01-19-15 07:58 AM
676 ... 1112131415 ...
tools
  1. Ertank's Avatar
    Not sure if anyone noticed, but swipe to wake works like normal again. Instead of the swipe skipping past the lock screen, it now pauses at lock screen and then you swipe again to get back to home screen. I'm glad this is back to normal, as it prevents an pocket activities from happening randomly...like pocket pool.
    If there is an application running in the front when phone went sleep. It pauses on the lock screen, yes. If it was home screen when phone went to sleep. Swipe directly takes you to home skipping lock screen.
    Mecca EL likes this.
    11-15-14 03:43 AM
  2. akOnalangBFmo's Avatar
    Is there still a lag while pressing the screen on boot screen?
    11-15-14 03:44 AM
  3. Thrace Ist's Avatar
    How to use the files posted in the first post of this thread?

    Following the steps below you can upgrade to 10.3.1.1151 non-destructively, so you won't lose any data on your device and do not have to start from scratch.
    It's like doing an OTA update on your device.

    Note that this tutorial is assuming that you are using Windows and have the latest version of BlackBerry Link installed.

    Before you do anything backup your device with BlackBerry Link.
    Do a full backup!
    If something goes wrong you can easily go back to your current OS and restore your backup.

    Backup made?
    Then close BlackBerry Link and proceed:

    1)
    Install the latest version of Sachesi
    Currently 2.0.0 RC from here
    https://github.com/xsacha/Sachesi/releases

    2)
    Download the 3 leaked files for your device:
    Radio
    Core OS
    Debrick
    from the first post of this thread.
    Make sure that you download the proper files for your device, in this example it is a Z10-STL100-2

    The smallest file is the Radio and looks like:
    qc8960-10.3.1.1152-nto+armle-v7+signed.bar

    The biggest file is the Debrick and looks like:
    qc8960.factory_sfi.desktop-10.3.1.1151-nto+armle-v7+signed.bar

    The third file is the Core OS and looks like:
    qc8960.factory_sfi-10.3.1.1151-nto+armle-v7+signed.bar

    3)
    Create a folder on your hard drive
    Name it as the OS you have downloaded, e.g.
    10.3.1.1151

    4)
    Create a second folder on your hard drive
    Name it
    10.3.1.1151 Debrick

    5)
    Put the Core OS and the Radio in your 10.3.1.1151 folder

    6)
    Put the Debrick file (the biggest one) in your 10.3.1.1151 Debrick folder

    7)
    Open Sachesi
    You do not have to connect your device yet
    Just open Sachesi and click the tab Extract

    Click the Extract Signed button and select the big Debrick file from your 10.3.1.1151 Debrick folder

    You' ll see a progress bar running, wait till the process is finished.

    In your 10.3.1.1151 Debrick folder is now a second even bigger file which looks like:
    qcfm.image.com.qnx.qcfm.qc8960.factory_sfi.desktop .BB10_3_1.1151.798331.signed

    In Sachesi click on the Extract Apps button and selct this new big .signed file from your 10.3.1.1151 Debrick folder

    You' ll see again a progress bar running, wait till the process is finished.

    In your 10.3.1.1151 Debrick folder is now a subfolder which looks like:
    qcfm.image.com.qnx.qcfm.qc8960.factory_sfi.desktop .BB10_3_1.1151.798331

    Open this folder and copy all files in your formely created 10.3.1.1151 folder (where you put the Core OS and the Radio before)

    8)
    Now put your device in airplane mode and connect it via USB
    If you have set a password on your device enter it.
    Click the Install tab
    Leave the checkmark "Only install newer apps" checked
    Click the Install Folder button and select your 10.3.1.1151 folder
    You will see a progress circle, be patient this will take some time

    9)
    Your device restarts, first boot may take some time

    10)
    Congratulations, you are now running 10.3.1.1151

    11)
    Donate to xsacha for providing the excellent Sachesi software:
    Qtness Development Working on Qt apps
    Worked like a charm
    11-15-14 03:51 AM
  4. jevinzac's Avatar
    Am I the only one having issues with downloading files from bitcasa? When I click on the Q10 link, nothing happens, I tried removing the cache, reloading the webpage, hard resetting the phone but nothing. I am not able to get the pop up menu to download and save the Q10 OS. Please help?
    I don't want to use mega or any other. I want bitcasa to work

    Posted via CB10
    11-15-14 03:55 AM
  5. yhamaie's Avatar
    I have just updated the device software of my Passport . . . non-destructively.

