05-03-14 06:25 PM
1,399 ... 1920212223 ...
tools
  1. sbx9900's Avatar
    Since the files pointed out by Thurask to be downloaded are bar files, can i install them using DDPB like sideloading other bar files instead of using Sachesi?

    Also, I have the Q10. Using Sachesi, i can search for the the OS using country code 234, Carrier 015, Q10 and SQN 100-3. Once found, download it and install after backing up.

    Which is simpler and easier?

    Thanks.
    02-14-14 10:23 PM
  2. jhimmel's Avatar
    Does it show the new software release in About screen or is it still on .537?
    Shows correct new versions.

    Posted via CB10
    Attachment 247967
    02-14-14 10:25 PM
  3. anon721037's Avatar
    Anyone else have problems setting wallpaper? The screen darkens like usual before the photo editor pops up, but nothing actually happens.

    Posted via CB10

    Never mind, fixed it. Had to hit the Edit button, then the editor popped up, and now Set As works.
    No mine is working proper.


    Posted from my Z30
    02-14-14 10:29 PM
  4. torcheredsole56's Avatar
    Glad to hear this, as funny as it sounds, that would have been a deal breaker for me. That annoyed me all to hell with that one build. :-)
    02-14-14 10:30 PM
  5. serum67's Avatar
    Is anyone else having sensor issues? My screen never blacks on calls, so I always end up pressing mute with my cheek. Am I the only one? When I went back to 10.1, the sensors work perfect. I am on a z10 STL100-3 with this leak installed. Same went for 10.2.1.1925

    BB Virtual Expert says the sensors pass all tests...
    Last edited by serum67; 02-14-14 at 10:42 PM.
    02-14-14 10:31 PM
  6. Omnitech's Avatar
    Any change log for this version?

    I am building one here:

    http://forums.crackberry.com/bb10-le...veries-905611/
    geekaren likes this.
    02-14-14 10:36 PM
  7. Overlake's Avatar
    will try it again
    02-14-14 10:41 PM
  8. Omnitech's Avatar
    i think this autoloader process bricked my phone. stuck at software update "checking for updates". can't stand these one-offs man.

    Stuck on "checking for updates" does not mean the device is bricked.

    If the user interface isn't responding for quite some time (ie 15 minutes), just restart the device.

    Hold both volume buttons down for about 10 seconds until the screen turns black, the device will restart.
    02-14-14 10:43 PM
  9. Kat0908's Avatar
    Ok, so what will be the easiest way for me to get the full OS on my device? I was going to go the Sachesi route and just drag and drop the 2 files found in an earlier post but now I'm reading that that isn't the full OS? Would it be better/easier if I went the autoloader route? Is there anyway to get the full OS on my device using Sachesi without having to sideload all of the app bar files? Thanks for everyone's insight so far!
    02-14-14 10:47 PM
  10. emmanskie88's Avatar
    Extract the signed file from the bar file (it's just a zip, anyway).
    Hi,

    I'm having the same prob.. loaded all the bars thru sachesi but the SW release ans radio remains the same.

    Just want to ask how can I extract the signed file from the bar file of the radio as I'm trying to create a Radio Autoloader.
    02-14-14 10:51 PM
  11. KenV54's Avatar
    Yes, you can extract the necessary BAR files from the autoloader, or from the debrick signed file, using Sachesi's "Extract" function.

    First you extract the large OS .signed file from the Autoloader, then you run Sachesi again to extract all the BAR files from the .signed OS file. Then pick the ones you need from the list of updated BARs that toobs623 posted and I re-posted.

    Bear in mind that list is just a differential from 10.2.1.1925. If you had a different OS on the device previously, or if some of the apps were not stock 10.2.1.1925 files (ie the Porsche clock, or a different camera app BAR), then you need to take that into account.

    Sideload all the new BAR files, then restart the device.
    Thanks! I just did all that--never would have known about the apps without your posts. So, why doesn't a nondestructive upgrade load in all the new apps, since they are obtained in the signed files? Is that true for actual OTA upgrades, too, not just with Sachesi? If so, how does any typical end user ever get the new apps with the OTA upgrades? Most non-Crackberry people don't do autoloads.
    02-14-14 10:53 PM
  12. zack west's Avatar
    Used autoloader and have no problems, other than wifi calling not working. Why so many issues with sideloading?

    Q10SQN100-5/10.2.1.1259
    02-14-14 10:54 PM
  13. Kat0908's Avatar
    Just the Core OS and radio, which is not a complete update. See answer below.

    I installed all the 154 bars (downloaded directly from Blackberry servers) the hard way.. didn't have a list of updated BARs yet and wanted to make sure everything was updated.

