04-11-14 03:09 PM
59 123
tools
  1. Catinboots's Avatar
    Having same issue with Q10 on Toyota Rav4 2008.

    Posted via CB10
    12-20-13 03:29 PM
  2. roachdaniel's Avatar
    Just installed the latest link. the issue is solved.
    12-20-13 11:57 PM
  3. vrishal's Avatar
    I had the same problem with my z10 on stl-4 on 10.2.1.1055

    I just loaded the latest leak. Will try it tomorrow in my car and update. The release notes indicate that the issue is fixed. One can hope!!

    -Vrishal

    Posted via CB10
    12-21-13 12:01 AM
  4. go1ndr's Avatar
    I had the same problem with my z10 on stl-4 on 10.2.1.1055

    I just loaded the latest leak. Will try it tomorrow in my car and update. The release notes indicate that the issue is fixed. One can hope!!

    -Vrishal

    Posted via CB10
    Loaded the newest leak today.
    Paired w/ my MB and it worked. Turned car off and got out-back in car in 5 mins and it didn't show again. I clicked on the search and it found and connected it -so that is an plus-however it should have found it (phone/car) automatically. Will do some re-boots and try again tomorrow. Maybe some setting I don't have set correctly-LOL

    Posted via CB10
    12-21-13 12:40 AM
  5. andalex's Avatar
    I just did exhaustive testing with the new leak that I installed last night (10.2.1.1259) on my STL100-3. I did not restore anything, set everything up from scratch.
    The pairing works fine with my ML 350, but after I shut down the engine, auto-re-pairing fails. I tried to erase the profiles, do hard reset, everything I could think of - no success.

    My problems with the 1055 leak regarding auto-pairing fixed by themselves after about a week. I just hope, one day it will fix again itself, until then I keep re-pairing every time I get into the car manually. And I have to do the whole setup every time, because even though the connection is saved in the Z10 and the phone is saved in the car, they are unable to create the connection again. I have to erase the profiles on both every time I get in the car.

    Let me know if you figure out the secret.
    Last edited by andalex; 12-21-13 at 05:15 PM.
    12-21-13 01:41 PM
  6. go1ndr's Avatar
    Loaded the newest leak today.
    Paired w/ my MB and it worked. Turned car off and got out-back in car in 5 mins and it didn't show again. I clicked on the search and it found and connected it -so that is an plus-however it should have found it (phone/car) automatically. Will do some re-boots and try again tomorrow. Maybe some setting I don't have set correctly-LOL

    Posted via CB10
    Update-blue tooth is working great once again--all issues resolved!

    Posted via CB10
    12-21-13 09:33 PM
  7. andalex's Avatar
    I figured out the solution to the auto-pairing issue between the Mercedes-Benz Comand Module and the OS 10.2.1.
    So the problem was , that although the pairing worked fine with my ML 350, after I shut the engine down, auto-re-pairing failed, and even manually, the phone and the car were unable to connect, and I had to delete both profiles and had to start from scratch.

    This issue was the same with the OS 10.2.1.1055, and then suddenly resolved and I could not figure out what I did differently. Today I found out. The problem was that the initial pairing can be done in two ways in the MB.Bluetooth and Auto pairing issues with 10/2/1/1055 HELP!-img_20131222_120010.jpg

    After you hit Update in the Connect Phone Tab and the you see that your phone was found by the car, it displays its name.
    Now, here I moved the jog dial to the right and selected Authorize. The pairing took place and it worked - until I powered down the engine.
    Then the two systems did not see each other.

    Today after a few tries after I got to the same scene, I just pressed down the jog dial, while the Phone's name was highlighted.
    The pairing took place again, but this time it remained a permanent one. It worked all day, in and out of the car.
    Love it!

    If you had a problem in your MB - try this method.
    12-22-13 06:54 PM
  8. go1ndr's Avatar
    I know that this is an older thread but if any of you are still having issues with your phone pairing with your car, I noticed on the latest leak (1925/1926 radio) that when I went to close my apps running in the back ground (task cleaner app) it showed one of the Android apps running that was called "Bluetooth Sharing". It hit me that this app must be needed to pair with different devices/cars, so instead of doing a mass clean/fix/close of all the apps, I left that one and have no problems ever since. Just a thought and no guarantees that it will work.
    01-24-14 04:49 PM
  9. Malcom Lapointe's Avatar
    I do have the exact same issue between my ML 350 and my BlackBerry Z10!!
    04-11-14 03:09 PM
59 123

Similar Threads

  1. Can't add contacts manually PLZ HELP!!!
    By junyoung1018 in forum BlackBerry Q10
    Replies: 5
    Last Post: 01-21-14, 11:13 AM
  2. Replies: 5
    Last Post: 12-07-13, 03:11 AM
  3. os 10.2.1.1055 on Z30 - got my calls working!
    By nademon in forum BB10 Leaked/Beta OS
    Replies: 25
    Last Post: 11-20-13, 02:02 PM
  4. why are ppl so excited about 10.2.1 new android runtime?
    By fyngfyn in forum General BlackBerry Discussion
    Replies: 21
    Last Post: 11-14-13, 08:15 PM
  5. Need help with sideloading on 10.2 !
    By J_K_Resnick in forum BB10 Android App Sideloading
    Replies: 3
    Last Post: 11-14-13, 06:45 PM
LINK TO POST COPIED TO CLIPBOARD