1. trueredsoxfan_58's Avatar
    Anytime i upgrade to my Tmobile STL1-003 (specifically 10.3.1.1154) to anything beyond 10.3.1.xxxxxx I cant boot up after a battery pull. The LED will flash twice, then pause, then flash 4 times, (this sequence repeats). The only way i can get it to boot is to connect it to a PC (without the battery) then put the battery in. Then it will boot up.

    Restoring in BB link back to the official 10.2.1.xxxx fixes the issue. Any ideas? I really like 10.3.1 and would like to stay

    EDIT: dammit, title spelling, should be boot not book, mod if you could change this it would be much apreciated
    (Thanks for fixing title mod)

    EDIT 2: I think have found the issue. Running the 10.3.1.1154 autoloader on Windows 10 somehow screws up the install. Running it on a different PC running windows 7 seems to have fixed the issue.
    Ill make another edit in 24 hours to check to confirm its fixed. Autoloading on Windows 10 should be avoided

    Thanks for all the help
    Last edited by trueredsoxfan_58; 12-26-14 at 11:01 PM.
    12-26-14 10:17 PM
  2. cycle_wala's Avatar
    Sounds so similar to the tethered jailbreak in the iPhone4 scenario years ago. Anyway, that is not related to you or is going to help you. I just said what I remembered

    Posted via CB10
    12-26-14 10:25 PM
  3. trueredsoxfan_58's Avatar
    yeah, thats exactly what it is like. I have to plug into a computer every time to boot. (used to have an iPod Touch i would Jailbreak all the time)
    12-26-14 10:26 PM
  4. anon(9208252)'s Avatar
    Try reloading your software,
    12-26-14 10:29 PM
  5. trueredsoxfan_58's Avatar
    did that. Going back to official 10.2.1 through BBlink fixes it. However I really like 10.3.1 on my q10 (with no issues) am trying to get it loaded on my z10
    12-26-14 10:33 PM
  6. anon(9208252)'s Avatar
    Are you sure you have the correct autoloader,
    12-26-14 10:35 PM
  7. BigBadWulf's Avatar
    Seeing a blue LED after installing 10.3.1?
    12-26-14 10:39 PM
  8. trueredsoxfan_58's Avatar
    yes, checked that a few time. It boots up after connecting to PC momentarily and i can use it without issue until I do a battery pull, then it is unable to boot up and flashes the code. I have checked the autoloader many times to make sure. been using this link https://mega.co.nz/#!AtYgiSpa!Igq4Vf...baAAGJCBM0rhq0

    no blue LED. Only red flashing the before mentioned code. Read though that thread to make sure i didnt have the same issue.

    Thanks mod for fixing the title
    BigBadWulf likes this.
    12-26-14 10:40 PM
  9. BigBadWulf's Avatar
    No problem, but you can report the post and request the title fix.

    Try getting the OS from here:


    http://forums.crackberry.com/bb10-le...rchive-943672/
    12-26-14 10:45 PM
  10. n8tiveg's Avatar
    Are you restoring do you do a security wipe after the install if you do redo the autoloader after wipe

    Posted via CB10
    12-26-14 10:47 PM
  11. trueredsoxfan_58's Avatar
    I'll try the alternative link BigBadWulf. Thanks, will report back if fixed.
    I dont do a security wipe. To get it back to working i do just a restore in BBlink. I have also tried SIC wipe and then an autoloader and the issue remains.
    12-26-14 10:48 PM
  12. anon(9208252)'s Avatar
    I'll try the alternative link BigBadWulf. Thanks, will report back if fixed.
    I dont do a security wipe. To get it back to working i do just a restore in BBlink. I have also tried SIC wipe and then an autoloader and the issue remains.

