10-15-14 07:38 AM
220 ... 34567 ...
tools
  1. tezytan's Avatar
    102

    Posted via CB10
    LOL!!! Its just some underhood fixes
    09-05-14 10:47 AM
  2. red72's Avatar
    Used link for Bitcasa to load STL-100-4 and all seemed to go OK other than taking forever. Tried to use 7zip to open the autoloader and keep getting an error that says "file is corrupt". Tried twice and got the same response. Any suggestions? What am I doing wrong?

    Verizon Z10 STL100-4 10.3.0.1130
    had the same issue, ended up using the mega mirror. no problems with that.
    09-05-14 10:55 AM
  3. BB_Phoenix's Avatar
    Got 1154 installed successfully on my Z30

    My procedure that has always worked for me on the dozen or more leaks I have installed to date:

    Hard reset phone before starting
    Do a FULL backup to Link. (make sure your using the LATEST version of link)
    Place phone in Airplane mode
    Close Link
    Install Autoloader
    Open Link and do a FULL restore
    Add passwords etc.
    Do several hard resets over the coarse of a day or so (holding +/- volume controls until the Blackberry logo comes up)
    Enjoy your new leak

    p.s. Wiping phone is unnecessary
    austriker likes this.
    09-05-14 10:57 AM
  4. sammysang86's Avatar
    D'ARCY my z100-3 cannot load 10.3.0.1154 through autoloader but the strange thing is if I download using mirror it accepts! WHY?

    Posted via CB10
    09-05-14 11:17 AM
  5. matorix's Avatar
    Who cares, as long as it works.

    Posted via CB10
    09-05-14 11:20 AM
  6. sonicmerlin's Avatar
    Help...
    After loading this new OS on my Verizon Z10, my 4G was borked. It would only connect to 1x, occasionally finding a 3G signal, and the battery drained rather quickly. So I downgraded to the latest official version, 10.2.1.295, but that still didn't fix my 4G problems. Then I upgraded to 10.2.2.932, hoping that would fix my problem. The upgrade went fine and the OS is smooth and fast, but the radio is still screwed up, only doing 1x. I tried changing something, anything in the network settings, but nothing works. I don't know what to do. I would really appreciate some advice. I'm currently on the 10.2.2.1532 radio.
    09-05-14 11:32 AM
  7. anon721037's Avatar
    Find the verizon radio and reload,
    09-05-14 12:00 PM
  8. superdiesel's Avatar
    I read the entire forum. And there is no mention of any water marks I.E. Your pin number on the sides. Usually leaks have them. Are there any on this leak 1154? Also is there anyway to change the boot up screen from the Verizon logo to my own logo? The Verizon logo really does SUCK!

    Posted via CB10
    09-05-14 12:33 PM
  9. Jimberry Storm's Avatar
    Thanks

    Posted via CB10
    09-05-14 12:36 PM
  10. Sinnaz0790's Avatar
    Got through with the non destructive load works fine for me letting the os settle would post my review later on any findings.


    Posed Via My Z3d30
    09-05-14 12:37 PM
  11. Sinnaz0790's Avatar
    Radio fluctuates a lot but not sure if it has to settle I guess.

    Posed Via My Z3d30
    09-05-14 12:40 PM
  12. thurask's Avatar
    I read the entire forum. And there is no mention of any water marks I.E. Your pin number on the sides. Usually leaks have them. Are there any on this leak 1154? Also is there anyway to change the boot up screen from the Verizon logo to my own logo? The Verizon logo really does SUCK!

    Posted via CB10
    Can't change the Verizon logo (that's a carrier thing), but there are no watermarks on the sides. Those tend to stop at around 10.x.y.1000.
    09-05-14 12:45 PM
  13. Arabianhorse's Avatar
    How stable is the camera on this OS, mostly for the Z30?

    Posted via CB10
    Works great. No lag. Just tried it
    Autoloaders for 10.3.0.1154-img_20140905_131529.jpg

    STA-100-3 v 10.2.1.3157; Radio 3182
    joeldf and lift like this.
    09-05-14 01:15 PM
  14. Azensun's Avatar
    I read the entire forum. And there is no mention of any water marks I.E. Your pin number on the sides. Usually leaks have them. Are there any on this leak 1154? Also is there anyway to change the boot up screen from the Verizon logo to my own logo? The Verizon logo really does SUCK!

    Posted via CB10
    No, there aren't any watermarks on this one. And no, unfortunately, carrier boot logos cannot be removed. I wish they could be.

    I see Thurask answered this already. I'm too slow!
    Last edited by Azensun; 09-05-14 at 01:17 PM. Reason: Thurask was faster!
    09-05-14 01:16 PM
  15. VR6's Avatar
    Should I wait, or should I go!?!? AHHHHH
    09-05-14 01:20 PM
  16. Sachin Jain2's Avatar
    Here's some autoloaders on Bitcasa. I've got MEGA mirrors uploading too, but MEGA is a much much slower upload for me.

