1. tahabashir1991's Avatar
    i installed from autoloader 10.3.1.938 on my stl 1 a day before yesterday .... my procedure at that time was

    1. upgraded from 10.3.1.821
    2. When mobile restarts after completion of os installation i unplug the usb cable
    2. Then security wipe
    .... and i faced these issues

    1. No initial Setup ( not on first start not after sec wipe )
    2. No notification tone for call and sms but they are in hub .....

    Did every thing to resolve again autoloader security wipe battery pull hard reset but issue persist

    yesterday i move back to my official 10.2.1.3247 and today

    1. installed the same autoloader and this time my previous os is 10.2.1
    2. when installation completes i didnt remove the cable ....... even the pc shows that remove and complete your setup but i keep it plugged until mobile boots up and shows the initial setup and now ring tone for call and sms are working

    what was different yesterday and today

    1. upgraded from 10.3.1.821 but today used autoloader over 10.2.1.3247 ( may be it didnt make any difference in case of autoloader but telling every thing because i want this others to check )
    2. keep it plugged untill screen came

    except these two points nothing was different but now my mobile stl 1 properly working with 938 os ......... try it .... if this works

    note : initial setup did every thing demos sim wifi connection but for BB ID log in i go to setting and signed in from there ..... it didnot come up in initial setup as with previous builds
    10-23-14 12:30 PM
  2. Sanjoov's Avatar
    Similar experience. Earlier was on non destructive, then did autoloader, wiped, autoloader, restricted restore and all works perfect now .

    Posted via CB10
    tahabashir1991 likes this.
    10-23-14 12:35 PM
  3. LostOnThePianoRoll's Avatar
    I think you can try re running the autoloader until you get a setup screen.. as simple as that..
    Because the autoloader wipes everything before installing so it shouldn't matter where you're coming from..

    Posted via CB10 on my Z10STL100-1/10.3.1.821
    10-23-14 12:48 PM
  4. Jorge Zile Vaccaro's Avatar
    I think you can try re running the autoloader until you get a setup screen.. as simple as that..
    Because the autoloader wipes everything before installing so it shouldn't matter where you're coming from..

    Posted via CB10 on my Z10STL100-1/10.3.1.821
    Videos in instagram not well

    ( Fix ) STL 1 _ 10.3.1.938 issues-308790d1414088788t-os-10-3-1-938-fixes-findings-thread-img_20141023_142515.png
    10-23-14 03:06 PM
  5. Gearheadaddy's Avatar
    Why did you wipe AFTER install. We know that somrtimes it breaks things. Using an autoloader wipes everything as it loads...

    Crackberry Genius on Verizon 10.3.1.938
    10-23-14 04:25 PM
  6. Kaye_max008's Avatar
    i installed from autoloader 10.3.1.938 on my stl 1 a day before yesterday .... my procedure at that time was

    1. upgraded from 10.3.1.821
    2. When mobile restarts after completion of os installation i unplug the usb cable
    2. Then security wipe
    .... and i faced these issues

    1. No initial Setup ( not on first start not after sec wipe )
    2. No notification tone for call and sms but they are in hub .....

    Did every thing to resolve again autoloader security wipe battery pull hard reset but issue persist

    yesterday i move back to my official 10.2.1.3247 and today

    1. installed the same autoloader and this time my previous os is 10.2.1
    2. when installation completes i didnt remove the cable ....... even the pc shows that remove and complete your setup but i keep it plugged until mobile boots up and shows the initial setup and now ring tone for call and sms are working

    what was different yesterday and today

    1. upgraded from 10.3.1.821 but today used autoloader over 10.2.1.3247 ( may be it didnt make any difference in case of autoloader but telling every thing because i want this others to check )
    2. keep it plugged untill screen came

    except these two points nothing was different but now my mobile stl 1 properly working with 938 os ......... try it .... if this works

    note : initial setup did every thing demos sim wifi connection but for BB ID log in i go to setting and signed in from there ..... it didnot come up in initial setup as with previous builds
    Load 938 autoloader, if it skips initial setup, press power button and don't let go for 10 secs (Hard Reset)
    You will get initial setup and tones

    Snow White Z10 10.3.0.1052
    10-23-14 05:21 PM
  7. alaviss's Avatar
    Incase if you rebooted and do everything without results then open the browser and type

    oobe://

    It'll ask you to open initial setup and then enjoy

    Posted via CB10
    10-23-14 07:47 PM

Similar Threads

  1. Help Blackberry Links Issues- Ayuda con BBLink
    By Rodrigo Gimenez1 in forum BlackBerry Z10
    Replies: 3
    Last Post: 10-24-14, 01:47 PM
  2. 10.3.1.938 Autoloaders?
    By smoothrunnings in forum BB10 Leaked/Beta OS
    Replies: 11
    Last Post: 10-23-14, 04:11 PM
  3. blackberry passport battery issue + unknown memory usage
    By terry0850 in forum Ask a Question
    Replies: 1
    Last Post: 10-23-14, 10:46 AM
  4. What do you guys think of 10.3.1
    By Sandrot in forum BB10 Leaked/Beta OS
    Replies: 1
    Last Post: 10-23-14, 10:24 AM
  5. How do I install 10. 3 update on Q10?
    By CrackBerry Question in forum Ask a Question
    Replies: 1
    Last Post: 10-23-14, 10:06 AM
LINK TO POST COPIED TO CLIPBOARD