02-14-14 07:17 AM
654 ... 2324252627
tools
  1. Big_Ern's Avatar
    Blockbuy, I'm having the same issue with the red blinking light after running the autoloader for .1926. I even created an .1899 autoloader using CAP55 but to no avail.

    How did you resolve your issue?
    I am having this problem as well.

    I had the official 537/1925 OS installed (no leaked os), and I just tried to run the Q10 autoloader for this radio. Everything seemed to be going okay, then the green light changed to a red flashing light (2 short flashes, pause, 2 flash, pause ...) and the screen went blank.

    How do I fix this?

    I tried disconnect, pull battery for a few mins, when I put the battery back in it goes to blank screen with flashing red light when I press the power button. I tried re running the auto loader and get a gren light for a few secs, then back to red flashing..

    Help!
    I'm going on holidays in a few hours and need to get this resolved ASAP
    Thanks!
    01-30-14 04:15 PM
  2. BlueRaven25's Avatar
    Can i download the 1926 radio while i'm currently running the official 1926 update or do i need to be on a leaked os? Experiencing very poor signal since updating to the official 1925 os from the leaked 1055. I have waited for it to settle but only the battery life has improved.

    Z10 STL100-3 10.2.1.1925/1899 Radio
    01-30-14 04:22 PM
  3. DBones1021's Avatar
    Just thought I would share...
    I have noticed a few complaints about issues updating the "official" os with this radio.
    I have a Q10 with the leaked os from right before Xmas. I used this radio and never had a problem. Actually it has been awesome!
    The other night I tried to update the wife's Z10 via Sachesi. The procedure went fine but as you all know it has the 1899 radio which I went ahead and tried updating the radio with this one also. That is when it all went left.
    The Z then would not get pass the blue logo start up. 25% slowly, then stalled at 95% and after battery pulls, pulling the sim and SD card same thing for an hour. I gave up and just did the autoloader from the leaked os for the Z followed by this radio and now BlackBerry bliss.
    So, I really don't know what went wrong initially...I did think that it maybe a possibility that I did not wait long enough the first time to load the radio and confused the os while it was settling. Anyways I know some are just getting to the the new 10.2.1.xxxx. For those I would suggest leaving it alone and enjoy the new experience. And use this radio if you are having some problems with the current one.
    But this is just 1 man's opinion in this great bit BlackBerry world we live in.


    Secret Squirreling with my Q. BBM Channel C0001FE5D/DPI Private Investigations
    moyah8 likes this.
    01-30-14 05:29 PM
  4. Icarus3000's Avatar
    Is the 1926 radio available as a .bar file? I've been reading about some people bricking their phones using the autoloader over the official .1925 OS. (apologies in advance if the bar file is already posted in this thread - I haven't read through all 25 pages yet, although I have searched for "1926 radio bar" and haven't found it yet).
    01-31-14 08:44 AM
  5. cchilderhose's Avatar
    Is the 1926 radio available as a .bar file? I've been reading about some people bricking their phones using the autoloader over the official .1925 OS. (apologies in advance if the bar file is already posted in this thread - I haven't read through all 25 pages yet, although I have searched for "1926 radio bar" and haven't found it yet).
    I used the Autoloader for the 1926 radio and all was fine. If you want the link it is on the previous page of this topic.
    01-31-14 09:30 AM
  6. Icarus3000's Avatar
    I used the Autoloader for the 1926 radio and all was fine. If you want the link it is on the previous page of this topic.
    I appreciate that you ran the autoloader without problems, but other people have claimed to have problems, and I can't afford even a small risk of bricking my phone. Should I assume that there is nor "bar" file for the 1926 radio and the autoloader is the only option?
    01-31-14 10:57 AM
  7. thurask's Avatar
    I appreciate that you ran the autoloader without problems, but other people have claimed to have problems, and I can't afford even a small risk of bricking my phone. Should I assume that there is nor "bar" file for the 1926 radio and the autoloader is the only option?
    For now, it seems that way.