    10.3.1.1151 BlackBerry Links and Autoloaders-img_20141115_181507.png

    Posted via CB10
    11-15-14 04:18 AM
  6. VIP30's Avatar
    Love this suit...
    10.3.1.1151 BlackBerry Links and Autoloaders-img_20141115_172816.png

    ODIN 9520 / 5.0.0.1743 Hybrid / 1850mAh
    11-15-14 04:35 AM
  7. The Genius's Avatar
    Excellent work guys, but I think I'm going to wait for an official now, flash doesn't work and it's a bit of a pain.

    Posted via CB10 from my Z30STA100-2/10.3.1.1016
    11-15-14 05:04 AM
  8. mendez777's Avatar
    here we go!!!

    Posted via CB10
    11-15-14 05:04 AM
  9. thurask's Avatar
    Okay, Bitcasa links SHOULD work now.
    11-15-14 05:16 AM
  10. Legal Eagle's Avatar
    Excellent work guys, but I think I'm going to wait for an official now, flash doesn't work and it's a bit of a pain.

    Posted via CB10 from my Z30STA100-2/10.3.1.1016
    Official or leak, Flash is gone, better get used to the idea.
    bungaboy, GPuba and Mecca EL like this.
    11-15-14 05:25 AM
  11. Chris Degroote's Avatar
    Excellent work guys, but I think I'm going to wait for an official now, flash doesn't work and it's a bit of a pain.

    Posted via CB10 from my Z30STA100-2/10.3.1.1016
    Please stop asking for Flash, it won't come back.

    Posted with my rocking Z10 STL 100-2
    GPuba, Mecca EL and BDLIVE4463 like this.
    11-15-14 05:30 AM
  12. Jamal Abuhijleh's Avatar
    hello , dunno if it the right place to ask this ,, but is there a guide how to install this os !! before it was very easy ,, just 1 link to autoloader , plug in and finish !! now i see alot of links , dubrik - core os - radio files ,, what to do with all these ?

    can someone help me understand these ,, thx
    11-15-14 05:47 AM
  13. crmabbitt's Avatar
    make my own miror archive with allallall bars 1151 (=

    Archive 10.3.1.1151

    11-15-14 05:48 AM
  14. BlueSky2008's Avatar
    Please share file "sys.android-10.3.1.145" for me
    11-15-14 05:59 AM
  15. JamieWilson01's Avatar
    Passport mirror


    https://mega.co.nz/#!lIQSDZgY!vqa9YR...C1lfBaKKYQZdvs

    Via CB10 from Scotland using PassportSQW100-1/10.3.1.1151
    11-15-14 06:05 AM
  16. RAYHER's Avatar
    Good morning.
    I can not install non-destructive with SACHESI.
    There is not enough space to install.
    I have the same files in device that previous installation 10.3.1.1016
    I've been installing leaks since I have STL100-1 and it never happened to me.
    Any help?.
    Thank you.
    11-15-14 06:08 AM
  17. crmabbitt's Avatar
    Please share file "sys.android-10.3.1.145" for me
    http://forums.crackberry.com/bb10-le...l#post11080602
    11-15-14 06:10 AM
  18. KorChi_JapThai's Avatar
    anyone having an issue for Z3? tempting to load this 1151 on my z3.
    Last edited by KorChi_JapThai; 11-25-14 at 06:10 AM.
    11-15-14 06:32 AM
  19. Kamika007z's Avatar
    Thanks for the birthday wishes and also to all that took time and bandwidth to upload the autoloaders, it is very much appreciated !

    Posted via CB10
    Thank you all involved with this as well and HAPPY BIRTHDAY jon4400!
    Mecca EL likes this.
    11-15-14 06:45 AM
  20. willowbeast's Avatar
    Thank you

    Posted via CB10
    11-15-14 06:49 AM
  21. xsacha's Avatar
    7)
    Open Sachesi
    You do not have to connect your device yet
    Just open Sachesi and click the tab Extract

    Click the Extract Signed button and select the big Debrick file from your 10.3.1.1151 Debrick folder

    You' ll see a progress bar running, wait till the process is finished.

    In your 10.3.1.1151 Debrick folder is now a second even bigger file which looks like:
    qcfm.image.com.qnx.qcfm.qc8960.factory_sfi.desktop .BB10_3_1.1151.798331.signed

    In Sachesi click on the Extract Apps button and selct this new big .signed file from your 10.3.1.1151 Debrick folder
    Just a note that this is redundant in latest version.
    You can Extract Apps directly from the debrick file.
    bungaboy, Mecca EL, moody and 1 others like this.
    11-15-14 07:02 AM
  22. BAD FIRE's Avatar
    any autoloaders for z10 stl 100-4?
    11-15-14 07:18 AM
  23. willowbeast's Avatar
    How to use the files posted in the first post of this thread?

