01-19-15 07:58 AM
676 ... 2223242526 ...
tools
  1. Saravanan Arumugam's Avatar
    Were to download, leak for BlackBerry passport? The link seems broken. Appreciate if anyone can help me on this.

    PassportSQW100-1/10.3.1.1016

    Posted via CB10
    11-19-14 03:03 AM
  2. Zorro4X4's Avatar
    Were to download, leak for BlackBerry passport? The link seems broken. Appreciate if anyone can help me on this.

    PassportSQW100-1/10.3.1.1016

    Posted via CB10
    Ever noticed the first post? Try this link from Thurask

    https://drive.bitcasa.com/send/2H1RJ...2-bO8oX_oGU4KC

    Posted via CB10 from my BlackBerry Passport
    11-19-14 03:31 AM
  3. Saravanan Arumugam's Avatar
    That link shows me error. Not sure why I tried that already

    Posted via CB10
    11-19-14 05:27 AM
  4. santhoshmanikandan's Avatar
    That link shows me error. Not sure why I tried that already

    Posted via CB10
    Working for me
    Attachment 315424

    Z10STL100-1/10.3.1.1151
    11-19-14 05:37 AM
  5. murali56090's Avatar
    I am able to install now... Sachesi corrected "error-authorisation" authomatically and device memory was recognised, finally after many trials.
    Radio and Core OS already installed so there are 199 apps to install. Few apps are taking 45 or more for installing and few took very less time.
    The issue is my mobile is getting disconnected in between this process, happened couple of times and delaying the process.
    Was able to install about 70 appls last night .. took around 6 hours or more.

    Is this the general upgrade process or am I the one having issues ?
    11-19-14 05:50 AM
  6. adrimaxi's Avatar
    Is the autoloader mentioned in1st post for z30 STA100-1 also works for z30 STA100-2? Thanks regards

    Posted via CB10
    11-19-14 08:13 AM
  7. shorski's Avatar
    Is the autoloader mentioned in1st post for z30 STA100-1 also works for z30 STA100-2? Thanks regards

    Posted via CB10
    Yes. All z30 models use the same autoloader.

    Sent from my Z30 using Tapatalk
    11-19-14 08:34 AM
  8. Saravanan Arumugam's Avatar
    all the mega links are not openning for me.

    Also the link which you had shared is Autoloader ?
    11-19-14 08:40 AM
  9. matorix's Avatar
    I believe that quoted post, originally posted by r0v3tT3N, which is on the page one of this topic, contains all Autoloaders...

    Sent from my Q5 using Tapatalk
    11-19-14 09:16 AM
  10. eywong's Avatar
    Did all that. Soft and hard reset. Nobody else has this issue ? Cuz when I did my stl 100-3 I had no probs at all
    I have that issue (i.e., BB Link says setup is incomplete) on my Z10STL-3. It started only yesterday (BTW, my first significant issue after I upgraded to 10.3.1.1151 on 14 Nov).

    Running "oobe://" does not resolve the issue for me. My Z10 declares "setup complete." However, BB Link (ver 1.2.4.24) continues to direct me to complete device setup no matter how many times I complete the setup of my Z10.

    I would appreciate all suggestions (especially, any that would lead to final resolution of this issue). Thank you in advance. Meanwhile, I will continue to look for answers in the OS 10.3.1.1151 Fixes & Findings and OS 10.3.1.1016 Fixes & Findings threads.

    Z10STL100-3/10.3.1.1151 (upgraded from 10.3.1.1016)
    Last edited by eywong; 11-19-14 at 10:40 AM.
    11-19-14 10:21 AM
  11. Ertank's Avatar
    Did all that. Soft and hard reset. Nobody else has this issue ? Cuz when I did my stl 100-3 I had no probs at all
    Run browser. Go to oobe:// it will ask you to run initial setup. Run and complete it. In my STL100-1 I have to battery pull for real initial setup to start. Some people did hard reset (hold power button long enough to reset).
    11-19-14 01:56 PM
  12. Kris Simundson's Avatar
    I have that issue (i.e., BB Link says setup is incomplete) on my Z10STL-3. It started only yesterday (BTW, my first significant issue after I upgraded to 10.3.1.1151 on 14 Nov).

