03-01-16 08:50 PM
379 ... 13141516
tools
  1. hangnthere's Avatar
    Yes I do. I read earlier that it should not be active when trying to install. Is that incorrect?

    Posted via CB10
    I've now tried the exe file with BlackBerry Link open but still the same message.

    "This app can't run on your pc "

    Posted via CB10
    05-20-15 08:32 PM
  2. moegh's Avatar
    I've now tried the exe file with BlackBerry Link open but still the same message.

    "This app can't run on your pc "

    Posted via CB10
    Try to open it as administrator maybe

    CB10 - Q10 - 10.3.2.680
    05-20-15 11:44 PM
  3. shahadav's Avatar
    Can I run the posted auto loader on my Z30 as usual? Plain and simple?
    Currently on 10.3.1

    Any requirements prior to installation?
    Thanks

    Posted via CB10
    05-21-15 01:16 AM
  4. Uzi's Avatar
    Can I run the posted auto loader on my Z30 as usual? Plain and simple?
    Currently on 10.3.1

    Any requirements prior to installation?
    Thanks

    Posted via CB10
    Yes business as usual

    Z30STA100-2/10.3.2.680
    shahadav likes this.
    05-21-15 01:19 AM
  5. TommyBB's Avatar
    No joy with trying to download this OS. Stuck at 99% tried a dozen times already. Using Chrome Browser.

    Any ideas. This has never happened to me before...
    05-21-15 10:08 AM
  6. Uzi's Avatar
    No joy with trying to download this OS. Stuck at 99% tried a dozen times already. Using Chrome Browser.

    Any ideas. This has never happened to me before...
    Try different sources? Bitcasa or mega

    Z30STA100-2/10.3.2.680
    TommyBB likes this.
    05-21-15 10:12 AM
  7. TommyBB's Avatar
    Try different sources? Bitcasa or mega

    Z30STA100-2/10.3.2.680
    Hi Usman. I only saw the Mega link for the Z30 autoloader. Bitcasa link please?
    05-21-15 10:53 AM
  8. kbz1960's Avatar
    Hi Usman. I only saw the Mega link for the Z30 autoloader. Bitcasa link please?
    https://drive.bitcasa.com/send/6tMMp...HedRexbIoGYDA/
    TommyBB likes this.
    05-21-15 11:08 AM
  9. TommyBB's Avatar
    What a world of a difference between this OS and every version of 10.3.1 I've been on and its been only about 12 hours so far. My VZW Z30 did not like any version of 10.3.1, at all. Never made it past 10 to 12 hours without charging and was basically a burning brick in my pants pocket every day. Now as cool as a cucumber. I'm VERY pleased. My method of upgrading to 10.3.2.680:

    Remove SIM and SD Cards
    Security wipe
    .680 Autoloader
    Restore contacts from IntouchApp Contacts
    Restore my email accounts
    I refuse to restore from Link. I'm certain a bunch of problems come from Link restores, in my case. YMMV.

    Special thank you to everyone on this thread that answers questions endlessly and without hesitation.
    05-22-15 09:08 AM
  10. nightridah's Avatar
    What a world of a difference between this OS and every version of 10.3.1 I've been on and its been only about 12 hours so far. My VZW Z30 did not like any version of 10.3.1, at all. Never made it past 10 to 12 hours without charging and was basically a burning brick in my pants pocket every day. Now as cool as a cucumber. I'm VERY pleased. My method of upgrading to 10.3.2.680:

    Remove SIM and SD Cards
    Security wipe
    .680 Autoloader
    Restore contacts from IntouchApp Contacts
    Restore my email accounts
    I refuse to restore from Link. I'm certain a bunch of problems come from Link restores, in my case. YMMV.

    Special thank you to everyone on this thread that answers questions endlessly and without hesitation.
    Thanks, I'm really tempted to do it

