05-03-14 07:25 PM
1,399 ... 7891011 ...
tools
  1. thurask's Avatar
    7 posts up is a mega link to aZ30 autoloader. Thurask posted the production server links a few pages back.i didn't check if it was debrick or upgrade bar.
    Debrick. Upgrade is just removing any mention of ".desktop" from the URL, anyway.

    Posted via CB10
    toobs623 likes this.
    02-14-14 01:42 PM
  2. edisonrfilho's Avatar
    Can I use this for my STL 100-3?
    I think so, just make sure you update the "Variant" field to STL 100-3
    02-14-14 01:43 PM
  3. Camelhmpz's Avatar
    The Z10 file is only coming up as a 28Mb for me, anyone else?
    02-14-14 01:43 PM
  4. thurask's Avatar
    I think so, just make sure you update the "Variant" field to STL 100-3
    Actually, STL100-2 and STL100-3 are 100% identical, software wise.

    Posted via CB10
    02-14-14 01:44 PM
  5. thurask's Avatar
    The Z10 file is only coming up as a 28Mb for me, anyone else?
    It's just the radio, I think.

    Posted via CB10
    02-14-14 01:44 PM
  6. cchilderhose's Avatar
    Trying this right now. Will report back in a bit.
    Cool. Did you just download the 2 files from the links or use Sachesi to download all files?
    02-14-14 01:45 PM
  7. Camelhmpz's Avatar
    It's just the radio, I think.

    Posted via CB10
    Ya I think I see this now. So I can use the Z30 autoloader then add this radio for my Verizon Z10 afterwards right?
    02-14-14 01:46 PM
  8. lengend's Avatar
    02-14-14 01:48 PM
  9. thurask's Avatar
    Ya I think I see this now. So I can use the Z30 autoloader then add this radio for my Verizon Z10 afterwards right?
    If it's a radio autoloader (can't check now), then you can run the radio autoloader after the Z30 autoloader (which should boot with a "invalid radio" error, of course).

    Or, you could split the Z30 autoloader and radio autoloader, chuck the Z30 radio and make an autoloader out of the remaining signed files.

    Posted via CB10
    anon721037 and Azensun like this.
    02-14-14 01:49 PM
  10. akawarrior's Avatar
    The z10 MEGA link is only 28 megs download??
    Bad upload I think or not complete yet..

    akawarrior..

    EDIT: Brain Poot.. Radio file.. Dang.. Sorry..
    kmbz10 likes this.
    02-14-14 01:50 PM
  11. Atmarix's Avatar
    02-14-14 01:50 PM
  12. tickerguy's Avatar
    That's just the radio.
    02-14-14 01:50 PM
  13. thurask's Avatar
    The z10 MEGA link is only 28 megs download??
    Bad upload I think or not complete yet..

    akawarrior..
    It's just a radio. That 28MB is a lot easier to upload than another 2GB of OS/radio autoloader.

    Posted via CB10
    02-14-14 01:51 PM
  14. red72's Avatar
    It's just a radio. That 28MB is a lot easier to upload than another 2GB of OS/radio autoloader.

    Posted via CB10
    So I take it then we are supposed to download the Z30 OS and flash with our respective radio file?
    02-14-14 01:52 PM
  15. tinochiko's Avatar
    Doing all that and binge-watching House of Cards?

    Posted via CB10
    Loool im actually doing this

    TechCraze C0008DDD1
    thurask and toobs623 like this.
    02-14-14 01:53 PM
  16. thurask's Avatar
    So I take it then we are supposed to download the Z30 OS and flash with our respective radio file?
    Or make your own autoloader, yeah.

    Posted via CB10
    NinjaB and red72 like this.
    02-14-14 01:54 PM
  17. edisonrfilho's Avatar
    Actually, STL100-2 and STL100-3 are 100% identical, software wise.