    Running "oobe://" does not resolve the issue for me. My Z10 declares "setup complete." However, BB Link (ver 1.2.4.24) continues to direct me to complete device setup no matter how many times I complete the setup of my Z10.

    I would appreciate all suggestions (especially, any that would lead to final resolution of this issue). Thank you in advance. Meanwhile, I will continue to look for answers in the OS 10.3.1.1151 Fixes & Findings and OS 10.3.1.1016 Fixes & Findings threads.

    Z10STL100-3/10.3.1.1151 (upgraded from 10.3.1.1016)
    Try uninstalling than reinstalling link

    Posted via the Z to the 3 to the 0
    11-19-14 02:16 PM
  13. eywong's Avatar
    Try uninstalling than reinstalling link
    Thanks, Kris. I had already done that and it didn't resolve my issue. BB Link v1.2.3.56 (and Sachesi 2.0.0 RC) was working fine with my Z10 10.3.1.1151 since 14 Nov. This issue seems to have spontaneously cropped up for me on the 17th.

    BB Link, PC drivers, etc. probably are not the direct cause of the issue. When I connect my Z10, via USB, to my PC, it is BB Device Manager that says my device's setup is incomplete. If I could determine what info BBDevMgr lacks, I might be able to resolve the issue. It's unfortunate for me that more people are not affected by this. Then, the CB brain trust might put more effort into trying to find an answer.

    Apparently, RIM revoked access to the .1151 production software on the 17th. It may be a strange coincidence that I started having this issue around the same time frame.
    11-19-14 03:42 PM
  14. ElyHawk's Avatar
    Howdy folks

    How come when I run Sanchesi (even for Passport), the most recent version it shows is 10.3.0.1418 instead of 10.3.1.1151?

    Thanks, ElyHawk
    11-19-14 04:03 PM
  15. RoseBud68's Avatar
    Cause these are leaks OS and Not Official OS.
    11-19-14 04:10 PM
  16. ElyHawk's Avatar
    My impression is that the current leak is 10.3.1.1151 but that isn't what Sachesi coughs-up...
    11-19-14 04:13 PM
  17. Kris Simundson's Avatar
    Thanks, Kris. I had already done that and it didn't resolve my issue. BB Link v1.2.3.56 (and Sachesi 2.0.0 RC) was working fine with my Z10 10.3.1.1151 since 14 Nov. This issue seems to have spontaneously cropped up for me on the 17th.

    BB Link, PC drivers, etc. probably are not the direct cause of the issue. When I connect my Z10, via USB, to my PC, it is BB Device Manager that says my device's setup is incomplete. If I could determine what info BBDevMgr lacks, I might be able to resolve the issue. It's unfortunate for me that more people are not affected by this. Then, the CB brain trust might put more effort into trying to find an answer.

    Apparently, RIM revoked access to the .1151 production software on the 17th. It may be a strange coincidence that I started having this issue around the same time frame.
    That's a interesting problem, and I'm going to assume you've done the obvious hard reset on device,

    So that just leaves BBDevMgr either A) not reading the pin properly or B) it's just straight up being stupid.

    Another obvious question, but have you tried other use cables/ports? (sorry if it's been asked before, not really reading back through the pages, so trying to eliminate the obvious)

    Posted via the Z to the 3 to the 0
    11-19-14 04:24 PM
  18. eywong's Avatar
    That's a interesting problem, and I'm going to assume you've done the obvious hard reset on device,
    I have reset the device a multitude of times in each of several ways: hold down the power button until reset; hold down power button, then tap reset; hold down both volume keys; pull battery. The "setup complete" state seems to never be achieved.

