02-07-15 12:50 PM
849 ... 2223242526 ...
tools
  1. rav813's Avatar
    Anybody else received a OTA update. I get one of 33 kb? I'm on the Base network ( belgian carrier) . I install it but i don't now what the changes are. normally i lost my porche clock but she still exists.

    Posted via CB10

    probably just carrier settings
    11-01-14 10:39 AM
  2. Levi_Asaiah's Avatar
    [/QUOTE]

    Just delete the my Verizon app....

    Z30STA100-3/10.3.1.1016[/QUOTE]

    You're saying the only difference is the verizon app?

    Unlocked Z10STL100-3/10.3.1.938 /Digicel
    11-01-14 10:40 AM
  3. rav813's Avatar
    Anyone know if Verizon VVM working on Z30

    Posted via CB10
    has anybody answered this yet? I'm curious to find out
    11-01-14 10:42 AM
  4. tryfe's Avatar
    Anybody else received a OTA update. I get one of 33 kb? I'm on the Base network ( belgian carrier) . I install it but i don't now what the changes are. normally i lost my porche clock but she still exists.

    Posted via CB10
    It could be the exFAT bar being updated to the newest version. New version was available yesterday.

    Posted via CB10
    HotFix likes this.
    11-01-14 11:01 AM
  5. Chris Degroote's Avatar
    Ah okay

    Posted via CB10
    11-01-14 11:06 AM
  6. sparkybb's Avatar
    has anybody answered this yet? I'm curious to find out
    There was only one person in the thread that indicated Verizon VVM was working and then same person immediately followed up with the comment it was broke again, anyone else with it working or not?


    Posted via CB10
    11-01-14 11:26 AM
  7. Levi_Asaiah's Avatar
    Will the radio from this play well with 10.3.1.938 ?

    Unlocked Z10STL100-3/10.3.1.938 /Digicel
    11-01-14 11:42 AM
  8. xv2's Avatar
    Are you running the latest version of Link? Download it from BlackBerry which includes Blend.

    Posted via CB10
    Sadly yes, I have the one with the blend (also tried the one without blend). They both gave same error code.

    Thanks for the response!
    11-01-14 11:45 AM
  9. ridrez's Avatar
    Android notification in hub cannot open the app
    11-01-14 12:30 PM
  10. julio1925's Avatar
    Just installed the autoloader for STL1...works fine so far.

    Posted via CB10
    11-01-14 12:40 PM
  11. Cojaeck's Avatar
    Anybody else received a OTA update. I get one of 33 kb? I'm on the Base network ( belgian carrier) . I install it but i don't now what the changes are. normally i lost my porche clock but she still exists.

    probably just carrier settings
    I received this update also on my Passport. I also guess that it is just some carrier stuff.
    AND: This leak is so great....going to install it on my wifes Z30 now....
    11-01-14 01:12 PM
  12. Karan21's Avatar
    Any for z10 SLT100-1
    11-01-14 01:26 PM
  13. Bonsaibo's Avatar
    Loaded this up on Verizon Stl4 via Blitz, over 10.3.0.1418. Perfection. Everything works, no notification sound issues, beautiful battery life, and more. Fantastic.now on to my Q10.
    11-01-14 03:29 PM
  14. KemKev's Avatar
    Can somebody, please, help me? I am really going nuts...
    I have a white Q10 beauty. Every version after 10.3.1.634 forget the settings after I restart the device. As I want to make a system restore, this is crazy. It seems like it makes a wipe during every restart: the language is reset to english, background image is the system default, and so on.
    It tried the following steps:
    1. Install 634, then make a non-destructive upgrade to 1016 with sachesi from the files I found here. The system version remained 634.
    2. Install 1016 with autoloader. Version is 1016, works like a charm, but forget the settings
    3. Install 634, make a wipe, the install 1016 with autoloader. Result is the same: settings gone after restart.
    Not sure why the phone is losing the settings after a restart, but I once had issue #1 and after a couple of hours, it showed the correct OS. I am assuming that at minimum you have installed the correct OS core and radio files.
    11-01-14 05:10 PM
  15. KemKev's Avatar
    Any for z10 SLT100-1
    Dude, seriously? Take some time and browse through the thread; you just might find what you are looking for.
    11-01-14 05:12 PM
  16. Emboarg7's Avatar
    So I just download the autoloader for my z10 100-3 and run it, nothing else?
    11-01-14 05:16 PM
  17. KemKev's Avatar
    Android notification in hub cannot open the app
    Which app? Android notifications open the related apps quite fine on my phone.
    11-01-14 05:16 PM
  18. KemKev's Avatar
    So I just download the autoloader for my z10 100-3 and run it, nothing else?
    Start here -> http://forums.crackberry.com/bb10-le...loader-927076/
    Anilu7 likes this.
    11-01-14 05:18 PM
  19. jjscrackberry's Avatar
    Anyone having an issue when the phone restarts it wipes all data? I have seen a few posts on it but no fix yet. (Unless I missed it)
    This is what I did..

