07-27-13 03:59 AM
517 ... 1415161718 ...
tools
  1. Wigley458's Avatar
    I would take Wigley458's advice and run the autoloader again. I have not had a random reboot either.

    This build does need a couple of days to settle in, and you may experience some strange things at first. But, it does seem to work itself out. Contrary to a lot of threads saying you don't need to do battery pulls, I still swear by them. It is the only way you can completely shut down power to the device. I pull the battery on my laptop about once a month.


    Posted via CB10
    Here's a little trick u might not know. If u hold both the up and down volume keys together. And hold them till phone turns off then reboots. This is actually the beat way to reboot the bb10. As it does a full and proper boot. Including turning completely off. Just for ur info. A much better way to do bit then pulling the battery. This is how devs do it. As it preserves things and resets better and more complete

    Z10STL100-3/10.2.0.93 & Posted from my awesome Z10 via cb10. My Channel pin http://channelpin.com/C000B3B57
    06-25-13 12:36 AM
  2. Talon151's Avatar
    I didn't have any reboots when I was on 10.1.0. 2354. That one worked flawlessly on my STL100-04
    Same deal with me. Super on .2354. Loaded 10.2.0.93 (on Z10STL100-2) a few days ago and all seemed fine, however have just started to notice some random reboots. Have reset using holding up/down buttons method.
    Will see how we go.
    06-25-13 03:45 AM
  3. kaizvn's Avatar
    now I really hate my STL-1 -_-'.....
    kndL likes this.
    06-25-13 07:03 AM
  4. ralphbu's Avatar
    HERE IS WHAT i NOTICED, AT 10.2 (BOTH .228 AND .93) MY STL 002 DEVICE STARTED FLASHING THIS NOTICE: TO CHARGE YOUR DEVICE FASTER USE THE CHARGER THAT CAME WITH THIS DEVICE. RECHARGING BECAME UNUSUALLY SLOW AND DRAINING CAME VERY FAST. AT. 10.2.X.93 MY DEVICE BECAME TOO WARM TO HANDLE. WHILE 10.2 GAVE ME A WONDERFUL Z10 EXPERIENCE, I HAVE NO CHOICE BUT GO BACK TO 10.1. I DONT KNOW IF SOME OF YOU HAVE A SIMILAR ISSUE. I WOULD LIKE TO KNOW HOW YOU WERE ABLE TO GO AROUND IT, IF THERE WERE TWEAKS DONE.
    06-25-13 07:25 AM
  5. Wigley458's Avatar
    HERE IS WHAT i NOTICED, AT 10.2 (BOTH .228 AND .93) MY STL 002 DEVICE STARTED FLASHING THIS NOTICE: TO CHARGE YOUR DEVICE FASTER USE THE CHARGER THAT CAME WITH THIS DEVICE. RECHARGING BECAME UNUSUALLY SLOW AND DRAINING CAME VERY FAST. AT. 10.2.X.93 MY DEVICE BECAME TOO WARM TO HANDLE. WHILE 10.2 GAVE ME A WONDERFUL Z10 EXPERIENCE, I HAVE NO CHOICE BUT GO BACK TO 10.1. I DONT KNOW IF SOME OF YOU HAVE A SIMILAR ISSUE. I WOULD LIKE TO KNOW HOW YOU WERE ABLE TO GO AROUND IT, IF THERE WERE TWEAKS DONE.
    WHY ARE YOU YELLING !

    Anyway. Yes there notices about using a proper cord. Which actually is good message. As it's been known for a long time now that older cords don't charge as well. And have issues sometimes.

    As to ur other stuff. I'd suggest a wipe and reload

    Z10STL100-3/10.2.0.93 & Posted from my awesome Z10 via cb10. My Channel pin http://channelpin.com/C000B3B57
    06-25-13 08:02 AM
  6. ARWestenberger's Avatar
    Same deal with me. Super on .2354. Loaded 10.2.0.93 (on Z10STL100-2) a few days ago and all seemed fine, however have just started to notice some random reboots. Have reset using holding up/down buttons method.
    Will see how we go.
    I only get the reboots right before I wake up it feels like. Just tried this method as well, so we shall see how it goes. Maybe there is a glitch when the battery gets fully charged and it reboots? I have noticed it will charge to 100% again, which it wouldn't do on 2354.

