02-14-14 07:17 AM
654 ... 1819202122 ...
tools
  1. MobileMadness002's Avatar
    BB10_2_1.1926_RDIO_Z_Series_2_3_4 maybe you can try this one bro

    Posted via CB10

    Was a botched flash on my end, the file was/is correct and eventually worked as it should, thanks for the new radio though. appreciate the gesture.
    Uzi likes this.
    01-12-14 09:12 AM
  2. jyates's Avatar
    http://l.bitcasa.com/iaOrSJhH try using this cap 55 by thurask

    Posted via CB10
    Thank you for the advice cap55 did the trick and worked first time. Thanks again.
    Uzi likes this.
    01-12-14 02:38 PM
  3. ArtilesGabriel's Avatar
    i got an issue after loaded a 1926 radio. When the device running normally it shows me a 3G or H+, but when i went to inside a building suddenly my signal goes to Emergency call only. The thing is, it still running with Emergency call only even i've already get out of the building and i should restart my device to get back in normal. What's wrong ? i thought there is no matter with my carrier. My friend used the same carrier, but there is no problem or probably he didn't load the 1926 radio. Idk, if i try to reinstall the 1925 leak OS with 1899 radio probably it will be better then 1926 lol.
    atlac likes this.
    01-13-14 12:02 AM
  4. pcuser's Avatar
    i got an issue after loaded a 1926 radio... when i went to inside a building suddenly my signal goes to Emergency call only. The thing is, it still running with Emergency call only even i've already get out of the building and i should restart my device to get back in normal. What's wrong ?
    This is one thing I notice about the 1926. It is slow in relinquishing Mobile Network signal, so I can still get one to two bars in areas which were dead spots for previous radio files; because the 1926 doesn't seem to want to let go. Its disadvantage is also with the slowness in which the 1926 acquires signal when it loses it. I had to turn the Mobile Network off and then on in more than one occasion to get the signal back. Some users swear by the 1056. You can try it.
    01-13-14 07:16 AM
  5. JRF_1986's Avatar
    i got an issue after loaded a 1926 radio. When the device running normally it shows me a 3G or H+, but when i went to inside a building suddenly my signal goes to Emergency call only. The thing is, it still running with Emergency call only even i've already get out of the building and i should restart my device to get back in normal. What's wrong ? i thought there is no matter with my carrier. My friend used the same carrier, but there is no problem or probably he didn't load the 1926 radio. Idk, if i try to reinstall the 1925 leak OS with 1899 radio probably it will be better then 1926 lol.
    I haven't had this issue yet. Installed it Saturday morning and it's been working like a charm. Have you tried reloading it?

    Posted via CB10 on my Q10
    01-13-14 09:11 AM
  6. koolaje's Avatar
    In my STL100-1, this radio version actually made my voice crakle during BBM voice sessions (so when I speak, there's a cracking noise coming out from the phone, but the other end received my voice clearly). Changing back to 1056 fixed it so not sure if it's a botch install or the radio itself.
    01-13-14 09:29 AM
  7. nappp's Avatar
    Anyone having issues sending long texts? If I use the full character limit or one that is split into two texts it won't go through

    Posted via CB10
    01-13-14 11:01 AM
  8. Josh_Gooner's Avatar
    Think I might have to revert to 1829 radio as this one seems to have a worse battery life.

    Posted via CB10
    01-13-14 12:05 PM
  9. PatrickMJS's Avatar
    I've got the 1925 OS and the 1926 radio... been set up like this for about a week.

    Not one problem.

    All my phone calls are good.

    All texts have been good, including the history which pops up quickly.

    Like I said, working beautifully. Really sweet. Love Snap! Wow.

    Posted via CB10
    Pdinos3 likes this.
    01-13-14 02:27 PM
  10. jamesmcp5's Avatar
    I installed 1926 radio and now my z10 network carrier doesnt work

    Z10 STL100-1 on 10.2.1.1925
    01-13-14 04:51 PM
  11. MobileMadness002's Avatar
    I installed 1926 radio and now my z10 network carrier doesnt work

    Z10 STL100-1 on 10.2.1.1925
    My first flash with the radio failed sort of and had to do it a second time. Incidentally, the first time flashed 1 time, the second flashed 2 times. Go ahead and reflash the radio. Won't hurt any.
    01-13-14 05:12 PM
  12. jamesmcp5's Avatar
    i flashed a secod time and now works great thank you
    01-13-14 05:46 PM
  13. nappp's Avatar
    I will try this as well. I'm perfect except for the long text bug

    Sent from an ATM
    No trees were harmed during the making of this message
    01-13-14 05:52 PM
  14. ArtilesGabriel's Avatar
    I haven't had this issue yet. Installed it Saturday morning and it's been working like a charm. Have you tried reloading it?