    Following the steps below you can upgrade to 10.3.1.1151 non-destructively, so you won't lose any data on your device and do not have to start from scratch.
    It's like doing an OTA update on your device.

    Note that this tutorial is assuming that you are using Windows and have the latest version of BlackBerry Link installed.

    Before you do anything backup your device with BlackBerry Link.
    Do a full backup!
    If something goes wrong you can easily go back to your current OS and restore your backup.

    Backup made?
    Then close BlackBerry Link and proceed:

    1)
    Install the latest version of Sachesi
    Currently 2.0.0 RC from here
    https://github.com/xsacha/Sachesi/releases

    2)
    Download the 3 leaked files for your device:
    Radio
    Core OS
    Debrick
    from the first post of this thread.
    Make sure that you download the proper files for your device, in this example it is a Z10-STL100-2

    The smallest file is the Radio and looks like:
    qc8960-10.3.1.1152-nto+armle-v7+signed.bar

    The biggest file is the Debrick and looks like:
    qc8960.factory_sfi.desktop-10.3.1.1151-nto+armle-v7+signed.bar

    The third file is the Core OS and looks like:
    qc8960.factory_sfi-10.3.1.1151-nto+armle-v7+signed.bar

    3)
    Create a folder on your hard drive
    Name it as the OS you have downloaded, e.g.
    10.3.1.1151

    4)
    Create a second folder on your hard drive
    Name it
    10.3.1.1151 Debrick

    5)
    Put the Core OS and the Radio in your 10.3.1.1151 folder

    6)
    Put the Debrick file (the biggest one) in your 10.3.1.1151 Debrick folder

    7)
    Open Sachesi
    You do not have to connect your device yet
    Just open Sachesi and click the tab Extract

    Click the Extract Signed button and select the big Debrick file from your 10.3.1.1151 Debrick folder

    You' ll see a progress bar running, wait till the process is finished.

    In your 10.3.1.1151 Debrick folder is now a second even bigger file which looks like:
    qcfm.image.com.qnx.qcfm.qc8960.factory_sfi.desktop .BB10_3_1.1151.798331.signed

    In Sachesi click on the Extract Apps button and selct this new big .signed file from your 10.3.1.1151 Debrick folder

    You' ll see again a progress bar running, wait till the process is finished.

    In your 10.3.1.1151 Debrick folder is now a subfolder which looks like:
    qcfm.image.com.qnx.qcfm.qc8960.factory_sfi.desktop .BB10_3_1.1151.798331

    Open this folder and copy all files in your formely created 10.3.1.1151 folder (where you put the Core OS and the Radio before)

    8)
    Now put your device in airplane mode and connect it via USB
    If you have set a password on your device enter it.
    Click the Install tab
    Leave the checkmark "Only install newer apps" checked
    Click the Install Folder button and select your 10.3.1.1151 folder
    You will see a progress circle, be patient this will take some time

    9)
    Your device restarts, first boot may take some time

    10)
    Congratulations, you are now running 10.3.1.1151

    11)
    Donate to xsacha for providing the excellent Sachesi software:
    Qtness Development Working on Qt apps
    Perfect ! And you can use the all apps on the op without having to extract that has already been done. So basically we need core, radio and all apps.

    Posted via CB10
    ridrez likes this.
    11-15-14 07:19 AM
  24. johnoyson's Avatar
    Does this fix the Z10 problem ? The problem where restarting your phone brings it back to factory settings and deleting all your stuff
    11-15-14 07:34 AM
  25. Sauravbhattarai's Avatar
    I have an awkward problem. I did a clean install with autoloader. Now whenever i open BB-link it asks me to complete setup first. What does complete setup mean? i signed in with my BB-ID already and Im connected to wifi. I restarted link and device both but still it asks me to complete setup. It is very annoying. Am I missing any steps? somebody advice please.
    11-15-14 07:35 AM
676 ... 1112131415 ...

Similar Threads

  1. Replies: 14
    Last Post: 02-20-15, 07:37 PM
  2. Smaller version of Blackberry Passport?
    By Christian Sianturi in forum BlackBerry Passport
    Replies: 14
    Last Post: 11-17-14, 03:59 AM
  3. how to make an autoloader?
    By ahmad habib in forum Ask a Question
    Replies: 6
    Last Post: 11-15-14, 08:30 PM
  4. Blackberry WIFI not working on my Blackberry Curve 8900?
    By CrackBerry Question in forum Ask a Question
    Replies: 0
    Last Post: 11-15-14, 08:14 PM
  5. Blackberry Assistant + Convenience Key = Win??
    By yohannrjm in forum BlackBerry 10 OS
    Replies: 2
    Last Post: 11-15-14, 08:07 PM
LINK TO POST COPIED TO CLIPBOARD