    Posted via CB10
    06-25-13 08:18 AM
  7. gpompeus's Avatar
    For me this Leak has been the best of all the 10.2 leaks/ combinations with other Full OS's...

    Yes it takes time to charge but once it's fully charged the battery lasts for longer than other leaks...

    Posted vis CB10 on Q10SQN100-3/10.1.0.4285 + 340 Radio
    06-25-13 10:17 AM
  8. cchilderhose's Avatar
    Tried this leak and entire email functions stopped. Loaded OS again with Autoloader and still same issues. Emails would not open and could not compose emails. Could do everything else.

    Went back to the 10.1.0.4285 with the 10.2.0.228 radio. Working very well and no issues. Will stick to this until another 10.2 comes out that is more stable.
    06-25-13 10:44 AM
  9. Wigley458's Avatar
    Tried this leak and entire email functions stopped. Loaded OS again with Autoloader and still same issues. Emails would not open and could not compose emails. Could do everything else.

    Went back to the 10.1.0.4285 with the 10.2.0.228 radio. Working very well and no issues. Will stick to this until another 10.2 comes out that is more stable.
    Did u include a wipe in ur process

    Z10STL100-3/10.2.0.93 & Posted from my awesome Z10 via cb10. My Channel pin http://channelpin.com/C000B3B57
    06-25-13 10:46 AM
  10. cchilderhose's Avatar
    Yeah I followed the steps and wiped after loading the OS which bricked the phone. Then ran the Autoloader again to reinstall which worked but something still was wrong. I may try again later as I was using a crappy cable so maybe that was the issue possibly.
    06-25-13 10:53 AM
  11. Wigley458's Avatar
    Yeah I followed the steps and wiped after loading the OS which bricked the phone. Then ran the Autoloader again to reinstall which worked but something still was wrong. I may try again later as I was using a crappy cable so maybe that was the issue possibly.
    Weird. Next time if that happens just restore the settings over again. That should fix it

    Z10STL100-3/10.2.0.93 & Posted from my awesome Z10 via cb10. My Channel pin http://channelpin.com/C000B3B57
    06-25-13 11:10 AM
  12. cchilderhose's Avatar
    Thanks for the tip and I will try it next time.
    06-25-13 11:42 AM
  13. gcabroad's Avatar
    For some reason I cannot restore from a back up. It keeps saying "Incompatible device software". I have BB Link 1.1.1.26 in there a newer one I don't know about?

    If it weren't for the fact I need my contacts, I wouldn't care. The new voice recognition software if super duper. BB10 was lagging in that dpt. but they have totally cough up.

    Can anyone help?
    06-25-13 06:52 PM
  14. gcabroad's Avatar
    For some reason I cannot restore from a back up. It keeps saying "Incompatible device software". I have BB Link 1.1.1.26 in there a newer one I don't know about?

    If it weren't for the fact I need my contacts, I wouldn't care. The new voice recognition software if super duper. BB10 was lagging in that dpt. but they have totally cough up.

    Can anyone help?
    06-25-13 06:52 PM
  15. Wigley458's Avatar
    For some reason I cannot restore from a back up. It keeps saying "Incompatible device software". I have BB Link 1.1.1.26 in there a newer one I don't know about?

    If it weren't for the fact I need my contacts, I wouldn't care. The new voice recognition software if super duper. BB10 was lagging in that dpt. but they have totally cough up.

    Can anyone help?
    Need more info. R u trying to restore from a 228 backup? Cause ya. U can't go backwards.

    But. Failing that. Just reboot link. Unplug and re plug in phone. And it shud work. Sometimes link has issues. And needs to be restarted a couple times. Also. Try clicking on dif ones to try and a map it out of its weird ness

    Z10STL100-3/10.2.0.93 & Posted from my awesome Z10 via cb10. My Channel pin http://channelpin.com/C000B3B57
    06-25-13 07:27 PM
  16. airmo's Avatar
    eh. I guess ill wait for the actual release
    06-25-13 08:49 PM
  17. gcabroad's Avatar
    Need more info. R u trying to restore from a 228 backup? Cause ya. U can't go backwards.

