1. slagman5's Avatar
    I'm about to install this leak. but i have one question, what's 1926 Radio? and how dose that work? I'm using the Auto loader.
    I think a very simplistic way to explain it (because I'm not a real expert at this) is the radio is the part of the OS that handles the incoming and outgoing transmissions, like for data, phone calling, etc. I think if you want the 1926 radio, you should load the 1925 leak, then after that, load the 1926 radio the same way (also on an autoloader).
    01-16-14 12:40 AM
  2. Dollar Vora's Avatar
    Which radio would work the best in terms of network bars and battery , on the z10 stl 100-3 ?
    01-16-14 12:48 AM
  3. michaelrb88's Avatar
    Which radio would work the best in terms of network bars and battery , on the z10 stl 100-3 ?
    I have ran both. I was on 1899 for 2 weeks and it was fine as far as I could tell. When I downloaded 1926, battery life dropped, however my service level increased. I stuck with it and after a week, battery life is much better. Seems like it was a long time settling down. I prefer 1926, but it seems to vary from device to device.

    I did download the Verizon specific radio, so I'm not sure my experience will be on par with other carriers. I'd say try both in 2 week intervals and judge your own experience.

    STL100-4, .1925 OS, .1926 radio
    jakie55 likes this.
    01-16-14 01:00 AM
  4. Dollar Vora's Avatar
    I installed the 1926 radio yesterday and it seems to be indexing my contacts and other data pretty fast as compared to 1899;

    doesn't seem to be a "remarkable" difference in the battery though.

    Z10 STL100-3 OS-1925/1926 Radio
    01-16-14 01:42 AM
  5. CallMeEric's Avatar
    I'm also on AT&T with the Z10 STL 100-3 and 10.2.1.1925 works awesome! The only issue I've run into is the Blackberry World Facebook App (will not open). So I can't get push notifications. I just use the web version. I used SNAP to download apps and they seem to work great. Netflix, Instagram, Pinterest are examples and all work well. Hope you enjoy, its like having a new phone.
    Thanks D! Probably going to update to this version this weekend when I have free time. What's Snap btw? Is that necessary to run Android apps?

    Posted via CB10
    01-16-14 01:55 AM
  6. michaelrb88's Avatar
    Not necessary but allows direct apk downloads. Search it. It's a great app for getting android apps.

    STL100-4, .1925 OS, .1926 radio
    01-16-14 02:09 AM
  7. BeeRanDyn's Avatar
    I'm trying to download the autoloader for my Z10 stl100-3 but once it's finished downloading from mega, and I click to run the file, my computer tells me to pick a program to run the file or search the Internet for a program. I've downloaded 10.2.0.1803 onto my z10 without this problem. Can anyone tell me if I'm doing something wrong?

    Posted via CB10
    01-16-14 03:04 AM
  8. michaelrb88's Avatar
    I'm trying to download the autoloader for my Z10 stl100-3 but once it's finished downloading from mega, and I click to run the file, my computer tells me to pick a program to run the file or search the Internet for a program. I've downloaded 10.2.0.1803 onto my z10 without this problem. Can anyone tell me if I'm doing something wrong?

    Posted via CB10
    You need 7zip, win zip, or winrar to extract the .exe file from the autoloader. Same thing happened to me. 1055 downloaded already unzipped, but 1925 didn't.


    STL100-4, .1925 OS, .1926 radio
    01-16-14 03:21 AM
  9. michaelrb88's Avatar
    The loader file was compressed using either 7zip or RAR. Windows does not have a builtin app to unzip those. Please take a look at these leak install instruction I wrote where I explain that.
    Beat me to it. You have a better answer anyway, lol.

    STL100-4, .1925 OS, .1926 radio
    jrohland likes this.
    01-16-14 03:22 AM
  10. techtechnique's Avatar
    I will be making phone calls to everyone using one-button homescreen speed dialing
    Could you please explain how to do this?
    I've searched till boredom and frustration have made me ask you! The only way I can find is by installing a Speed Dial app, but I'm hoping your way is native, without the need for yet another bit of software taking up valuable memory.
    01-16-14 07:51 AM
  11. kfroese's Avatar
    Could you please explain how to do this?
    I've searched till boredom and frustration have made me ask you! The only way I can find is by installing a Speed Dial app, but I'm hoping your way is native, without the need for yet another bit of software taking up valuable memory.
    With a Q (not sure about Z), you can push and hold a key to do speed dial. First time you do this with a key, you'll be prompted to assigned a number to it.

