07-05-15 12:26 PM
515 ... 1213141516 ...
tools
  1. lcgoldman's Avatar
    My battery has been wretched!

    Yes, this screenshot is from my AT&T Passport on this OS:


    Attachment 342216

    Posted via CB10
    Last night I let the phone run down until it shut off. Then charged it fully. Took it off the charger before I went to bed. Seven hours later it was at 97%.

    Let's see how long it lasts through the day.

    Posted via CB10
    03-19-15 06:49 AM
  2. muindor's Avatar
    That is why you need to do a destructive update to clear any bugs update with an autoloader then security wipe then reinstall with out a back up and see if that clears any problems. Most problems I see on the forum are with non destructive updates. Yes I did do a non destructive update this time as I had no bugs. If I had any issues I would do an autoloader wipe autoloader install

    Posted via CB10
    I'll try that later, as my only option because no one has a real solution for battery drain to provide. The battery is much worse for me after a BLITZ Coming from 10.3.1.2243. It's been fantastic on 2243, lasted me two days. After 15 hours it still was over 50%. Now after 5 hours off the charger it's already down to 50% with the same usage. I think I'll try the Autoloader. If that helps I'll never "update" again, it only causes problems and stress, and takes away my lifetime which I don't want to waste for looking for solutions for bugs in an OS.
    Very disappointed.

    Last edited by muindor; 03-19-15 at 07:57 AM.
    03-19-15 07:38 AM
  3. anon(5818411)'s Avatar
    Facebook can't open any photos when I press on it the HUB is unusable for 15sec because it thinks the facebook photo is open in it.

    Posted via CB10
    03-19-15 07:56 AM
  4. Paul86's Avatar
    So did you wait for everything to settle or did you first do the Blitz update and then Autoloader?

    My battery seems worse than on .2243 on my Z30 after a Blitz update to .2582. A 3 minute phone call used 6% battery whereas before on .2243 a one hour phone call only used 6% battery.

    I used Robs BLITZ file.



    Used Sachesi to upgrade from 10.3.1.2558

    Yeah. I charged it mid day just because that has been habit for a while with poor battery life, but it's pretty good. I feel it's the same as 10.2.1

    Attachment 342392

    Posted via CB10
    Attached Thumbnails Findings and Fixes OS 10.3.1.2582-img_20150319_085606.png  
    03-19-15 08:00 AM
  5. anon(5818411)'s Avatar
    That is why you need to do a destructive update to clear any bugs update with an autoloader then security wipe then reinstall with out a back up and see if that clears any problems. Most problems I see on the forum are with non destructive updates. Yes I did do a non destructive update this time as I had no bugs. If I had any issues I would do an autoloader wipe autoloader install

    Posted via CB10
    These are consumer releases so no you aren't supposed to do a destructive update. Consumers coming from 10.2.1 on to this which would cause many more bugs than 10 version numbers.

    This is something your carriers would say or someone on bbos would say just do a battery pull.

    No consumers know what a autoloader is, nvm going through all the work of not restoring.

    By the way all the bugs I have in this release are different then the last ones. Plus I even go a new phone and the quick sharing bug still remains as it did on my Z30.

    Posted via CB10
    03-19-15 08:01 AM
  6. Paul86's Avatar
    Could a mod please clean up my post and remove the second image. I don't know how I managed that. Thanks

    Posted via CB10
    03-19-15 08:02 AM
  7. engrbugs's Avatar
    Still my passport at leaked 2582 has double typing issue at 1/100 character I guess. I hope next build it will be clean!

    Posted via CB10
    03-19-15 08:27 AM
  8. Gajja's Avatar
    Confirmed.

    Not fixed : Keyboard feedback still noisy at 0%, anybody else can confirm this?

    Z30, 10.3.1.2582.

    Posted via CB10
    Darn, I was hoping that would be fixed.
    03-19-15 08:59 AM
  9. tw820's Avatar
    Since my Z30 died last week, I had to go to my backup Z10,and either j have forgotten just how bad the battery life is on this thing or it has gotten worse! After 5hrs at work it was already down to 48%

    Posted via CB10
    03-19-15 09:45 AM
  10. conite's Avatar
    Since my Z30 died last week, I had to go to my backup Z10,and either j have forgotten just how bad the battery life is on this thing or it has gotten worse! After 5hrs at work it was already down to 48%

    Posted via CB10
    10 hours on a 2 year old battery - could be worse. We usually get about 10-14 hours with medium+ business use.

    Z30STA100-5/10.3.1.2582
    03-19-15 10:02 AM
  11. lcgoldman's Avatar
    Since my Z30 died last week, I had to go to my backup Z10,and either j have forgotten just how bad the battery life is on this thing or it has gotten worse! After 5hrs at work it was already down to 48%

    Posted via CB10
    Ha! I would have been thrilled with that battery life on my Z10. I was getting a total of four to five hours. Happy to have better battery life on my Passport.

    Posted via CB10
    03-19-15 10:47 AM
  12. Gajja's Avatar
    Received the update few hours back OTA. Just noticed that I cant swipe up to unlock the device unless I press the power button. Didn't have it in the 10.3.1.2558 version.
    Anyone else having the same issue?

    Z30STA100-2/10.3.1.2582

    Posted via CB10
    That sounds like one of your settings has been changed during the update. You may be able to change the setting back to how it was before.
    kbz1960 likes this.
    03-19-15 11:06 AM
  13. Gajja's Avatar
    Since this update I have severe Bluetooth issues. Headset is showing as connected but not working. Did already reconnect. Does not help. Boot neither.
    I have this, in fact it started on the previous OS 10.3.1.2576. Did you raise it as a problem on the BlackBerry support pages so they know to fix it ?
    03-19-15 11:17 AM
  14. D3C0D3R's Avatar
    Received the update few hours back OTA. Just noticed that I cant swipe up to unlock the device unless I press the power button. Didn't have it in the 10.3.1.2558 version.
    Anyone else having the same issue?

