT TOUCH IT. Let it sit for 5 minutes undisturbed after it gets to the lock screen.
    4.) Start restore from BB Link after waiting for 5 minutes after boot.

    Give that a shot and see what happens. I've never had the restore problem and have always recovered all my old data (SMS, BBM conversations, etc all restore just as they were before the upgrade) Granted that's only a portion of the procedure I follow, it's also not the only way to get a working backup / restore.
    After the installation should i wipe the phone or not? or just follow your procedure for restore after the installation?
    07-16-13 01:24 PM
  4. Adam Szucs's Avatar
    Guys, i'm in BIG problem. i'm using stl1 but by mistake i uploaded OS for 2/3/4, now everything is working but there is NO network (i can't make call n sms). Battery pulled etc done.
    what should i do now. Should i upload OS for stl 1 on the current OS or should wipe?? Will correct OS upload correct the problem
    Pls guide.

    Thanks
    You can't install those builds on STL100-1. It's simply impossible.

    Posted via CB10 from my awesome Z10
    07-16-13 01:26 PM
  5. vishalkapoor77's Avatar
    You can't install those builds on STL100-1. It's simply impossible.

    Posted via CB10 from my awesome Z10
    I simply downloaded the OS on my computer, run the autoloader and connected my phone and within 5-10 secs it rebooted and everything remained same, only network was gone, Wifi working otherwise.
    Adam Szucs likes this.
    07-16-13 01:33 PM
  6. thurask's Avatar
    I simply downloaded the OS on my computer, run the autoloader and connected my phone and within 5-10 secs it rebooted and everything remained same, only network was gone, Wifi working otherwise.
    Honestly, I'd recommend installing the actual STL100-1 OS, but it might be worth it to try a STL100-1 radio file.

    Using Sachesi, or Darcy's tools, or cap, create an autoloader from this file:
    Radio_Z10_10.1.00.4634_STL100-1.1.Radio.Signed (28.2 MB)
    https://mega.co.nz/#!HMcDBB6Y!ZmxJjD...T_v-q37h1iuaI0
    vishalkapoor77 likes this.
    07-16-13 01:38 PM
  7. vishalkapoor77's Avatar
    Completed correct OS download on phone, Network issue resolved , now wiping the phone. Will update about the performance of this OS on stl-1 after using for 48 hrs, my main concern is battery life as my talk time 4-5 hrs/day, 20-30 sms, 5-10 mails and lots of whatsapp and bbm.

    Thanks for all the help guys.
    geekaren likes this.
    07-16-13 01:45 PM
  8. deezy87's Avatar
    The backing up and restoring never worked for me in the past. With these 3 or 4 leaks I managed to get it down and get everything restored.


    1. - Put the BlackBerry into airplane mode.

    2. - Open up Link and Backup, then close Link once the backup is finished.

    3. - Run the Autoloader, and go through the setting up do not sign into BB ID.

    4. - Security Wipe

    5. - Run the initial set up, this time I sign into BB ID.

    6. - Once set up has completed I switch the device name to what I had at the time of the backup. In this case I always rename my device to BLACKBERRY-Q10. By default it is BLACKBERRY-7CC0.

    7. - I open Link with the renamed BlackBerry, and it always allows me to restore the backup I just made about a half hour ago.


    Hope this helps you guys!
    07-16-13 01:48 PM
  9. vptsff's Avatar
    How about ***** Contact and incoming call Name? I am sad with Contact and Incoming call name of 10.1.0.4543.
    After wiping, then the problem was gone!
    07-16-13 01:49 PM
  10. Remrose's Avatar
    Has anyone gotten VVM (Rogers) up and running on this leak? I cannot even find where to reactivate it.
    No it is not available/working in this leak (or last). Called Rogers and had them convert VVM to MMS notification method. That works the same except message is in text area instead of voice mail area in HUB.
    07-16-13 01:58 PM
  11. Aleksandar Vukosav's Avatar
    STL100-1 turn off at 30% of battery.
    Also observe how fast it charges up to 100% before it turned off. Within an hour.

    New leak: BB 10.1.0.4633 - all models-img_00000078.jpg
    07-16-13 02:18 PM
  12. JamieWilson01's Avatar
    Best leak so far for me. Have used every leak available for STL100-2 and found a few to have horrific battery life but this build is great after 2 days usage.
    In case your wondering I didn't do a restore just a clean, start from scratch install.
    Also i'm in the UK.

    Posted via CB10 on my sexy Z10 STL100-2
    07-16-13 02:30 PM
  13. thurask's Avatar
    Okay, downgrading from 10.2 until we get something newer than .483 that actually works.

    Security wiped, installed autoloader, security wiped again, don't plan on restoring. As clean as it'll get.
    07-16-13 02:49 PM
  14. jerzysent's Avatar
    The backing up and restoring never worked for me in the past. With these 3 or 4 leaks I managed to get it down and get everything restored.


    1. - Put the BlackBerry into airplane mode.

    2. - Open up Link and Backup, then close Link once the backup is finished.

    3. - Run the Autoloader, and go through the setting up do not sign into BB ID.

    4. - Security Wipe

    5. - Run the initial set up, this time I sign into BB ID.

    6. - Once set up has completed I switch the device name to what I had at the time of the backup. In this case I always rename my device to BLACKBERRY-Q10. By default it is BLACKBERRY-7CC0.