    So that just leaves BBDevMgr either A) not reading the pin properly or B) it's just straight up being stupid.
    And/or, C) some failure on the device's side; D) failure in the communication link (i.e., USB cable).

    Another obvious question, but have you tried other use cables/ports? (sorry if it's been asked before, not really reading back through the pages, so trying to eliminate the obvious)
    I tried other cables, ports, devices. I do not suspect cables and ports at this time.

    You may freely ask any questions. It's a good brainstorming technique.
    11-19-14 05:09 PM
  19. eywong's Avatar
    How come when I run Sanchesi (even for Passport), the most recent version it shows is 10.3.0.1418 instead of 10.3.1.1151?
    I think RIM rescinded the links to 10.3.1.1151 about 17 Nov.
    11-19-14 05:12 PM
  20. Kris Simundson's Avatar
    I have reset the device a multitude of times in each of several ways: hold down the power button until reset; hold down power button, then tap reset; hold down both volume keys; pull battery. The "setup complete" state seems to never be achieved.

    And/or, C) some failure on the device's side; D) failure in the communication link (i.e., USB cable).

    I tried other cables, ports, devices. I do not suspect cables and ports at this time.

    You may freely ask any questions. It's a good brainstorming technique.
    Well based on these answers we can eliminate use cables so quite possibly the device software. Possibly try a security wipe or even reload a older OS to see if it's device side

    Posted via the Z to the 3 to the 0
    11-19-14 05:26 PM
  21. ElyHawk's Avatar
    I'm sure you are right; but by then, I thought the data had been housed at alternate sites...
    11-19-14 05:40 PM
  22. eywong's Avatar
    I'm sure you are right; but by then, I thought the data had been housed at alternate sites...
    Correct. However, I tried to explain why (my guess) Sachesi no longer shows 10.3.1.1151 being available.
    ElyHawk likes this.
    11-19-14 07:32 PM
  23. eywong's Avatar
    Well based on these answers we can eliminate use cables so quite possibly the device software. Possibly try a security wipe or even reload a older OS to see if it's device side
    I would like to avoid experimentation with any "destructive" methods on my phone to try to resolve my issue. Hopefully, someone will discover a sure fix. In any case, I think I will wait until the "official" 10.3.1 becomes available and then I will use Link to reset my device to factory settings and load software. Thanks for your interest and help.
    11-19-14 07:58 PM
  24. NewFordOrder's Avatar
    Is there an autoloader for Z10 STL100-4 (Verizon)?
    11-20-14 03:24 PM
  25. Pdinos3's Avatar
    Is there an autoloader for Z10 STL100-4 (Verizon)?
    First post. Where it says all devices, courtesy of Thurask. There's a bitcasa link that has all autoloaders, including stl100-4. How are people missing this?

    Via CB10 Runnin PassportSQW100-1/10.3.1.1151 Proud Member of the Peevishlicious Crew
    moody and NewFordOrder like this.
    11-20-14 03:32 PM
676 ... 2223242526 ...

Similar Threads

  1. Replies: 14
    Last Post: 02-20-15, 07:37 PM
  2. Smaller version of Blackberry Passport?
    By Christian Sianturi in forum BlackBerry Passport
    Replies: 14
    Last Post: 11-17-14, 03:59 AM
  3. how to make an autoloader?
    By ahmad habib in forum Ask a Question
    Replies: 6
    Last Post: 11-15-14, 08:30 PM
  4. Blackberry WIFI not working on my Blackberry Curve 8900?
    By CrackBerry Question in forum Ask a Question
    Replies: 0
    Last Post: 11-15-14, 08:14 PM
  5. Blackberry Assistant + Convenience Key = Win??
    By yohannrjm in forum BlackBerry 10 OS
    Replies: 2
    Last Post: 11-15-14, 08:07 PM
LINK TO POST COPIED TO CLIPBOARD