    Very timeconsuming to do that but slightly more predictable.







    [Updated]
    If you update with only the debrick OS file and radio file, you will not update the OS completely. You also need to load the updated non-core bundled apps, using the newer BAR files. About 25 of those have changed since 10.2.1.1925.

    So you can either load all 152 of those, or just the updated ones. Here are the base OS and radio file links posted by thurask, see below for the updated BAR file list:




    Here's the list of which of the above to use to upgrade your device, minus the updated BAR files (see below):




    And here is the list of updated BAR files over 10.2.1.1925, posted by toobs623. (If your currently-installed OS is earlier than 10.2.1.1925, then you need to either load ALL the 10.2.1.2141 BAR files, or figure out which ones have changed from the OS you currently have installed):
    How do I find and download the other 152 BAR files?
    02-14-14 11:04 PM
  14. freedomx20a's Avatar
    any working links for q10 autoloader?

    saschei bricked my q
    02-14-14 11:10 PM
  15. thurask's Avatar
    How do I find and download the other 152 BAR files?
    Extract them from the debrick OS bar file with Sachesi.
    02-14-14 11:11 PM
  16. Kat0908's Avatar
    Extract them from the debrick OS bar file with Sachesi.
    The debrick OS file is what I downloaded from the link on post #329 right? If so, when I go into Sachesi and hit extract and the file browser window pops up, it doesn't see that file.
    02-14-14 11:13 PM
  17. anon721037's Avatar
    any working links for q10 autoloader?

    saschei bricked my q
    Did you look in the first post made by op


    Posted from my Z30
    02-14-14 11:13 PM
  18. thurask's Avatar
    Hi,

    I'm having the same prob.. loaded all the bars thru sachesi but the SW release ans radio remains the same.

    Just want to ask how can I extract the signed file from the bar file of the radio as I'm trying to create a Radio Autoloader.
    Evidently, radio autoloaders cause bricking when applied to OTA/Sachesi installed OSs. I'd stay away, or make an OS/radio autoloader.
    NinjaB likes this.
    02-14-14 11:13 PM
  19. freedomx20a's Avatar
    ya mega says error
    02-14-14 11:14 PM
  20. emmanskie88's Avatar
    Evidently, radio autoloaders cause bricking when applied to OTA/Sachesi installed OSs. I'd stay away, or make an OS/radio autoloader.
    Then there's no way I can load the signed radio bar file

    i'm getting an error.. "failed 500"
    02-14-14 11:15 PM
  21. anon721037's Avatar
    ya mega says error
    Just tried , works for me, try clearing your cache and maybe restart your PC.


    Posted from my Z30
    02-14-14 11:16 PM
  22. thurask's Avatar
    The debrick OS file is what I downloaded from the link on post #329 right? If so, when I go into Sachesi and hit extract and the file browser window pops up, it doesn't see that file.
    Use Split first to split the large bar file into a .signed file. Then use the Extract Apps button.
    Kat0908 likes this.
    02-14-14 11:20 PM
  23. torcheredsole56's Avatar
    FWIW, I just did the autoloader. Disregard previous questions. I will piece it all together once I'm not tired+beer. Or is that beer+tired? Thanks again.

    Posted via CB10
    02-14-14 11:20 PM
  24. sbx9900's Avatar
    I sideloaded the 2 bar files for Q10 via DDPB. nothing seems to have changed. still on SW .537 and .1925 with .1926 radio....
    02-14-14 11:20 PM
  25. ralfyguy's Avatar
    Use Split first to split the large bar file into a .signed file. Then use the Extract Apps button.
    Isn't it the same as to select "Upgrade" on Sachesi and install the 154 files?
    02-14-14 11:22 PM
1,399 ... 1920212223 ...

Similar Threads

  1. Replies: 49
    Last Post: 03-24-14, 10:57 PM
  2. When will 10.2.1 be pushed by T-Mobile USA??
    By yanco in forum BlackBerry 10 OS
    Replies: 30
    Last Post: 03-17-14, 09:27 AM
  3. 10.2.1.2102 Update for Z30 (OS 10.2.1.2141)
    By heading4tomorrow in forum BlackBerry Z30
    Replies: 29
    Last Post: 02-24-14, 12:41 PM
  4. Heads Up: If you're using an old BlackBerry 10 OS leak, the new BBM 10.3 will not work
    By CrackBerry News in forum CrackBerry.com News Discussion
    Replies: 0
    Last Post: 02-14-14, 03:20 PM
  5. Well done BlackBerry!
    By Paul Collins4 in forum General BlackBerry Discussion
    Replies: 2
    Last Post: 02-14-14, 03:11 PM
LINK TO POST COPIED TO CLIPBOARD