    Q10SQN100-1/10.2.1.1925
    01-16-14 08:02 AM
  12. PaulyDoyle's Avatar
    BBM BETA 10.3 WORKS WITH THIS BUILD


    Older clock bar from 1259 OS to get porsche design clock back with "fostah" backdoor.

    Credits go to DarcyTallGuy for finding the backdoor.
    Credits to Sirjes for the bar and upload
    https://mega.co.nz/#!3thAwJQZ!du2g_n...C0cA6u3cLDNObs

    Q5/10 1899 Radio ONLY (reflash if you installed with 1260 radio)
    https://mega.co.nz/#!RNskjTpQ!RRwk0B...rjAsqYU7Z31nbM

    Z30 10.2.1.1925/1899 radio
    https://mega.co.nz/#!FIMkBBJQ!TsPnWn...HHkG4U_WYkzO4U

    Z10 2/3/4 10.2.1.1925/1899 radio
    https://mega.co.nz/#!4VkkhLzT!JR1ken...5YBaRb3acRNRM4

    STL100-1 10.2.1.1925/1899 radio
    https://mega.co.nz/#!RZ1EVBSb!foUkuh...rLLCHi6b6F-QS8

    Q5/10 10.2.1.1925 with 10.2.1.1899 radio
    https://mega.co.nz/#!w5NnEBDI!evmoT2...dWQG2D40DXctFc

    Z30 10.2.1.1925 (download torrent) - TPB

    STL100-1 OS 10.2.1.1925 (download torrent) - TPB

    mirrors by Thurask
    Bitcasa mirrors:

    Q10
    STL100-1
    STL100-2/3/4
    Z30

    Mirrors by tezytan
    Z10 STL-1
    FileFactory
    Z10 STl2-3-4
    Autoloader.Z10.STL100-234.OS.10.2.1.1925.SW.537.7z - FileFactory
    Z30
    FileFactory

    Posted via CB10
    Hey guys,

    *Noob alert*! Which of these downloads should I use for my AT&T Q10?

    I need a few pointers as well, the instructions seem fairly simple, but a little extra help doesn't hurt..
    01-16-14 08:25 AM
  13. Atlergambit's Avatar
    Perhaps I did something amiss, don't know, but loaded this on my Q10 late last week only to find that I could not make any phone calls. I could dial it up, but soon as I pressed the call button, the screen would dim down like it normally does when switching over to the call status screen but then a couple seconds later would just light back up and not make the call.

    I already flashed back to official release from Rogers, but I'd like to possibly move up again to this leak if possible.

    Any thoughts would be appreciated.
    01-16-14 08:43 AM
  14. John Clark's Avatar
    You probably downloaded a copy without a radio file. Just install a radio file and you should be good. The first post really should be cleaned up with links to full autoloaders for the 1925 OS with the proper 1926 Radio file. This OS was initially leaked with the radio file from 1899. Then later someone leaked the 1926 radio file that goes with it but it's in another thread. I thought they had created new autoloaders with the new radio and posted them here in the first post but I guess not.
    01-16-14 08:55 AM
  15. Atlergambit's Avatar
    You probably downloaded a copy without a radio file. Just install a radio file and you should be good. The first post really should be cleaned up with links to full autoloaders for the 1925 OS with the proper 1926 Radio file. This OS was initially leaked with the radio file from 1899. Then later someone leaked the 1926 radio file that goes with it but it's in another thread. I thought they had created new autoloaders with the new radio and posted them here in the first post but I guess not.
    Awesome, thank you sir. I'll have to find the right radio file then and maybe i'll do this again this afternoon, see what happens.
    01-16-14 09:26 AM
  16. mzeyrek's Avatar
    I've downloaded STL100-1 version as i've read under my Z10 about/hardware section however recieved incompatible error. Downloading 2-3-4 version now. Any others faced same issue ? currently running on 10.2.0.429
    01-16-14 02:32 PM
  17. Pdinos3's Avatar
    I've downloaded STL100-1 version as i've read under my Z10 about/hardware section however recieved incompatible error. Downloading 2-3-4 version now. Any others faced same issue ? currently running on 10.2.0.429
    If your about screen says stl100-1, then only the file for 100-1 will work. Try a mirror link just below the OP and see if it works. If the error you get on the actual phone is something like bb-10004 error, it needs to have the correct radio flashed.