    Z30STA100-2/10.3.1.2744
    05-23-15 04:49 AM
  11. SBAHETI's Avatar
    Step by step guide to load 10.3.2.680 directly on to 10.3.1.1784 please on Z30-STA100-3.
    I haven't used auto loader any time.
    Please mention the download links at the same place.
    Thanks
    wojt7 likes this.
    05-23-15 05:37 AM
  12. Legal Eagle's Avatar
    Step by step guide to load 10.3.2.680 directly on to 10.3.1.1784 please on Z30-STA100-3.
    I haven't used auto loader any time.
    Please mention the download links at the same place.
    Thanks
    http://forums.crackberry.com/bb10-le...rchive-943672/

    http://forums.crackberry.com/bb10-le...loader-927076/
    05-23-15 05:40 AM
  13. wojt7's Avatar
    Step by step guide to load 10.3.2.680 directly on to 10.3.1.1784 please on Z30-STA100-3.
    I haven't used auto loader any time.
    Please mention the download links at the same place.
    Thanks
    This made my day
    I'm up voting this for a post of the year.
    05-23-15 06:35 AM
  14. Legal Eagle's Avatar
    This made my day
    I'm up voting this for a post of the year.
    Don't mock the newbies, we were all there once !!!

    Just that some of us take the time to read before we post !!!
    KorChi_JapThai and trustgsmx1 like this.
    05-23-15 07:02 AM
  15. pl3th0r4's Avatar
    Hi, need some advise here, am currently on Passport 10.3.1.1779, if I'd like to go to 10.3.2.680(or 681?), which link should i be looking at?

    1) The bitcasa link with 2 files, may I know what is the use of the 2nd smaller sized .asc file?


    or

    2) the megaupload link with 1 file


    Which one should i be using then?
    05-23-15 08:31 PM
  16. Uzi's Avatar
    Hi, need some advise here, am currently on Passport 10.3.1.1779, if I'd like to go to 10.3.2.680(or 681?), which link should i be looking at?

    1) The bitcasa link with 2 files, may I know what is the use of the 2nd smaller sized .asc file?
    http://i.imgur.com/f41wiyN.png

    or

    2) the megaupload link with 1 file
    http://i.imgur.com/hvZPCvq.png

    Which one should i be using then?
    Both link are fine, asc is for signature if I'm not mistaken no need to download that

    Z30STA100-2/10.3.2.680
    05-23-15 08:38 PM
  17. TommyBB's Avatar
    Thanks, I'm really tempted to do it

    Z30STA100-2/10.3.1.2744
    Honestly, the best thing I've done with my Z30 in a long time. I'm doing my wife's upgrade tomorrow. Her's is literally on the factory OS it came with.
    05-23-15 11:06 PM
  18. pl3th0r4's Avatar
    Both link are fine, asc is for signature if I'm not mistaken no need to download that

    Z30STA100-2/10.3.2.680
    Hmm weird, just tried on the .exe from megaupload link for Passport. The minute i double click on the .exe, the command prompt is stuck at resetting device, and my phone went blackscreen+blinking red LED...


    After almost 5mins of this, i unplug the phone and it finally restarted itself and back to normal state(hasnt updated to 10.3.2, still on .1 though)... Phew, thought i'd damage it.

    am i doing this correctly?
    1) connect phone,
    2) exit blend/link,
    3) double click on the .exe and await for it
    Last edited by pl3th0r4; 05-24-15 at 06:43 PM.
    05-23-15 11:40 PM
  19. abhishek_shah1984's Avatar
    Hi Guys,
    kind of stuck...I used the blitz files to upgrade the ATT passport SQW100-3. I see the radio version got updated to 10.3.2.501.
    however, OS version hasnt changed and shows 10.3.1.1955
    the software release shows 10.3.1.1372. I tried 5 times but no luck...
    then i tried to upgrade to 10.3.2.680 and again the same thing happned. Radio got updated but nothing else. Not even the apps.
    Sachesi runs for 30 mins and shows progress for each and every bar file and then BB restarts. usually during teh restart we would see messages saying updates are getting applied, but device restarts pretty quick and then when i see the versions, its still teh old one except the radio. Any idea whats going on in here and what can i do.
    I then used Darcy tools to do teh update and it does show some messages like below. It looks like its not able to find the correct OS file for ATT passport. SQW100-3.
    Does anyone know what OS file needs to be used for ATT passport version.