    Posted via CB10 on my Q10
    I'll try it.

    Blackberry Z10STL100-2 | 10.2.1.1925 | XL Axiata | 2ABD91CA
    01-13-14 06:37 PM
  15. AaDaa's Avatar
    My answer in 1 of the thread..will try it..

    Thank you SirJes n Bla1ze
    01-13-14 06:45 PM
  16. AaDaa's Avatar
    STL100-1 Z10 Compliments of Bla1ze
    https://mega.co.nz/#!XgpyQAAA!ZUNISA...8Oipn9ocTMIubk

    Is this sideloader? Or full autoloader?
    01-13-14 07:02 PM
  17. Uzi's Avatar
    STL100-1 Z10 Compliments of Bla1ze
    https://mega.co.nz/#!XgpyQAAA!ZUNISA...8Oipn9ocTMIubk

    Is this sideloader? Or full autoloader?
    autoloader

    Posted via CB10
    01-13-14 07:07 PM
  18. AaDaa's Avatar
    autoloader

    Posted via CB10
    Thanks for confirming.. will try it..
    01-13-14 07:09 PM
  19. jamesmcp5's Avatar
    Why now i cant se the software version? Is that bad?


    1926 Radio For Q10/5. Z10 1/2/3/4 / Z30-img_20140113_192110.png

    Z10 STL100-1 on 10.2.1.1925
    01-13-14 07:36 PM
  20. tickerguy's Avatar
    My Zed went into the "no sleep" mode again this afternoon on LTE service. It was clearable with Airplane mode -- this is the first misbehavior in a week, but it is of note....
    Rudy Kruger likes this.
    01-13-14 07:39 PM
  21. Pdinos3's Avatar
    Why now i cant se the software version? Is that bad?


    Click image for larger version. 

Name:	IMG_20140113_192110.png 
Views:	1335 
Size:	84.8 KB 
ID:	238396

    Z10 STL100-1 on 10.2.1.1925
    No its not bad. Some devices take time for it to show up. Some never show up. Makes no difference. Don't worry

    Via CB10 Rogers Z30STA100-5/10.2.1.1925/1926 Radio
    01-13-14 07:46 PM
  22. icecoldstew's Avatar
    Ive been having trouble receiving calls with the last 2 leaks(1055, 1925). I can call out just fine, just sometimes I wont be able to receive. Ive been told that its sending them straight to my voicemai even when I have all bars. Also receiving text late, like hours late. Anybody ever experience or know someone who has experienced this? Really annoying, I have a Q10 with Tmobile.
    01-13-14 07:54 PM
  23. nappp's Avatar
    Hello everyone. As an experiment I have gone back to the 1899 radio. Text issue still remains so it must be a combination of Sprint, the 1925 OS, and my location. Not a big deal, I will be happy as is. My question to everyone is I only get the Blackberry symbol in the upper right corner on the 1899 radio. Functions just the same, but no symbol which is supposedly connecting to the BB infostructure. Any ideas or information on that? Realistically do I even care?

    Thanks everyone

    Sent from an ATM
    No trees were harmed during the making of this message
    Last edited by nappp; 01-13-14 at 09:27 PM.
    01-13-14 09:06 PM
  24. jamesmcp5's Avatar
    Thank you man

    Z10 STL100-1 on 10.2.1.1925
    01-13-14 09:17 PM
  25. HotFix's Avatar
    followed instructions... everything seemed ok until the led light went from green to a constantly flashing red light. with the black screen. any advice ya'll?
    I decided since my workspace got removed last week that I would finally try my hand at flashing my device, and started with this radio. I too ran into the exact scenario where the light would flash red but the system was unresponsive to buttons after the auto-loader finished.

    I tried two different Z10 auto-loaders on this thread with no luck. Battery pulls did not resolve the issue and right now I am reloading my OS to bring the unit back into operation.

    About the only thing that I think might be different from my 10.2.1925 OS and the rest of you is I got mine from the BES 10.2 BETA (through my former work) and not through a leak. I don't know if that would have made a difference, but its the only thing I can think of since no one else but justkonyen and I have seemed to have this issue.
    01-14-14 10:42 AM
654 ... 1819202122 ...

Similar Threads

  1. Tried to update to 10.2. No for me
    By jamiemarksberry in forum BB10 Leaked/Beta OS
    Replies: 4
    Last Post: 01-07-14, 10:04 AM
  2. BES service in Blackberry Z30?
    By Amit Karmakar in forum BlackBerry Unlocking
    Replies: 1
    Last Post: 01-07-14, 08:25 AM
  3. Bb 10.2.1 update for z10
    By naji55 in forum BlackBerry 10 OS
    Replies: 5
    Last Post: 01-07-14, 08:24 AM
LINK TO POST COPIED TO CLIPBOARD