    Posted via CB10
    Icarus3000 likes this.
    01-31-14 11:02 AM
  8. Foppa_21's Avatar
    I upgraded to the temporary, but official, Verizon version last week using BB Link. As noted by others, it installed the 1899 radio on my Z10. I used the STL100-4 specific 1926 radio autoloader that Thurask provided somewhere in this thread, and it worked without a problem. Some are having problems, others are not, so I wanted to be specific with what worked for me: Z10 on Verizon 10.2.1.1925 plus STL100-4 1926 radio.
    nappp and geekaren like this.
    01-31-14 11:20 AM
  9. Norg's Avatar
    Based on what I'm reading here, is it fair to conclude that the 1926 Radio works best for CDMA (verizon stl100-4) devices whereas the 1899 Radio is intended for GSM (at&t, Tmob, others) ?? Frankly I thought it was the other way around since Verizon released with the 1899 Radio file.

    I have an STL100-3 with AT&T and quite frankly I'm a little confused at which Radio is best for me !! Anyone care to chime in ??

    Posted via CB10 with my Super Snappy Z10 (STL100-3) 10.2.1.1925 on AT&T
    02-01-14 09:55 AM
  10. Azensun's Avatar
    Based on what I'm reading here, is it fair to conclude that the 1926 Radio works best for CDMA (verizon stl100-4) devices whereas the 1899 Radio is intended for GSM (at&t, Tmob, others) ?? Frankly I thought it was the other way around since Verizon released with the 1899 Radio file.

    I have an STL100-3 with AT&T and quite frankly I'm a little confused at which Radio is best for me !! Anyone care to chime in ??

    Posted via CB10 with my Super Snappy Z10 (STL100-3) 10.2.1.1925 on AT&T
    I'll chime in! Personally, I'm having much better luck with the 1926 radio.
    02-01-14 10:58 AM
  11. jelp2's Avatar
    Ive been running 1925/1926 leak combo for a while, but decided to wipe and OTA 1925 on VZ. The 1899 radio is awful, as I originally remembered and tried to update it with 1926. It didn't work, 2 blinking red lights. I reloaded OTA again and am going to try it a day or so. If the battery doesn't get better or a 1926 .bar file doesn't show up, I guess I'm going back to the leaked combo.
    02-01-14 01:02 PM
  12. huungryshark's Avatar
    With the leak 1925/1926 combo I had better experience than with the 1899 Radio . It was draining my battery too much. I'm on Vodafone Germany, maybe that's why Vodafone rejected the 10.2.1. Update? Because it was very bad with the 1899 Radio...

    Posted via the Android CrackBerry App (Z10 10.2.1.1925 /1926)
    02-01-14 01:58 PM
  13. Norg's Avatar
    I'll chime in! Personally, I'm having much better luck with the 1926 radio.
    Thanks, since you're also on AT&T, think I'll go back to 1926 as you suggest. I've only been running 1899 since I uploaded the official 1925 version via Sachesi. In fact, the 1926 Radio ran great for me too when I was running the leaked 1925 OS. Again Thanks.
    02-01-14 03:47 PM
  14. dusdal's Avatar
    Nice, this new radio in Z30STA100-2/10.2.1.1925 fixed my RFA issues.

    All seems to be well both on wifi and mobile network now.

    Thanks so much.

    Van City Coffee ; WhitecapsFC ; PreMed Community ; Bristol Rovers Football Club
    02-01-14 04:51 PM
  15. dviles's Avatar
    I don't want to throw 1926 under a bus. I only had 1899 for a couple weeks, before I ran the autoloader to upgrade to 1926 (STL 100-3). Now that I've had 1926 for a few weeks, I notice issues with various Wifi setups. At home Wifi works fine. At work. My router seems to lose connection. Just an annoyance that i'll have to figure out eventually. Otherwise, 1926 gives me no problems. I'm considering going back for a week or so, just to see if I can replicate the problem in 1899.

    Posted via CB10
    02-03-14 07:30 PM
  16. Norg's Avatar
    I don't want to throw 1926 under a bus. I only had 1899 for a couple weeks, before I ran the autoloader to upgrade to 1926 (STL 100-3). Now that I've had 1926 for a few weeks, I notice issues with various Wifi setups. At home Wifi works fine. At work. My router seems to lose connection. Just an annoyance that i'll have to figure out eventually. Otherwise, 1926 gives me no problems. I'm considering going back for a week or so, just to see if I can replicate the problem in 1899.

    Posted via CB10
    Dviles, your logic sounds good, I've been thinking of alternating myself, if only to truly confirm which Radio is best overall. Let's make it a point to compare notes every week or so !! Also, who's your carrier ??