    Via CB10 Rogers Z30STA100-5/10.2.1.1925/1926 Radio
    01-16-14 02:41 PM
  18. BVB65's Avatar
    I recently have gone to the Blackberry protect website. When I signed in, I could view my phone and my wife's phone on the My Device screen. My phone indicates the Blackberry Protect option is OFF next to the battery icon and my wife's phone doesn't show OFF. My phone has the 10.2.1.1925 leak and my wife's phone has the official 10.1.0.2151. Has this anything to do with that? Although,on the manage my device screen both phones show up as active. When I turned on Blackberry Protect on my wife's phone, she received a notification that Blackberry Protect was enabled and active. My phone, no such notification appeared.
    01-16-14 03:14 PM
  19. John Clark's Avatar
    Mine is working OK. I'm on 1925 and my wife is on 1055 (she doesn't like to give up her phone long enough for me to update it.)
    01-16-14 03:23 PM
  20. juliankueh's Avatar
    Could you please explain how to do this?
    I've searched till boredom and frustration have made me ask you! The only way I can find is by installing a Speed Dial app, but I'm hoping your way is native, without the need for yet another bit of software taking up valuable memory.
    With a Z, go to your phone icon, swipe down from top of the screen, tap settings and select Key press Speed Dial. Press and hold a slot and add the contact from there.
    jaydee5799 and Theilio like this.
    01-16-14 04:58 PM
  21. jaydee5799's Avatar
    With a Z, go to your phone icon, swipe down from top of the screen, tap settings and select Key press Speed Dial. Press and hold a slot and add the contact from there.
    Super! Never saw this before!!!
    Doing the happy dance! Thanks!
    01-16-14 05:10 PM
  22. juliankueh's Avatar
    Super! Never saw this before!!!
    Doing the happy dance! Thanks!
    My pleasure ;-)
    01-16-14 05:51 PM
  23. bibbula's Avatar
    I did download the Verizon specific radio...
    Wait, there are Verizon specific radios? Are there Verizon specific radios for other phones as well? Would totally give a Verizon specific Q10 radio a try if it existed.
    01-16-14 06:02 PM
  24. tonytraj17's Avatar
    If it wouldnt be too much of a pain, can someone provide me a link to a 1899 radio for z30. I have the signed bars but cant for some reason make an autoloader -.-
    01-16-14 09:27 PM
  25. Pdinos3's Avatar
    If it wouldnt be too much of a pain, can someone provide me a link to a 1899 radio for z30. I have the signed bars but cant for some reason make an autoloader -.-
    Hope this is it.

    https://mega.co.nz/#!NQoV3Q7T!aG3aN1...ws92_AcjjrRPg0

    I'm pretty sure it is


    Via CB10 Rogers Z30STA100-5/10.2.1.1925/1926 Radio
    cdnrower likes this.
    01-16-14 09:41 PM
2,959 ... 103104105106107 ...

Similar Threads

  1. aplk install limit on q10 running 10.2.1.1055
    By toosweetnitemare in forum BlackBerry 10 OS
    Replies: 3
    Last Post: 12-27-13, 09:52 AM
  2. What's new with 10.2.1.1925?
    By khehl in forum BB10 Leaked/Beta OS
    Replies: 130
    Last Post: 12-24-13, 01:23 PM
  3. BBM beta and 10.2.1.1925
    By harryhayde in forum BB10 Leaked/Beta OS
    Replies: 1
    Last Post: 12-23-13, 08:19 PM
  4. When will 10.2.1 update release for UK?
    By alfahama in forum BlackBerry 10 OS
    Replies: 2
    Last Post: 12-23-13, 07:12 PM
LINK TO POST COPIED TO CLIPBOARD