    Do a security wipe after the install, then do a restore.
    12-26-14 10:53 PM
  13. trueredsoxfan_58's Avatar
    Ok so after countless reloads, I tried an autoloader on a different computer running windows 7, (Was using windows 10 Tech Preview) (Havent had any other issues with autoloaders with Windows 10 until now.) Running the autoloader on W7 seems to have fixed it.
    So
    Dont autoload on Windows 10

    Have done 3 battery pulls and reboots without issue. Boots up fine now

    Thanks everyone for their help
    anon(9208252) and BigBadWulf like this.
    12-26-14 10:53 PM
  14. anon(9208252)'s Avatar
    Ok so after countless reloads, I tried an autoloader on a different computer running windows 7, (Was using windows 10 Tech Preview) (Havent had any other issues with autoloaders with Windows 10 until now.) Running the autoloader on W7 seems to have fixed it.
    So
    Dont autoload on Windows 10

    Have done 3 battery pulls and reboots without issue. Boots up fine now

    Thanks everyone for their help

    Hey good to hear, glad you got it working.
    12-26-14 10:57 PM
  15. BigBadWulf's Avatar
    Title changed again.
    anon(9208252) likes this.
    12-26-14 11:10 PM
  16. Gearheadaddy's Avatar
    Pulling batteries again!! Oh no! Good way to corrupt the os...unless of course you are shutting phone completely down first...or if it is completely frozen and nothing else works...

    Crackberry Genius on Verizon Z10 on10.3.1.1154
    BigBadWulf and homer1475 like this.
    12-27-14 01:55 AM
  17. trueredsoxfan_58's Avatar
    my issue would occur for both a batter pull and a soft reboot. Good so far now
    12-27-14 02:23 AM
  18. anon(9208252)'s Avatar
    my issue would occur for both a batter pull and a soft reboot. Good so far now
    He is trying to tell you that you shouldn't do battery pulls on these new devices, do the hard reset method
    12-27-14 09:48 AM
  19. Dodger52's Avatar
    I'm using Windows 10 and have autoloaded OS'es, including 13.1.0.1154, on two different Passport's multiple times and have had no problems whatsoever.

    If you really are experiencing problems with autoloader and Windows 10 you should run the autoloader in compatibility mode. This is done by right clicking on the executable, then click on properties click the compatibility tab in the window that appears and then click the checkmark to : "Run this program in compatibility mode for: Windows 7'

    The only problem i've faced with W10 is that uninstalling BlackBerry Link is problematic but that's a different story

    Posted via CB10
    12-27-14 10:13 AM
  20. Chris S Mellor's Avatar
    I've been using Windows 10 Tech Preview since late September and I've not had a single issue (at all) even with anything concerning BlackBerry 10. Must have been a weird freak mistake

    Posted via CB10
    12-27-14 12:16 PM
  21. homer1475's Avatar
    Pulling batteries again!! Oh no! Good way to corrupt the os...unless of course you are shutting phone completely down first...or if it is completely frozen and nothing else works...

    Crackberry Genius on Verizon Z10 on10.3.1.1154
    Was thinking this exact same thing when I read a battery pull, and the fact it was happening AFTER pulling the battery. Leading me to believe he's possible corrupting the OS.


    yes, checked that a few time. It boots up after connecting to PC momentarily and i can use it without issue until I do a battery pull, then it is unable to boot up and flashes the code.
    12-27-14 01:24 PM
  22. trueredsoxfan_58's Avatar
    Probably something on my end. Im just going to do autoloads on my mac running windows 7. Still running good now. Its really a strange issue as I autoload my Q10 on my Windows 10 computer fine with no issues. Ill try compatibility mode in the future
    12-27-14 03:40 PM

Similar Threads

  1. How can I block messages from AT&T?
    By Ukemochi in forum AT&T
    Replies: 2
    Last Post: 12-29-14, 10:46 PM
  2. End of year pics taken by your BlackBerry in 2014
    By AlKuqo in forum General BlackBerry Discussion
    Replies: 8
    Last Post: 12-27-14, 12:47 PM
  3. How to have the home calendar of Q10 sync with my pc's Outlook?
    By CrackBerry Question in forum Ask a Question
    Replies: 1
    Last Post: 12-27-14, 07:12 AM
  4. Can the Passport be hooked up like a Z30?
    By CrackBerry Question in forum Ask a Question
    Replies: 2
    Last Post: 12-27-14, 02:33 AM
LINK TO POST COPIED TO CLIPBOARD