    1. Backup
    2. Wipe
    3. Autoloader
    4. Restarted
    5. Restore Backup
    6. Z10 Rebooted and all Data Lost

    Every time I pull the battery it wipes all data too.
    11-01-14 05:26 PM
  20. thurask's Avatar
    Anyone having an issue when the phone restarts it wipes all data? I have seen a few posts on it but no fix yet. (Unless I missed it)
    This is what I did..

    1. Backup
    2. Wipe
    3. Autoloader
    4. Restarted
    5. Restore Backup
    6. Z10 Rebooted and all Data Lost

    Every time I pull the battery it wipes all data too.
    Do that again, but skip step 5. Does it still wipe on reboot?
    11-01-14 05:28 PM
  21. Emboarg7's Avatar
    Thanks KemKev, that really helped!
    11-01-14 05:30 PM
  22. shashiraz's Avatar
    10.3.1.1016 autoloaders for all devices-img_20141102_030522.pngWhen I try to download I'm getting this. :@

    RoCking wid The Z10! STL 100-1! OS 10.3!
    11-01-14 05:36 PM
  23. jjscrackberry's Avatar
    Yes, wipes on a reboot even when I skip step 5.
    11-01-14 05:38 PM
  24. dviles's Avatar
    Do that again, but skip step 5. Does it still wipe on reboot?
    It's happening to a lot of us on any 10.3 except the Dev versions. We boot with a blue led and have never seen the setup wizard on first boot, no matter how many leaks we load. Phone has been this way since it was new. We're just waiti.g for a fix from BlackBerry.

    Have no problem accessing Link on the desktop, even though we have never run through the setup wizard. There are lots of posts throughout the forums from people with the same issue. As more try installing 10.3 leaks, more people complain about the problem.

    I was hoping what Thurask did with the Z3 hybrid 634/632 would maybe be a solution, but it's above my head, and nobody that knows BlackBerry has been involved with any of the threads. So, just waiting.

    Posted via CB10
    jjscrackberry likes this.
    11-01-14 05:44 PM
  25. yhamaie's Avatar
    When I try to download I'm getting this.
    Please note that files have been taken away from the production server.

    Posted via CB10
    11-01-14 06:11 PM
849 ... 2223242526 ...

Similar Threads

  1. 2000 % perfect solution for stl 1 10.3.1.1016/10.3.1.938 issue
    By tahabashir1991 in forum BB10 Leaked/Beta OS
    Replies: 38
    Last Post: 11-10-14, 06:03 AM
  2. 10.3.1.1016 screen shots thread
    By tahabashir1991 in forum BB10 Leaked/Beta OS
    Replies: 31
    Last Post: 11-02-14, 07:15 AM
  3. AT&T official 10.3.0.908 update
    By RLTurn77 in forum BlackBerry Passport
    Replies: 16
    Last Post: 10-31-14, 10:42 PM
  4. BlackBerry OS 10.3.1.1016 autoloaders now available for all BlackBerry 10 devices
    By CrackBerry News in forum CrackBerry.com News Discussion
    Replies: 0
    Last Post: 10-31-14, 02:00 AM
LINK TO POST COPIED TO CLIPBOARD