04-22-17 11:05 AM
505 ... 1617181920 ...
tools
  1. shifterdude647's Avatar
    Just installed on Z10 locked to Wind! Works great, thanks OP!!
    03-21-15 02:36 AM
  2. dilsayess's Avatar
    its great but hotspot is not working in these updation .only 10.3.1.1152 is working gud for hotspot. any one try this its working or not in theses new updation.............
    03-21-15 05:20 AM
  3. blackbird666's Avatar
    It still connects the truth is it is blinking green when autoloader is running but after 100% is done the auto loader will just close and my led will turn Red for a while and it will gone



    If it is blinking green when the autoloader connects that means your phone is alright but the Software (Autoloader) you are using might be the one causing the ISSUE, Just as WITHDRAWL said !
    03-21-15 06:53 AM
  4. pghrox18's Avatar
    Hi all. I am green green green when it comes to Blackberry OS upgrades so please bare with me...

    My Q10 is Enterprise Activated so I have my Personal and Work partitions. Will I be ok if I use Sachesi to upgrade to 10.3.1.2582? Or will it screw up my Enterprise activation?

    Thanks!
    Stef,
    I have done many upgrades using Sachesi and I am Enterprise activated. Upgrades leave all settings in tact. The upgrade is quick and smooth. Reboot a couple times over the course of the first few hours seems to help the new OS settle in quicker. This version with the radio seems to be the best I've tried since going to 10.3.1. Nice job, BlackBerry!

    VZN Z30 STA100-3/10.3.1.2558/.2559
    03-21-15 07:08 AM
  5. geodorn's Avatar
    its great but hotspot is not working in these updation .only 10.3.1.1152 is working gud for hotspot. any one try this its working or not in theses new updation.............
    No problems at all with Mobile Hotspot here in 10.3.1.2582

    posted via CB10 on a Classic
    03-21-15 08:00 AM
  6. Bossque's Avatar
    What is flickering issue? Tnx!
    03-21-15 11:14 AM
  7. JCMM's Avatar
    What is flickering issue? Tnx!
    I am experiencing some flickering on my screen, its a problem rendering the image, it flashes quickly. This thing never happened to me before, i've downgraded my Z10 back to .2243 but i'm still experiencing it. Maybe because i restored a backup i did when i was running 2582. Can someone confirm that the problem relies on the backup i did?
    Last edited by JCMM; 03-21-15 at 12:14 PM.
    03-21-15 12:00 PM
  8. Khurram Murad's Avatar
    I have successfully installed OS 10.3.1.2582 on my q10.
    I want to know that will I be able to get official OTA updates after the release of 10.3.1.2582?
    or I have to get back to official release ????

    please replygtfdcx
    03-21-15 12:05 PM
  9. kbz1960's Avatar
    I have successfully installed OS 10.3.1.2582 on my q10.
    I want to know that will I be able to get official OTA updates after the release of 10.3.1.2582?
    or I have to get back to official release ????

    please replygtfdcx
    You'll get them as they will be a higher number than what is installed.
    03-21-15 12:07 PM
  10. Pdinos3's Avatar
    I have successfully installed OS 10.3.1.2582 on my q10.
    I want to know that will I be able to get official OTA updates after the release of 10.3.1.2582?
    or I have to get back to official release ????

    please replygtfdcx
    This is an OFFICIAL release. Not a leak. Just a different way of receiving it and installing it. That's all

    Via CB10 PassportSQW100-1/10.3.1.2582 
    03-21-15 01:35 PM
  11. thedhruvsoni's Avatar
    Installing Now And Should I Will Able To Receive Further Updates
    ???
    Z10 STL100-3 Factory Unlocked India
    03-21-15 02:33 PM
  12. KorChi_JapThai's Avatar
    Installing Now And Should I Will Able To Receive Further Updates
    ???
    Z10 STL100-3 Factory Unlocked India
    Yes you wil

    БLДКБЭЯЯУ PДSSPФЯT 10.3.1.2582
    03-21-15 02:52 PM
  13. thedhruvsoni's Avatar
    Yes you wil

    БLДКБЭЯЯУ PДSSPФЯT 10.3.1.2582
    Thanks For Reply !!!
    03-21-15 02:56 PM
  14. Pdinos3's Avatar
    Thanks For Reply !!!
    The answer was just two above your's. Just sayin


    10.3.1.2582 live links-img_20150321_160733.png

    Via CB10 PassportSQW100-1/10.3.1.2582 
    03-21-15 03:08 PM
  15. kayuz6's Avatar
    You'll get them as they will be a higher number than what is installed.
    i tried but I don't receive any updates via ota
    03-21-15 05:03 PM
  16. chyked's Avatar
    Yikes, thanks all. I have installed 10.3.1.2582 on my Z10 Stl 100-4. It is working smoothly.

