04-06-14 02:15 PM
563 ... 1213141516 ...
tools
  1. Tater Tots's Avatar
    If you bother to read the very first post in this thread, you will find that which you seek...

    Posted via CB10
    Let me rephrase my post. Country Code 310 and carrier 260 and 160 aren't showing up as an update.
    03-19-14 03:18 PM
  2. russworman's Avatar
    Let me rephrase my post. Country Code 310 and carrier 260 and 160 aren't showing up as an update.
    According to other posts it is hit or miss and if it doesn't work then you will have to try later... there are no other codes

    Posted via CB10
    03-19-14 03:20 PM
  3. zmsox's Avatar
    at the moment no updates, they have took it down i think

    MyToobsAreLeaking presents 10.2.1.2234 for all devices-screenshot-2014-03-19-20.30.11.png
    MyToobsAreLeaking presents 10.2.1.2234 for all devices-screenshot-2014-03-19-20.29.55.png
    03-19-14 03:31 PM
  4. Paul Ogorzow's Avatar
    According to other posts it is hit or miss and if it doesn't work then you will have to try later... there are no other codes
    Correct! Tried over an hour until it started working...
    zmsox likes this.
    03-19-14 03:34 PM
  5. zmsox's Avatar
    you have got the files today over sachesi? using the codes 310/260 or 160 for the STL 100-2/3 ?

    Correct! Tried over an hour until it started working...
    03-19-14 03:37 PM
  6. go1ndr's Avatar
    Just as you've written the answer it started working. I had to start Sachesi several times.

    Thanks a lot!
    Once it is downloaded and then loaded on the phone, the phone will reboot which takes about 5-10 mins. Be patient and once it comes up, you'll be very happy. Great OS! Thanks for the leak Toobs, and for the codes that have been posted. Great OS! Now if we could get Link working!
    03-19-14 03:39 PM
  7. Paul Ogorzow's Avatar
    @zmsox
    Yes sir. Take a look at post #325 and you will see the exact time i got the files. I used 310/160.

    @go1ndr
    Once again - thank you. It's still installing...
    zmsox likes this.
    03-19-14 03:39 PM
  8. diegonei's Avatar
    same question here
    Grab the Z30 software using sachesi and one of the many radio files for your Z10 model. Replace the radio in the folder and install. As an alternative, you can grab both radio and OS (again, files can be found here) and either the zipped bar for the apps or extract them from an autloader.

    (You guys could have figured that one out by readig the thread.)

    It is a strange scenario we have here, the update will vanish from time to time. I could not find it this morning, while a friend in Portugal was able to download it at the same time. It's showing now. Quite the oddity.
    zmsox likes this.
    03-19-14 03:44 PM
  9. heading4tomorrow's Avatar
    Grab the Z30 software using sachesi and one of the many radio files for your Z10 model. Replace the radio in the folder and install. As an alternative, you can grab both radio and OS (again, files can be found here) and either the zipped bar for the apps or extract them from an autloader.

    (You guys could have figured that one out by readig the thread.)

    It is a strange scenario we have here, the update will vanish from time to time. I could not find it this morning, while a friend in Portugal was able to download it at the same time. It's showing now. Quite the oddity.
    There is no chance of this update being corrupted or missing files, etc during download since we can see it time to time disappear and come back mysteriously..
    Just to confirm,
    I am seeing: 1.12 GB (1,213,677,648 bytes) with 155 Files
    zmsox likes this.
    03-19-14 04:01 PM
  10. Paul Ogorzow's Avatar
    Progress stuck at sending retaildemoshim 0% for about 10min now. :|
    03-19-14 04:08 PM
  11. PDM's Avatar
    Progress stuck at sending retaildemoshim 0% for about 10min now. :|
    As if that file is required...
    03-19-14 04:21 PM
  12. Paul Ogorzow's Avatar
    May not be required but i don't want to suspend progress.
    03-19-14 04:31 PM
  13. heading4tomorrow's Avatar
    May not be required but i don't want to suspend progress.
    Are you still stuck? I had similar problem before I stopped it because it was at %0. It happened a few times until I closed and moved the files to a different folder or renamed the folder and retried then it worked.
    03-19-14 04:35 PM
  14. Clont Iulian's Avatar
    I just update to Mega the entire folder which you need to use with Sachesi. Just 7zip-ed and then drag the folder to Sachesi. Works for me perfectly.

    https://mega.co.nz/#!pYQFkKTK!_kCB9n...NWQoAKMAFav6kI


    Posted via CB10
    zmsox likes this.
    03-19-14 04:44 PM
  15. moosbb's Avatar
    Installed via Sachesi, worked and setled quite nicely here.

    But I now get the "Joyn" thing and I can't find where to remove/uninstall it.
    Does someone know how to please?
    03-19-14 04:46 PM
  16. zmsox's Avatar
    thanks man
    is that for the z10?