    But. Failing that. Just reboot link. Unplug and re plug in phone. And it shud work. Sometimes link has issues. And needs to be restarted a couple times. Also. Try clicking on dif ones to try and a map it out of its weird ness

    Z10STL100-3/10.2.0.93 & Posted from my awesome Z10 via cb10. My Channel pin Wigley's News - BlackBerry BBM Channel Pin for Wigley's News

    Yea. I am trying to to do just that... What I did do to get my contacts back is I refreshed from an old BB Protect backup I did on my Torch 9800. It is not ideal, but it's better than nothing.
    06-26-13 12:37 AM
  18. fullthrottlex's Avatar
    do anyone have any problems with this after doing a swipe from settings menu and not from the volume reset. it is running and everything but not after a swipe, mines just gets reboot where i see the blackberry and then black screen. tried so many times. after that i tried the volume reset only. it works and everything and haven't tried to use the swipe again until the weekened. any sugguestion is appriciated.
    06-26-13 01:44 AM
  19. ARWestenberger's Avatar
    Still getting the reboots every night while it's charging. This time at 3:46 AM.

    Posted via CB10
    06-26-13 06:57 AM
  20. Wigley458's Avatar
    do anyone have any problems with this after doing a swipe from settings menu and not from the volume reset. it is running and everything but not after a swipe, mines just gets reboot where i see the blackberry and then black screen. tried so many times. after that i tried the volume reset only. it works and everything and haven't tried to use the swipe again until the weekened. any sugguestion is appriciated.
    Sorry. I have no idea what your talking about with swipe and all? And using the volume keys is just a reboot. Its not a "wipe" if that's what you mean

    Z10STL100-3/10.2.0.93 & Posted from my awesome Z10 via cb10. My Channel pin http://channelpin.com/C000B3B57
    06-26-13 06:59 AM
  21. radlink14's Avatar
    This ^
    Disconnects... ALOT.
    06-26-13 09:50 AM
  22. Yosep Wow's Avatar
    Just load this one. Thankx.. still setting my device. Same issue with whatsapp. Doesnt show on my hub

    Posted via CB10
    06-26-13 12:12 PM
  23. anon(1341046)'s Avatar
    Don't know if this has been brought up. I just reloaded this leak without the memory wipe and worked like a charm this time. Restore was smooth.
    Has anyone noticed when toy try to bridge to PlayBook it says "PlayBook must be updated". Is that a sign of bb10?

    Posted via CB10
    06-26-13 02:37 PM
  24. cchilderhose's Avatar
    Don't know if this has been brought up. I just reloaded this leak without the memory wipe and worked like a charm this time. Restore was smooth.
    Has anyone noticed when toy try to bridge to PlayBook it says "PlayBook must be updated". Is that a sign of bb10?

    Posted via CB10
    I had issues with the security wipe so may try it again without like you. Did you also restore the data in stages as suggested or all at once?
    06-26-13 03:12 PM
  25. PowderJockey's Avatar
    I had issues with the security wipe so may try it again without like you. Did you also restore the data in stages as suggested or all at once?
    I did all 3 at once, but checked off individually. Had no problem.

    ZED-10 For the person on the move! OS 10.2.0.93
    06-26-13 03:48 PM
517 ... 1415161718 ...

Similar Threads

  1. 10.1.0.2354 Autoloader for STL100-2//3/4
    By SCrid2000 in forum BB10 Leaked/Beta OS
    Replies: 1250
    Last Post: 07-04-13, 12:39 PM
  2. When the new leaked Full OS for STL 100-1like 10.1.0.1880
    By zack_li in forum BB10 Leaked/Beta OS
    Replies: 31
    Last Post: 05-25-13, 09:10 PM
  3. Full Housing for a BB Pearl 8130
    By enc219 in forum BBOS Phone Accessories
    Replies: 6
    Last Post: 02-02-10, 07:04 PM
  4. new full housing for pearl 8130
    By John Yester in forum BlackBerry Pearl 81xx
    Replies: 18
    Last Post: 05-30-09, 07:24 PM
  5. Full retail for Storm
    By bimmerfest in forum BlackBerry Storm
    Replies: 8
    Last Post: 10-16-08, 05:42 PM
LINK TO POST COPIED TO CLIPBOARD