11-10-14 05:03 AM
39 12
tools
  1. tahabashir1991's Avatar
    all stl1 user who are having issue after installing 10.3.1.938 or 10.3.1.1016 no notification issue on call and on sms or any other notification and no initial setup........... simply load the loader of 10.2.1 ( in my case it was 10.2.1.3442 or 10.2.1.2977 ) and then load this leak 10.3.1.1016

    if you have this issue of notification people say open oobe:// in web browser for initial setup but that do not solve notification issue ... or other solution are many restarts or hard reset

    but the one i am just mentioning is 2000 % verified ....... In your first attempt if you have issue just load 10.2.1 then complete setup and start loading 10.3.1.1016 you will see initial setup and no notification issue

    i dont know the link but i have tested it many time
    10-30-14 11:51 PM
  2. LostOnThePianoRoll's Avatar
    It's a truly weird issue. Thanks!

    Posted via CB10 on my Z10STL100-1/10.3.1.821
    10-31-14 12:32 AM
  3. Jorge Zile Vaccaro's Avatar
    you're wrong, you play a video from an android application and you will realize that you have problems, eg: instagram or netflix or keek and Whatsapp in settings automatic content download, you can not just choose to remove the selection
    10-31-14 12:39 AM
  4. tahabashir1991's Avatar
    you're wrong, you play a video from an android application and you will realize that you have problems, eg: instagram or netflix or keek and Whatsapp in settings automatic content download, you can not just choose to remove the selection
    my point is not this is totally a bug free os ....... i just mentioned completely resolve that issue which i just mentioned
    10-31-14 12:43 AM
  5. Jorge Zile Vaccaro's Avatar
    try to play a video on instagram and see than I mean
    10-31-14 12:44 AM
  6. plugin's Avatar
    all stl1 user who are having issue after installing 10.3.1.938 or 10.3.1.1016 no notification issue on call and on sms or any other notification and no initial setup........... simply load the loader of 10.2.1 ( in my case it was 10.2.1.3442 or 10.2.1.2977 ) and then load this leak 10.3.1.1016

    if you have this issue of notification people say open oobe:// in web browser for initial setup but that do not solve notification issue ... or other solution are many restarts or hard reset

    but the one i am just mentioning is 2000 % verified ....... In your first attempt if you have issue just load 10.2.1 then complete setup and start loading 10.3.1.1016 you will see initial setup and no notification issue

    i dont know the link but i have tested it many time
    tahabashir1991, usually BB10 devices that have just been loaded with new firmware and software, will behave odd if a security wipe is not performed as soon as the new OS is loaded. This tends to solve lots of issues that freshsly updated devices come up,with, especially the good ol' STL100-1 that we have learned to love even as a subpar device among the other Z10 variants.

    However... The issue you describe sounds much more like another phenomenon that the Z10 throws at its users. For some reason sometimes after loading an OS, and even just randomly, it stops emmiting souds, but if you clamp the bottom with your fingers and press gently, it comes back instantly and it stays that way. Believe me, its not specific to my phone. Ive seen it discussed on several forums.

    I made this video to illustrate my explanation:

    10-31-14 02:04 AM
  7. SDM7171's Avatar
    2000%?

    For every person that tried this method, 20 succeeded.

    Impressive!

    Posted via CB10
    10-31-14 02:26 AM
  8. butatx's Avatar
    It works. Thanks for the tips.

    Installing 10.2.1 first and complete the setup resolved the no initial setup issue (which lead to no ringtone).

    Before this I tried to install 10.3 first before loading the 10.3.1 but the issue still persist. I even try to autoload 3-4 times 10.3.1 OS but still to no avail. Installing 10.2.1 solve the problem.
    dark0ne_ likes this.
    10-31-14 03:33 AM
  9. JexterTuazon's Avatar
    Any other way of solving the issue?
    10-31-14 04:02 AM
  10. gambit09's Avatar
    all stl1 user who are having issue after installing 10.3.1.938 or 10.3.1.1016 no notification issue on call and on sms or any other notification and no initial setup........... simply load the loader of 10.2.1 ( in my case it was 10.2.1.3442 or 10.2.1.2977 ) and then load this leak 10.3.1.1016

    if you have this issue of notification people say open oobe:// in web browser for initial setup but that do not solve notification issue ... or other solution are many restarts or hard reset

    but the one i am just mentioning is 2000 % verified ....... In your first attempt if you have issue just load 10.2.1 then complete setup and start loading 10.3.1.1016 you will see initial setup and no notification issue

    i dont know the link but i have tested it many time
    it did not work with me, I reverted back to 1.938 using autoloader still no initial setup, I made the initial setup work by using sic wipe with radio from 801

    z10 stl-1 1.938/radio 801
    10-31-14 07:48 AM
  11. mainely_linux's Avatar
    2000%, STL-1. Yup, checks out.
    10-31-14 07:57 AM
  12. alaviss's Avatar
    oobe:// and a sec wipe after that do the trick for me

    Z10STL100-1/10.3.1.938
    10-31-14 08:48 AM
  13. plugin's Avatar
    You guys should give my method a go.

    It takes about 2000% less time than the next most simple suggestion posted so far, and I guarantee it will solve the issue immediately for some of you. It really works.

    As a matter of fact, the video was shot about one hour before I got around to upgrade to 10.3.1.1016. Guess what issue I had after the upgrade, the solution I chose, and how much time it took?