    Posted via CB10
    Oh, thank you. I wasn't sure, so I thought it would be better recommending changing that field. :-)
    02-14-14 01:56 PM
  18. MobileMadness002's Avatar
    Thank you very much.
    02-14-14 01:57 PM
  19. kfroese's Avatar
    I'm going to try do this non-destructively via Sachesi since I don't have time today to full wipe and autoloader and set everything up again. To make sure I do this correctly:
    -No link backup (Takes too long to do and almost always screws something up); just manual backup of important stuff
    -"Download All" in "Upgrade" mode for SQN100-3 (Codes 268/1) which I recall will also work on SQN100-1
    -Use "Install" tab to dump the .bar files from step above onto phone
    -Reboot
    -Flash radio if for some reason it didn't work

    Sound good? I haven't done non-destructive before.
    02-14-14 01:58 PM
  20. thurask's Avatar
    I'm going to try do this non-destructively via Sachesi since I don't have time today to full wipe and autoloader and set everything up again. To make sure I do this correctly:
    -No link backup (Takes too long to do and almost always screws something up); just manual backup of important stuff
    -"Download All" in "Upgrade" mode for SQN100-3 (Codes 268/1) which I recall will also work on SQN100-1
    -Use "Install" tab to dump the .bar files from step above onto phone
    -Reboot
    -Flash radio if for some reason it didn't work

    Sound good? I haven't done non-destructive before.
    Looks good.

    Posted via CB10
    yellowhammer and kfroese like this.
    02-14-14 02:01 PM
  21. tw820's Avatar
    is this for z10 or q10?
    02-14-14 02:03 PM
  22. MobileMadness002's Avatar
    I'm going to try do this non-destructively via Sachesi since I don't have time today to full wipe and autoloader and set everything up again. To make sure I do this correctly:
    -No link backup (Takes too long to do and almost always screws something up); just manual backup of important stuff
    -"Download All" in "Upgrade" mode for SQN100-3 (Codes 268/1) which I recall will also work on SQN100-1
    -Use "Install" tab to dump the .bar files from step above onto phone
    -Reboot
    -Flash radio if for some reason it didn't work

    Sound good? I haven't done non-destructive before.

    FWIW, I downloaded qc8960.factory_sfi.desktop-10.2.1.2141-nto+armle-v7+signed.bar and qc8960-10.2.1.2142-nto+armle-v7+signed.bar and loaded each of these 2 using Sachesi. Same result I would imagine.
    02-14-14 02:03 PM
  23. thurask's Avatar
    is this for z10 or q10?
    All devices, if you do it right.

    Posted via CB10
    02-14-14 02:08 PM
  24. dustmalik's Avatar
    I see those on OS 10.2.1.1925 are getting 38mb or so OTA update to 10.2.1.2141. So I'm thinking if 10.2.1.2141 contains an updated android runtime, then why is the update file so small? Considering an android runtime file is usually as big as 80mb to 90mb.

    Posted via CB10 using my Gorgeous Z10
    02-14-14 02:08 PM
  25. yellowhammer's Avatar
    I'm going to try do this non-destructively via Sachesi since I don't have time today to full wipe and autoloader and set everything up again. To make sure I do this correctly:
    -No link backup (Takes too long to do and almost always screws something up); just manual backup of important stuff
    -"Download All" in "Upgrade" mode for SQN100-3 (Codes 268/1) which I recall will also work on SQN100-1
    -Use "Install" tab to dump the .bar files from step above onto phone
    -Reboot
    -Flash radio if for some reason it didn't work

    Sound good? I haven't done non-destructive before.
    Should Android apps be deleted first and then reinstalled after the update?
    02-14-14 02:08 PM
1,399 ... 7891011 ...

Similar Threads

  1. Replies: 49
    Last Post: 03-24-14, 11:57 PM
  2. When will 10.2.1 be pushed by T-Mobile USA??
    By yanco in forum BlackBerry 10 OS
    Replies: 30
    Last Post: 03-17-14, 10:27 AM
  3. 10.2.1.2102 Update for Z30 (OS 10.2.1.2141)
    By heading4tomorrow in forum BlackBerry Z30
    Replies: 29
    Last Post: 02-24-14, 01:41 PM
  4. Heads Up: If you're using an old BlackBerry 10 OS leak, the new BBM 10.3 will not work
    By CrackBerry News in forum CrackBerry.com News Discussion
    Replies: 0
    Last Post: 02-14-14, 04:20 PM
  5. Well done BlackBerry!
    By Paul Collins4 in forum General BlackBerry Discussion
    Replies: 2
    Last Post: 02-14-14, 04:11 PM
LINK TO POST COPIED TO CLIPBOARD