    I just update to Mega the entire folder which you need to use with Sachesi. Just 7zip-ed and then drag the folder to Sachesi. Works for me perfectly.

    https://mega.co.nz/#!pYQFkKTK!_kCB9n...NWQoAKMAFav6kI


    Posted via CB10
    03-19-14 04:46 PM
  17. Clont Iulian's Avatar
    thanks man
    is that for the z10?
    Yes. It is for Z10 stl 100-2

    Posted via CB10
    zmsox likes this.
    03-19-14 04:49 PM
  18. zmsox's Avatar
    many thanks for that, it worked perfect for me

    Yes. It is for Z10 stl 100-2

    Posted via CB10
    03-19-14 05:10 PM
  19. lcgoldman's Avatar
    I just update to Mega the entire folder which you need to use with Sachesi. Just 7zip-ed and then drag the folder to Sachesi. Works for me perfectly.

    https://mega.co.nz/#!pYQFkKTK!_kCB9n...NWQoAKMAFav6kI


    Posted via CB10
    Thank you for posting and sharing... I just downloaded and unzipped... I see that there are 10 .bar files which I moved in to a folder for easy updating through Sachesi.

    I am currently on 10.2.1.2156 (OS 10.2.1.2228) and I have a Z10 STL 100-3. I just want to confirm that those are the right .bar files and all I have to do is load that folder to get the new version.

    Thanks in advance!
    Last edited by lcgoldman; 03-19-14 at 05:47 PM.
    03-19-14 05:36 PM
  20. Fret Madden's Avatar
    I don't think that there's actually a big issue. My best guess is that it's because AT&T hasn't updated past 10.1. I never had an issue before 10.2. Hopefully when(if?) they release 10.2.1 it will work again.

    Posted via CB10
    On Verizon STL100-4, and from the moment I activated it has never allowed me to save the VM password. Scant information to be found about it to boot. The 10.2.1 builds don't even have an option (see below). I guess after nearly a year that's just the way the cookie crumbles.


    MyToobsAreLeaking presents 10.2.1.2234 for all devices-img_20140319_170224.png

    Posted via CB10
    03-19-14 06:02 PM
  21. red72's Avatar
    Help if you could please? I followed instructions and twice it stopped installing at 22% while installing "card". i have a VZW Z10 STL100-4, and am currently running .2228. Thanks
    03-19-14 06:06 PM
  22. Al moon's Avatar
    Thank you for posting and sharing... I just downloaded and unzipped... I see that there are 10 .bar files which I moved in to a folder for easy updating through Sachesi.

    I am currently on 10.2.1.2156 (OS 10.2.1.2228) and I have a Z10 STL 100-3. I just want to confirm that those are the right .bar files and all I have to do is load that folder to get the new version.

    Thanks in advance!
    my download only shows 5 files ??
    03-19-14 06:11 PM
  23. Paul Ogorzow's Avatar
    Are you still stuck? I had similar problem before I stopped it because it was at %0. It happened a few times until I closed and moved the files to a different folder or renamed the folder and retried then it worked.
    Long story short: my phone disconnected whilst progress. So I had to restart Sachesi, this time it upgraded without problems.
    03-19-14 06:18 PM
  24. lawguyman's Avatar
    Z30 Sta100-5 on T mobile USA.
    MyToobsAreLeaking presents 10.2.1.2234 for all devices-img_20140319_182041.png

    Posted via CB10
    yvpan1 likes this.
    03-19-14 06:24 PM
  25. ItNeverTooLate's Avatar
    This comes out of the box with Wifi calling.. I get a notice and when I click on it nothing nothing happens or takes me back to wifi scan area.
    It is suppose to take you to the place where you make a preference selection... other than that seems to be working fine.
    03-19-14 06:27 PM
563 ... 1213141516 ...

Similar Threads

  1. Set Default App to Launch if Bluetooth Connected?
    By Tornado99 in forum BlackBerry Z10
    Replies: 7
    Last Post: 07-02-14, 04:13 PM
  2. Replies: 22
    Last Post: 03-26-14, 02:31 AM
  3. Updated Kindle app for Playbook
    By cobra boy in forum BlackBerry PlayBook
    Replies: 2
    Last Post: 03-20-14, 10:47 PM
  4. Verizon has finally rolled out the 10.2 for q10!
    By BennieBR in forum General BlackBerry Discussion
    Replies: 1
    Last Post: 03-18-14, 04:50 PM
  5. My 10.1.2.xxxx from Verizon is scaring me
    By Lee Eshelman in forum BlackBerry Z30
    Replies: 5
    Last Post: 03-18-14, 04:47 PM
LINK TO POST COPIED TO CLIPBOARD