    I know this is as voodoo as it gets with troubleshooting. You will be surprised.
    10-31-14 09:07 AM
  14. cycle_wala's Avatar
    Ran into the same "No Notification" bug because of "no initial setup" on my STL100-1
    If what I have understood correctly, you recommend to install 10.2.1 OS onto the phone and then install the 10.3.1.1016 on top of it. So should I be doing it via a non-destructive update from 10.2.1 to 10.3.1 or will the autoloader method suffice?

    Thanks in advance.

    all stl1 user who are having issue after installing 10.3.1.938 or 10.3.1.1016 no notification issue on call and on sms or any other notification and no initial setup........... simply load the loader of 10.2.1 ( in my case it was 10.2.1.3442 or 10.2.1.2977 ) and then load this leak 10.3.1.1016

    if you have this issue of notification people say open oobe:// in web browser for initial setup but that do not solve notification issue ... or other solution are many restarts or hard reset

    but the one i am just mentioning is 2000 % verified ....... In your first attempt if you have issue just load 10.2.1 then complete setup and start loading 10.3.1.1016 you will see initial setup and no notification issue

    i dont know the link but i have tested it many time
    10-31-14 02:46 PM
  15. Kaacz's Avatar
    try to play a video on instagram and see than I mean
    WHO CARES ?? this is about solve "no notification issue on call" .. problem for people who install new versions after buggy .8xx leaks ..
    Who cares about ugly Adroid crap apps ??
    Go trolling to another thread please..
    tahabashir1991 likes this.
    10-31-14 02:59 PM
  16. tahabashir1991's Avatar
    Ran into the same "No Notification" bug because of "no initial setup" on my STL100-1
    If what I have understood correctly, you recommend to install 10.2.1 OS onto the phone and then install the 10.3.1.1016 on top of it. So should I be doing it via a non-destructive update from 10.2.1 to 10.3.1 or will the autoloader method suffice?

    Thanks in advance.
    no non destructive .... i am saying autloader method on top of it
    10-31-14 03:53 PM
  17. tahabashir1991's Avatar
    tahabashir1991, usually BB10 devices that have just been loaded with new firmware and software, will behave odd if a security wipe is not performed as soon as the new OS is loaded. This tends to solve lots of issues that freshsly updated devices come up,with, especially the good ol' STL100-1 that we have learned to love even as a subpar device among the other Z10 variants.

    However... The issue you describe sounds much more like another phenomenon that the Z10 throws at its users. For some reason sometimes after loading an OS, and even just randomly, it stops emmiting souds, but if you clamp the bottom with your fingers and press gently, it comes back instantly and it stays that way. Believe me, its not specific to my phone. Ive seen it discussed on several forums.

    I made this video to illustrate my explanation:

    yes i know that i have two z10 white which i bought just after the launch and black one now a month ago ......... the sound issue you are reffering to is present in my white z10 that is defect in hardware ...........
    and here the notification sound in this thread is related to software issues ..... that is somehing else ....... you are not getting sound notification on incoming call but can play music so speaker are working properly and notifications are not.............

    if i get you right you are pointing on hardware side issue of z10 thanks for the video ...... will apply it on my z10 white when next time this issue comes up
    10-31-14 03:57 PM
  18. JexterTuazon's Avatar
    Removing the battery did the trick for me, without the need of installing the 10.2 autoloader.
    kaijai_tm likes this.
    10-31-14 04:37 PM
  19. endemania's Avatar
    My stl 100-1 work very good have no priblems like that..coming from 10.3.1.938
    Now using 10.3.1.1016

    Posted via CB10
    11-01-14 05:58 AM
  20. kaijai_tm's Avatar
    Removing the battery did the trick for me, without the need of installing the 10.2 autoloader.
    Second. Would have been upset to spend 2 hours doing the OPs fix when a battery pull and 2 mins later fixed the issue.

    Posted via CB10
    11-01-14 07:43 AM
  21. Radhakrishna Bhandary's Avatar
    Worked perfectly on my Z10 STL-1 .. Thanks a ton.
    11-01-14 10:01 AM
  22. Hobiano's Avatar
    no call and sms notifications and initial setup after this solution :-/
    what can i do
    11-01-14 10:12 AM
  23. Radhakrishna Bhandary's Avatar
    May be redo this after a security wipe
    11-01-14 11:32 AM
  24. Kaacz's Avatar
    I made this video to illustrate my explanation:
    Why is this YT video in FLASH s*it only ??
    EDIT: ok, in case Flash OFF in browser i was got html5 .. but in case setting "ask for run flash" i was got only info about lack of plugin .. lol
    11-01-14 11:37 AM
  25. cycle_wala's Avatar
    no non destructive .... i am saying autloader method on top of it
    I'm glad it worked for you & the few others. But it didn't work for me. I used 10.2.1.29xx autoloader. Set up everything. Later used the 10.3.1.1016 autoloader and still no initial setup.

    Thanks for trying to help.

    Posted via CB10
    11-01-14 01:25 PM
39 12

Similar Threads

  1. Replies: 16
    Last Post: 01-12-15, 10:14 PM
  2. 10.3.1 Update Issues
    By donmateo in forum BlackBerry Passport
    Replies: 63
    Last Post: 11-03-14, 11:42 PM
  3. How to update my BlackBerry Z10 software to 10.3.1.1016
    By Michael Makori in forum Ask a Question
    Replies: 4
    Last Post: 10-31-14, 07:25 AM
  4. How do I update my Q10 to 10.3.1.1016?
    By CrackBerry Question in forum Ask a Question
    Replies: 1
    Last Post: 10-30-14, 10:11 PM
LINK TO POST COPIED TO CLIPBOARD