    Posted via CB10 with my Super Snappy Z10 (STL100-3) 10.2.1.1925 on AT&T
    02-05-14 09:52 PM
  17. nycspaces.'s Avatar
    Downgraded to radio 1926 a few weeks ago after doing the 1925 leak. It provides superior phone and native data connectivity on my VZW Q10 but it has a major bug with http calls where the browser cannot connect and generates a network connection error. Only fix is a hard restart using the volume buttons.

    Posted via CB10
    02-05-14 10:17 PM
  18. heading4tomorrow's Avatar
    How do you downgrade? I see only latest radios posted above.
    02-06-14 01:15 AM
  19. jelp2's Avatar
    Downgraded to radio 1926 a few weeks ago after doing the 1925 leak. It provides superior phone and native data connectivity on my VZW Q10 but it has a major bug with http calls where the browser cannot connect and generates a network connection error. Only fix is a hard restart using the volume buttons.

    Posted via CB10
    Actually, 1926 is an upgrade from the official 1899.
    02-06-14 10:05 AM
  20. anon5993996's Avatar
    Guys is it a simple case of running the auto loader?

    I am running the official 1925 os

    Will I lose anything?

    Also am I able to revert back and how?

    Thank you.

    Posted via CB10
    02-06-14 11:33 AM
  21. anon5993996's Avatar
    Warning this bricked my phone. Z10 running official os 1925



    Posted via CB10
    02-06-14 04:35 PM
  22. anon5993996's Avatar
    After trying for hours I have managed to bring my bricked Z10 back to life.

    I would like to warn users on here that it may brick your device.

    I ran the Z10 1926 radio autoloader on my stl100-2 Z10 which is running the official 1925 OS

    It bricked my phone and it just sat there flashing red twice every second.

    Phone failed to boot, tried re running the auto loader like ten times, battery pulls, reset etc

    In the end I managed to find an old os autoloader and then have to start from scratch to bring my device back to life.

    Just thought I would warn others out there!



    Posted via CB10
    02-06-14 05:39 PM
  23. Pdinos3's Avatar
    How does this happen. I have the leaked 1925 OS installed since Dec 23. It came with 1899. When 1926 came I ran the radio autoloader. No issues. Tried 1056 radio autoloader, no issues, went back to 1926 radio, no issues. Did you sideload the radio bar file using sachesi? Or did you run the autoloader?

    Via CB10 Rogers Z30STA100-5/10.2.1.1925/1926 Radio
    02-06-14 06:14 PM
  24. anon5993996's Avatar
    How does this happen. I have the leaked 1925 OS installed since Dec 23. It came with 1899. When 1926 came I ran the radio autoloader. No issues. Tried 1056 radio autoloader, no issues, went back to 1926 radio, no issues. Did you sideload the radio bar file using sachesi? Or did you run the autoloader?

    Via CB10 Rogers Z30STA100-5/10.2.1.1925/1926 Radio
    I ran the autoloader as mentioned in the OP.

    I am running the official os 1925

    Apparently a few people running official release and using the radio auto loader has caused their phones to brick...

    Posted via CB10
    02-06-14 06:50 PM
  25. DLewis13's Avatar
    Yet that is the autoloader I used that bricked my phone.
    For now, sticking with official Verizon release, no luck with any autoloader.

    I just used the Autoloader I have for the 1926 radio and it worked fine without bricking the phone. I did take a backup before just in case but I think all is good. This is the Autoloader I used - https://mega.co.nz/#!x19ijRoT!sHsUiu...N0i11Rftb-PMYw
    02-07-14 06:48 AM
654 ... 2324252627

Similar Threads

  1. Tried to update to 10.2. No for me
    By jamiemarksberry in forum BB10 Leaked/Beta OS
    Replies: 4
    Last Post: 01-07-14, 10:04 AM
  2. BES service in Blackberry Z30?
    By Amit Karmakar in forum BlackBerry Unlocking
    Replies: 1
    Last Post: 01-07-14, 08:25 AM
  3. Bb 10.2.1 update for z10
    By naji55 in forum BlackBerry 10 OS
    Replies: 5
    Last Post: 01-07-14, 08:24 AM
LINK TO POST COPIED TO CLIPBOARD