    These are the FULL autoloaders, they'll wipe your phone, install everything, etc etc. Don't forget your backups. If you're looking for BAR files to do a non-destructive upload, links are here http://forums.crackberry.com/bb10-le...evices-956896/

    Bitcasa Links

    Z10 (STL100-2,3,4) http://l.bitcasa.com/bbse6dfZ

    Q10/Q5 http://l.bitcasa.com/KIXjgFb2

    Z30 http://l.bitcasa.com/jLos0ay2

    Z3 http://l.bitcasa.com/0combiJd

    Z10 - STL100-1 Only http://l.bitcasa.com/VXGI_iyH


    MEGA mirror

    Z10 STL100-2,3,4 - https://mega.co.nz/#!wJt1WDZQ!sf2Mz9...a3rV1Qv5AzAyo0

    Z30 - https://mega.co.nz/#!MAtgiBaT!ztPqo5...mAE70NeLbEn13U

    Q10/Q5 - https://mega.co.nz/#!EQthBSoR!aEyt3n...gjMIlAY9SG-KbU

    Z3 - https://mega.co.nz/#!dFUGkSxa!oph0an...SXRawNRnNWPNGA

    Z10 STL100-1 only https://mega.co.nz/#!xYkyVIgI!tK5KG4...RoLn957ImptdsE
    A tonn of thanks to you

    Posted via CB10
    09-05-14 02:03 PM
  17. sonicmerlin's Avatar
    Find the verizon radio and reload,
    I just tried that. I downloaded the radio autoloader from here: http://forums.crackberry.com/bb10-le...evices-946094/
    ... installed it and it still doesn't work. Just 1x on Verizon in a well covered 4G LTE area. Is it possible for a leaked update to destroy a radio completely? There must be some fix.
    09-05-14 02:31 PM
  18. Sinnaz0790's Avatar
    i did a non destructive install...was pretty simple...how ever so far I've noticed two things the camera doesn't allow you to tap anywhere on the screen to take the photo don't know if it's a setting i'm missing and the flip to wake etc doesn't work and it's turned on in settings...anyone else experiences this?
    09-05-14 02:49 PM
  19. yohannyphm's Avatar
    Need autoloader for Z30 radio only just did the nondestructive update but put the wrong radio now I got the blinking light. Or help building and autoloader withe signed bar file. Thanks in advance

    Posted via CB10
    09-05-14 05:41 PM
  20. thurask's Avatar
    Need autoloader for Z30 radio only just did the nondestructive update but put the wrong radio now I got the blinking light. Or help building and autoloader withe signed bar file. Thanks in advance

    Posted via CB10
    http://l.bitcasa.com/KZXx2mpj
    09-05-14 05:41 PM
  21. yohannyphm's Avatar
    Thanks

    Posted via CB10
    09-05-14 05:48 PM
  22. EchuOkan1's Avatar
    Here's some autoloaders on Bitcasa. I've got MEGA mirrors uploading too, but MEGA is a much much slower upload for me.

    These are the FULL autoloaders, they'll wipe your phone, install everything, etc etc. Don't forget your backups. If you're looking for BAR files to do a non-destructive upload, links are here http://forums.crackberry.com/bb10-le...evices-956896/

    Bitcasa Links

    Z10 (STL100-2,3,4) http://l.bitcasa.com/bbse6dfZ

    Q10/Q5 http://l.bitcasa.com/KIXjgFb2

    Z30 http://l.bitcasa.com/jLos0ay2

    Z3 http://l.bitcasa.com/0combiJd

    Z10 - STL100-1 Only http://l.bitcasa.com/VXGI_iyH


    MEGA mirror

    Z10 STL100-2,3,4 - https://mega.co.nz/#!wJt1WDZQ!sf2Mz9...a3rV1Qv5AzAyo0

    Z30 - https://mega.co.nz/#!MAtgiBaT!ztPqo5...mAE70NeLbEn13U

    Q10/Q5 - https://mega.co.nz/#!EQthBSoR!aEyt3n...gjMIlAY9SG-KbU

    Z3 - https://mega.co.nz/#!dFUGkSxa!oph0an...SXRawNRnNWPNGA

    Z10 STL100-1 only https://mega.co.nz/#!xYkyVIgI!tK5KG4...RoLn957ImptdsE
    Late to the party, but I'm here!. Downloading it now. Thank you DarcyTallGuy! =0)
    siddharth rai likes this.
    09-05-14 05:59 PM
  23. qmendiv's Avatar
    Late to the party, but I'm here!. Downloading it now. Thank you DarcyTallGuy! =0)
    Better late than never. Enjoy loading!
    09-05-14 06:09 PM
  24. SK122387's Avatar
    Why do I still get an error after these files have downloaded? "The archive is either unknown format or damaged"? None of the links here work for me.
    09-05-14 06:51 PM
  25. Arabianhorse's Avatar
    i did a non destructive install...was pretty simple...how ever so far I've noticed two things the camera doesn't allow you to tap anywhere on the screen to take the photo don't know if it's a setting i'm missing and the flip to wake etc doesn't work and it's turned on in settings...anyone else experiences this?
    The camera has no tap to screen feature. You must hit the camera button. The swipe to open is there but requires a much stronger "swipe"

    STA-100-3 v 10.3.0.1154; Radio 1150
    09-05-14 07:04 PM
220 ... 34567 ...

Similar Threads

  1. how to get paid for stickers back?
    By RegN in forum General BBM Chat
    Replies: 5
    Last Post: 03-05-15, 07:29 AM
  2. 10.3.0.1154 - All Devices
    By olaf_d in forum BB10 Leaked/Beta OS
    Replies: 584
    Last Post: 10-26-14, 09:22 PM
  3. Should I invest in BBerry 10.3 devices
    By UKAsh in forum BlackBerry 10 OS
    Replies: 8
    Last Post: 10-26-14, 08:50 AM
  4. Passport AZERTY version for France
    By presean in forum BlackBerry Passport
    Replies: 20
    Last Post: 09-07-14, 01:42 AM
  5. BBM Updated 10.4.4.8
    By Aljean Thein in forum General BlackBerry Discussion
    Replies: 9
    Last Post: 09-04-14, 09:45 PM
LINK TO POST COPIED TO CLIPBOARD