    7. - I open Link with the renamed BlackBerry, and it always allows me to restore the backup I just made about a half hour ago.


    Hope this helps you guys!
    Unfortunately doesn't work. SMS are correctly restored only on .4285
    07-16-13 03:00 PM
  15. thatplaybookguy's Avatar
    I find this one to be a bit of a battery hog....
    07-16-13 03:19 PM
  16. branza's Avatar
    Anyone problems with Gmail? Setting it up, and than the next day cant login? Have to delete, and add the account again?
    07-16-13 03:24 PM
  17. Alexey Chumakov's Avatar
    I cannot login to Evernote... it happened on 4543 too...
    Same with me. These theps help:
    1. With Evernote web interface, remove access rights granted to BB.
    2. Remove Evernote account in your BB10 device.
    3. Re-add evernote account.

    -- Cheers from Moscow Z10@.4543
    07-16-13 03:27 PM
  18. Suraj Jadhav's Avatar
    @Vukosov
    Get your self replacement battery from BlackBerry Support Centre. I haven't got mine yet since 15 days but that's the solution to start with according to me. May not be correct for all but my experience says that after trying all other methods such as so called on board battery meter reset.


    Posted Via CB10 On Z10STL100-1/10.1.0.4633
    07-16-13 03:29 PM
  19. Sinnaz0790's Avatar
    Well app world took longer than usual to install app notice a big difference with signal strength on this radio file being used had email and contacts issue but a reboot fixed that will use and monitor loading back apps from.sctatch to test and depending on if this version has to settle in will see how the signal strength goes and I will keep posting feed back


    Posted via CB10
    07-16-13 03:34 PM
  20. Adam Szucs's Avatar
    I simply downloaded the OS on my computer, run the autoloader and connected my phone and within 5-10 secs it rebooted and everything remained same, only network was gone, Wifi working otherwise.
    That OS not even can touch your phone. The hardware is incompatible, so won't load up anything. Maybe the bootloader, but I'm not even sure about it, but definitely wouldn't touch the OS irself.

    Posted via CB10 from my awesome Z10
    07-16-13 03:35 PM
  21. kiddoo24's Avatar
    STL100-1 turn off at 30% of battery.
    Also observe how fast it charges up to 100% before it turned off. Within an hour.

    Click image for larger version. 

Name:	IMG_00000078.jpg 
Views:	1362 
Size:	41.8 KB 
ID:	183218
    Thats because of the SecWipe. I'm 100% sure you did a security wipe, right?
    I'm planning on writing to BlackBerry to recognize this flaw.

    Posted via CB10
    07-16-13 03:47 PM
  22. anon(3072139)'s Avatar
    No it is not available/working in this leak (or last). Called Rogers and had them convert VVM to MMS notification method. That works the same except message is in text area instead of voice mail area in HUB.
    Thanks. Just went back to Q10SQN100-3/10.1.0.4285 where vvm works.

    Posted via CBQ10
    07-16-13 03:48 PM
  23. kiddoo24's Avatar
    I find this one to be a bit of a battery hog....
    I get great idle time, but man, when im using it battery goes down hill and fast!

    Posted via CB10
    07-16-13 03:49 PM
  24. AleksanVuk's Avatar
    Yes I did sec whip after os upgrade.

    Z10 STL100-1 for personal and 9360 for business
    07-16-13 03:49 PM
  25. Ashish Sanghvi's Avatar
    The backing up and restoring never worked for me in the past. With these 3 or 4 leaks I managed to get it down and get everything restored.


    1. - Put the BlackBerry into airplane mode.

    2. - Open up Link and Backup, then close Link once the backup is finished.

    3. - Run the Autoloader, and go through the setting up do not sign into BB ID.

    4. - Security Wipe

    5. - Run the initial set up, this time I sign into BB ID.

    6. - Once set up has completed I switch the device name to what I had at the time of the backup. In this case I always rename my device to BLACKBERRY-Q10. By default it is BLACKBERRY-7CC0.

    7. - I open Link with the renamed BlackBerry, and it always allows me to restore the backup I just made about a half hour ago.


    Hope this helps you guys!
    I Dont remember What was the exact name of my device as i keep changing it. Sometimes its AshishZ10 Ashish-z10 or blackbeast. what to do in this case?
    07-16-13 03:56 PM
961 ... 2627282930 ...

Similar Threads

  1. new wallpaper for the crackberry fanatics!
    By beman39 in forum PlayBook Wallpapers
    Replies: 3
    Last Post: 04-11-15, 10:49 PM
  2. 10.2 on dev C and Headphones
    By DisturbedRocks31 in forum BB10 Leaked/Beta OS
    Replies: 8
    Last Post: 08-13-13, 09:12 AM
  3. New Z10 Owner
    By Aleij Barb in forum BlackBerry Z10
    Replies: 22
    Last Post: 08-12-13, 05:50 PM
  4. I Need Help Updating to 10.2 on 100-1
    By rjerrell87 in forum BB10 Leaked/Beta OS
    Replies: 6
    Last Post: 08-11-13, 08:53 AM
  5. A Blackberry problem we all know
    By duckshooter in forum General BlackBerry Discussion
    Replies: 4
    Last Post: 08-11-13, 12:35 AM
LINK TO POST COPIED TO CLIPBOARD