    Discarded box-1.3.2.9-nto+armle-v7+signed.bar - older than already installed
    Discarded dropbox-1.3.2.15-nto+armle-v7+signed.bar - older than already installed
    Discarded evernote-5.5.0.515-nto+armle-v7+signed.bar - older than already installed
    Discarded facebook-10.6.31.2-nto+armle-v7+signed.bar - older than already installed
    Discarded fuse-1.1.0.67-nto+armle-v7+signed.bar - older than already installed
    Discarded linkedin-10.1.31.322-nto+armle-v7+signed.bar - older than already installed
    Discarded m5730-10.3.2.681-nto+armle-v7+signed.bar - Not a proper radio
    Discarded qc8930.wtr5-10.3.2.681-nto+armle-v7+signed.bar - Not a proper radio
    Discarded qc8960-10.3.2.681-nto+armle-v7+signed.bar - Not a proper radio
    Discarded qc8960.factory_sfi_hybrid_qc8974-10.3.2.680-nto+armle-v7+signed.bar - Not a proper OS
    Discarded qc8960.wtr-10.3.2.681-nto+armle-v7+signed.bar - Not a proper radio
    Discarded qc8960.wtr5-10.3.2.681-nto+armle-v7+signed.bar - Not a proper radio
    Discarded qc8974.wtr2-10.3.2.681-nto+armle-v7+signed.bar - older than already installed
    Discarded retaildemo-10.3.2.18-nto+armle-v7+signed.bar - older than already installed
    Discarded retaildemoshim-127.1.0.47-nto+armle-v7+signed.bar - older than already installed
    Discarded winchester.factory_sfi-10.3.2.680-nto+armle-v7+signed.bar - Not a proper OS

    I did same thing on classic and it went in pretty well and showed all the versions as 10.3.2.

    any help would be appreciated.

    Abhi
    05-25-15 11:41 AM
  20. doaneprint's Avatar
    hi guys! Is it possible to downgrade this OS to 10.2.2. I'm using Z10 Stl-001. I encountered an inconvenient problem. In "Phone", then the tab: "Contact"
    I search for a contact, then go to dial pad, then go back to "contact", i swipe back to delete that contact and search for a new contact. When i swipe , the keyboad disappears and appears then. I didn't see it on 10.3.2.500. Plz fix it. Thank you so much!
    05-26-15 11:07 PM
  21. conite's Avatar
    hi guys! Is it possible to downgrade this OS to 10.2.2. I'm using Z10 Stl-001. I encountered an inconvenient problem. In "Phone", then the tab: "Contact"
    I search for a contact, then go to dial pad, then go back to "contact", i swipe back to delete that contact and search for a new contact. When i swipe , the keyboad disappears and appears then. I didn't see it on 10.3.2.500. Plz fix it. Thank you so much!
    No. You're stuck on 10.3.2.680 or higher.

    Z30STA100-5/10.3.2.680
    05-26-15 11:09 PM
  22. Muhammad Uweis's Avatar
    Ustmaaaan, i have a porsche P9982.
    I want upgrade to 680. Possible i use autoloader for Z10 stl 2/3/4 ?? How about the clock? Will same porsche design or generlly like Z10 ? I need your info. Thank you kaa..

    Posted via CB10
    06-02-15 04:11 PM
  23. Uzi's Avatar
    Ustmaaaan, i have a porsche P9982.
    I want upgrade to 680. Possible i use autoloader for Z10 stl 2/3/4 ?? How about the clock? Will same porsche design or generlly like Z10 ? I need your info. Thank you kaa..

    Posted via CB10
    Sama aja pakai yang STL2 om

    Z30STA100-2/10.3.2.680 | CB Mod
    Muhammad Uweis likes this.
    06-02-15 08:17 PM
  24. Muhammad Uweis's Avatar
    Ustman, this 680 is the official 10.3.2 release now? Or 798 will be official? Please advice. Tq.

    Posted via CB10
    06-08-15 03:31 PM
  25. Muhammad Uweis's Avatar
    Sama aja pakai yang STL2 om

    Z30STA100-2/10.3.2.680 | CB Mod
    Hahaha, ternyata ente indonesia jg suhu, ane kira ente dari negeri tetangga.. haha. Btw, salam kenal ya hu.

    Posted via CB10
    06-08-15 03:39 PM
379 ... 13141516

Similar Threads

  1. Feedback for Mr. Freeze - Positive
    By emailthisaddress in forum Buy, Sell, Trade - Feedback
    Replies: 4
    Last Post: 03-16-16, 02:35 PM
  2. Replies: 8
    Last Post: 05-21-15, 12:27 AM
  3. Ordered Red passport for T-Mobile USA
    By dierre in forum BlackBerry Passport
    Replies: 5
    Last Post: 05-16-15, 08:19 PM
LINK TO POST COPIED TO CLIPBOARD