10-26-14 09:22 PM
585 ... 1011121314 ...
tools
  1. gtxtac's Avatar
    Anyone with Android app problems. Loaded 10.3.0.1154 on My verizon z30. I have no android apps working. 2 reboots. Any others with this problem- used autoloader

    STA-100-3 v 10.3.0.1154; Radio 1150
    I have not only with current release of instagram as before
    09-05-14 01:50 PM
  2. vinniesworld's Avatar
    mm I'm guessing Verizon have a strategic alliance with BlackBerry now then looking at the current Passport release up and coming and the OS files specifically for Verizon.

    I am guessing this puts cash in both pockets and is good for BlackBerry
    09-05-14 01:55 PM
  3. ff1520's Avatar
    Perhaps some guidance may be sent my way. Trying to install via Sachesi on my STL100-4, have core OS, radio, and APP bar files that were extracted from DEBRICK in a folder and start the install process. Seems to start normally (as it has in the past) but then get an error after it runs for a while. Error is: While sending: sys.data.nuance_ve.ENU.ava.bar
    Error: failure 880 assets/data/fs1.rcfs: SHA512 digest mismatch

    Anybody have any idea why I might be experiencing this?

    Thanks in advance.

    Rick
    NathanQ10 likes this.
    09-05-14 02:10 PM
  4. anon1727506's Avatar
    mm I'm guessing Verizon have a strategic alliance with BlackBerry now then looking at the current Passport release up and coming and the OS files specifically for Verizon.

    I am guessing this puts cash in both pockets and is good for BlackBerry
    Your doing a lot of guessing about Verizon and BlackBerry......
    09-05-14 02:12 PM
  5. Ruslan Botsyurko's Avatar
    I'm not experiencing any lag. Is it possible you have some file corruption or that your device is still syncing?

    I performed a non destructive so I'm good to go this time. But I usually find if I run an autoloader my device will lag for a good 3 days while my main inbox syncs.. granted I have 26,000 messages in my inbox and about 2k contacts.

    Posted via CB10
    OK, I'll let it sit for a while. It's weird that yesterday after I loaded it non-destructively it was working pretty fine, but today as soon as I need to show it off, it suddenly started acting like a cheap Android phone...
    09-05-14 02:12 PM
  6. Fret Madden's Avatar
    Don't need to load the debrick if you've loaded the core already. Just get the apps out of the debrick (Sachesi/Darcy's Tools) and load them.
    /facepalm

    Reminds me of the time I couldn't figure out why pressing the power button wasn't turning on my PC, PSU switch was off. Occam's Razor ftw.

    Posted via CB10
    09-05-14 02:35 PM
  7. Arabianhorse's Avatar
    Anyone with Android app problems. Loaded 10.3.0.1154 on My verizon z30. I have no android apps working. 2 reboots. Any others with this problem- used autoloader

    STA-100-3 v 10.3.0.1154; Radio 1150
    I did a restore. Do you think that bricked the Android apps and ports?

    STA-100-3 v 10.3.0.1154; Radio 1150
    09-05-14 02:52 PM
  8. KenV54's Avatar
    I did a restore. Do you think that bricked the Android apps and ports?

    STA-100-3 v 10.3.0.1154; Radio 1150
    If you restored the BlackBerry Runtime along with everything else, then yes. If so, you'll have to autoload, maybe wipe first, then do a selective restore with Windows Link, expanding the apps restore, and unchecking BlackBerry Runtime.

    Posted via CB10
    09-05-14 03:21 PM
  9. dustmalik's Avatar
    If you restored the BlackBerry Runtime along with everything else, then yes. If so, you'll have to autoload, maybe wipe first, then do a selective restore with Windows Link, expanding the apps restore, and unchecking BlackBerry Runtime.

    Posted via CB10
    Before you do this ^^^, first of all, extract the android runtime files from 10.3.0.1154 and sideload them, then reboot. If that doesn't resolve the android apps issue, then go ahead and follow the above suggestion.

    Posted via CB10 using my Gorgeous Z30
    09-05-14 03:33 PM
  10. Hypnoboy's Avatar
    I've done my update. Should my phone be showing this as Software Release .675?
    09-05-14 03:37 PM
  11. Hphv's Avatar
    One anouging thing. In contact app when you go to specific contact and you swipe up to see more details below it does not stay there it goes up automatically again. Anyone has the same? How to fix that?

    I did notice if enough details in the contact it stays down but if not then in swipes up like the phone thinks you have a bigger screen and you can see them all like that
    09-05-14 03:38 PM
  12. KenV54's Avatar
    Before you do this ^^^, first of all, extract the android runtime files from 10.3.0.1154 and sideload them, then reboot. If that doesn't resolve the android apps issue, then go ahead and follow the above suggestion.

    Posted via CB10 using my Gorgeous Z30
    I agree. Nothing to lose.

    Posted via CB10
    09-05-14 03:42 PM
  13. peednus's Avatar
    Howdy,

    I wanna update from 10.2.2.932 on my Q10 using Sachesi. Core + radio + apps (from the debrick file). Anyone had any specific problems coming from 10.2.2.x? Any pointers/help would be appreciated. Not my 1st rodeo but it's my 1st leap to 10.3.