    Z30STA100-2/10.3.1.2582

    Posted via CB10
    Just a simple setting that got reset, easy fix.

    Go to Settings->Display, then enable swipe to wake.

    Hope it helps!

    Praise be unto our Lord, Squircle | Passport SQW100-1/10.3.1.2558
    sweetrogue likes this.
    03-19-15 11:36 AM
  15. thermiks's Avatar
    findings and fixes thread would be 102938x more awesome if opening post is updated with relevant dinsings and fixes..
    kbz1960 and hyc121 like this.
    03-19-15 11:43 AM
  16. a_bateman's Avatar
    findings and fixes thread would be 102938x more awesome if opening post is updated with relevant dinsings and fixes..
    I'd like to see the math that got you to that number :P.

    I was honestly thinking the same thing. My math only came out to 102935x though. Maybe I forgot to carry a number...

    Posted via CB10
    kbz1960 and D3C0D3R like this.
    03-19-15 11:51 AM
  17. Brit6's Avatar
    Same problem as me! Let me know if you fix it!

    I'm on:

    SW 10.3.1.1779
    OS 10.3.1.2576

    Since this update I have severe Bluetooth issues. Headset is showing as connected but not working. Did already reconnect. Does not help. Boot neither.
    03-19-15 12:22 PM
  18. conite's Avatar
    I'd like to see the math that got you to that number :P.

    I was honestly thinking the same thing. My math only came out to 102935x though. Maybe I forgot to carry a number...

    Posted via CB10
    Problem with this is that the first post would look something like this:

    1) 4 people have problem x, but works fine for everyone else
    2) 1 person has problem y, but works fine for everyone else
    3) 235 people have no idea how to update correctly, most likely did it wrong, and are reporting tons of issues they created for themselves
    4) 7 people are happy
    5) regular group of disgruntled folks are still disgruntled
    6) an actual issue buried so deep, it is invisible

    Z30STA100-5/10.3.1.2582
    cbvinh, Pdinos3, D3C0D3R and 6 others like this.
    03-19-15 12:38 PM
  19. Tim-ANC's Avatar
    Can't back up with latest Link. States "Backup did not complete" on my AT&T US Passport on original OS 10.3.1.1955. I successfully backed up my Z10 with 10.2.1. Installed OS 10.3.1.2582, now the Z10 gets the same backup error.

    http://forums.crackberry.com/ask-que...grade-1006969/
    03-19-15 12:40 PM
  20. uaegangster111's Avatar
    OTA is out for the UAE

    Posted via CB10
    03-19-15 01:31 PM
  21. kbz1960's Avatar
    Does it finish if you uncheck application data?
    03-19-15 01:34 PM
  22. BMCruiser's Avatar
    I've fixed it by not displaying social media contacts in the contacts app. I think the security features of Twitter, Facebook, and LinkedIn override the ability to share the contact. If you only show your cloud based and local contacts you should be able to share them. You just don't share their Twitter, Facebook, and LinkedIn info as part of the contact info.

    Worked for me.

    Posted via CB10
    I have a theory about the contact sharing issue : your contacts database becomes damaged or corrupted over time, through multiple associations with other accounts (social media, BBlink, etc). Eventually contacts sharing stops working and I think it reaches a point where OS upgrade is unable to fix it.

    I also had the issue and fixed it by using ContactsImEx to export my contacts to a CSV, then deleting all local contacts. After that I imported them again with no other accounts on the device, and sharing worked. I have since added my other accounts back (not BBLINK though) , and contact sharing seems to be working still. I should add that I switched auto merging off before importing.

    Posted via CB10
    03-19-15 02:00 PM
  23. Tim-ANC's Avatar
    Does it finish if you uncheck application data?
    No, and neither with quick or full on both Z10 and PP. The message comes up about 2 minutes after engaging the backup. It doesn't even try. Did backup on Sachesi no problem.
    03-19-15 03:02 PM
  24. D3C0D3R's Avatar
    No, and neither with quick or full on both Z10 and PP. The message comes up about 2 minutes after engaging the backup. It doesn't even try. Did backup on Sachesi no problem.
    Have you tried ONLY the settings part of custom backup? Or trying it partly without settings if that doesn't work?

    Praise be unto our Lord, Squircle | Passport SQW100-1/10.3.1.2558
    03-19-15 04:09 PM
  25. engrbugs's Avatar
    Darn, I was hoping that would be fixed.
    There is setting in this one. Look in settings keyboard feedback

    Posted via CB10
    03-19-15 05:54 PM
515 ... 1213141516 ...

Similar Threads

  1. 10.3.1.2582 live links
    By JJCordero in forum BB10 Leaked/Beta OS
    Replies: 504
    Last Post: 04-22-17, 11:05 AM
  2. BB OS version 10.3.1.1784 size 746mb
    By cracked1up in forum BlackBerry Z30
    Replies: 18
    Last Post: 03-17-15, 11:48 PM
  3. How can I delete from hub and server only on my Z30?
    By nilocZ30 in forum BlackBerry Z30
    Replies: 2
    Last Post: 03-17-15, 10:16 AM
  4. How can I get the BlackBerry os 10.3.1 for my Z10 stl100-1?
    By Paul Mndima in forum BlackBerry 10 OS
    Replies: 8
    Last Post: 03-17-15, 05:10 AM
  5. Minor bug in 10.3.1
    By vhl71 in forum BlackBerry Z30
    Replies: 2
    Last Post: 03-16-15, 02:32 PM
LINK TO POST COPIED TO CLIPBOARD