    Posted via CB10
    03-21-15 11:27 PM
  17. KrinnerSA's Avatar
    Still have an issue in the picture editor, ie enhance / frames etc.....the toolbar is sticky, any suggestions?

    BlackBerry Z30 / BlackBerry OS 10.3.1.2558
    03-22-15 12:25 AM
  18. Khurram Murad's Avatar
    sir i'm on q10 with BB OS 10.1.3.2582 leak.
    At first 2 days notification volume works good then today I noticed it went low as it was after OTA 10.3.1.1565 update.
    please help me.
    03-22-15 10:24 AM
  19. anon(9208252)'s Avatar
    sir i'm on q10 with BB OS 10.1.3.2582 leak.
    At first 2 days notification volume works good then today I noticed it went low as it was after OTA 10.3.1.1565 update.
    please help me.
    Try a hard reset, you should probably do a couple after an update.
    03-22-15 11:17 AM
  20. Khurram Murad's Avatar
    I have already lost my data. And I don't want to lose it all in future. Actually I don't want to go through this phase of hard reset.
    Should I reload 10.2 via BlackBerry Link? And then update to 10.3.1 and after then 2MB update of 10.3.1.2558??? After then I keep my device only on official OTA. Will it be possible to avoid hard reset type of things that completely losing data even BlackBerry Link's backup and restore do not restore the device as it was before. Please help me. I really want to be permanently on stable and bug free BlackBerry OS. Thanks in advance.

    Posted via CB10
    03-22-15 01:02 PM
  21. Khurram Murad's Avatar
    Any other solution other than hard reset???

    Posted via CB10
    03-22-15 01:04 PM
  22. Pdinos3's Avatar
    Any other solution other than hard reset???

    Posted via CB10
    Hard reset means hold the power button down until the device reboots. You will not lose anything.

    Oh I just noticed you are on a q10. Try the fix here:

    http://www.blackberry.com/btsc/KB36747

    Via CB10 PassportSQW100-1/10.3.1.2582 
    03-22-15 01:26 PM
  23. anon(9208252)'s Avatar
    Any other solution other than hard reset???

    Posted via CB10
    A hard reset does not do anything with your data or contents on your phone it just refreshes it like in the same way you do your pc,

    Press and HOLD bothvol Up/Down buttons. Keep holding while the screen goes fully black (ignore thescreenshot), keep holding through the Black/White logo and when the ColoredLogo shows up, release those buttons.

    For the Z10: If youhave the STL100-1 variant the volume button reset method doesn't work. In thatcase, Press and HOLD the Power On Button until you see the LOGO as above
    03-22-15 01:26 PM
  24. Rihat's Avatar
    I could not receive 10.3 os on my blackberry z10 please help me am from India

    Posted via CB10
    03-22-15 04:26 PM
  25. geodorn's Avatar
    I could not receive 10.3 os on my blackberry z10 please help me am from India
    The sense of this thread is to provide 10.3.1.2582 for everyone, everything you need is in the first post of this thread.

    posted via CB10 on a Classic
    03-22-15 04:35 PM
505 ... 1617181920 ...

Similar Threads

  1. Replies: 33
    Last Post: 06-27-15, 03:19 AM
  2. New update 10.3.1.1779 for all blackberry dvices..
    By snoop tiger in forum General BlackBerry Discussion
    Replies: 29
    Last Post: 03-22-15, 04:20 PM
  3. How can I get the BlackBerry os 10.3.1 for my Z10 stl100-1?
    By Paul Mndima in forum BlackBerry 10 OS
    Replies: 8
    Last Post: 03-17-15, 05:10 AM
  4. Minor bug in 10.3.1
    By vhl71 in forum BlackBerry Z30
    Replies: 2
    Last Post: 03-16-15, 02:32 PM
  5. BlackBerry OS 10.3.1.2576 update files now available for download
    By CrackBerry News in forum CrackBerry.com News Discussion
    Replies: 0
    Last Post: 03-16-15, 01:30 PM
LINK TO POST COPIED TO CLIPBOARD