    Thanks

    Posted via Commodore 64
    09-05-14 03:59 PM
  14. shorski's Avatar
    I've done my update. Should my phone be showing this as Software Release .675?
    No. It should read 738

    Posted via My Cute BlackBerry z30 on OS10.3.0.1154
    09-05-14 04:00 PM
  15. bluegreen1965's Avatar
    I've done my update. Should my phone be showing this as Software Release .675?
    Mine did this also yesterday. I had to reload the core os. The radio and apps were fine.
    09-05-14 04:34 PM
  16. bluegreen1965's Avatar
    Perhaps some guidance may be sent my way. Trying to install via Sachesi on my STL100-4, have core OS, radio, and APP bar files that were extracted from DEBRICK in a folder and start the install process. Seems to start normally (as it has in the past) but then get an error after it runs for a while. Error is: While sending: sys.data.nuance_ve.ENU.ava.bar
    Error: failure 880 assets/data/fs1.rcfs: SHA512 digest mismatch

    Anybody have any idea why I might be experiencing this?

    Thanks in advance.

    Rick
    Are you loading them all together or doing each separately (core then radio then apps)? I did them separately and no error messages. Just a thought. Btw, love your Scrabble tile!
    09-05-14 04:37 PM
  17. Bolderholder's Avatar
    Hoping there's good feedback to 10.3 as the rest of us non brave souls wait until the official OS is released. Kudos to everyone with the chimmy-chungas to do all of this loading stuff. Blackberry should pay all of you with free App World credits for the QA they're about to get..
    09-05-14 04:47 PM
  18. seletok's Avatar
    Howdy,

    I wanna update from 10.2.2.932 on my Q10 using Sachesi. Core + radio + apps (from the debrick file). Anyone had any specific problems coming from 10.2.2.x? Any pointers/help would be appreciated. Not my 1st rodeo but it's my 1st leap to 10.3.

    Thanks

    Posted via Commodore 64
    I was made the same update on Z10. No problem.

    Posted via CB10
    09-05-14 04:51 PM
  19. BAD FIRE's Avatar
    Can someone tell me how to upgrade to 10.3.0.1154? I need instructions as to how to instal it please
    09-05-14 05:01 PM
  20. jzajac's Avatar
    Oh, Ohhhhhhhh.....for the first time after many, many leaks and official OS installs, I have run into a snag. I am showing 10.3.0.1154 as my OS in BBVE but cannot load my backup from Link at all!! I plug into my laptop and its like my USB port isn't even there...no Link activation OR library access on my laptop side. I have done a SW to no avail, I have downloaded the debrick file as I always have and looks like I may have to use it this time. Any other thoughts out there???? Lemme know and in the meantime, I'm going to uninstall Link and do a fresh install to see if that works, wish me luck!!
    Sometimes you have to reinstall the BlackBerry Device drivers so your computer will recognize the phone as a drive (in my case the Y: and Z: drives). After I went from 10.2 to 10.3.0.1052 I had the same thing happen to me. Reinstall those device drivers and then disconnect and restart your device, then reconnect. All should work beautifully after that and you'll be able to connect back to Link to restore.
    09-05-14 05:12 PM
  21. bb_tv's Avatar
    One anouging thing. In contact app when you go to specific contact and you swipe up to see more details below it does not stay there it goes up automatically again. Anyone has the same? How to fix that?

    I did notice if enough details in the contact it stays down but if not then in swipes up like the phone thinks you have a bigger screen and you can see them all like that
    Hi I have exactly the same problem. It's very annoying. Hope they fix it soon.
    09-05-14 05:26 PM
  22. Pdinos3's Avatar
    Can someone tell me how to upgrade to 10.3.0.1154? I need instructions as to how to instal it please
    http://forums.crackberry.com/showthread.php?t=904841

    All you had to do is exit this thread. Go to top of leaks section. Click on stickies (in CB10 app) and there are a bunch of tutorials. Or read some of the thread. It's been repeated several times. Please

    Z30STA100-5/10.3.0.1154
    warreng and ev44 like this.
    09-05-14 05:57 PM
  23. Norg's Avatar
    OK, I'll let it sit for a while. It's weird that yesterday after I loaded it non-destructively it was working pretty fine, but today as soon as I need to show it off, it suddenly started acting like a cheap Android phone...
    I think your BB is shy !!

    Posted on CB10 via my Snappy Q5
    Ruslan Botsyurko likes this.
    09-05-14 06:17 PM
  24. Norg's Avatar
    Hi I have exactly the same problem. It's very annoying. Hope they fix it soon.
    Just a thought, could it be happening since this OS release is being targeted for the PassPort which has a square display, much like my Q5's square display, since I can't replicate that situation?! What model device are you guys running it on?

    Posted on CB10 via my Snappy Q5
    09-05-14 06:25 PM
  25. BAD FIRE's Avatar
    While sending: qc8960.verizon_sfi.desktop-10.3.0.1154-nto+armle-v7+signed.bar
    Error: failure 502 SCM b'QNXH-OS-1' signature check failed (invalid signature) This is the message I get when I try to instal using sachesi. It gets to 74% then stops and say this!
    09-05-14 06:26 PM
585 ... 1011121314 ...

Similar Threads

  1. Clipboard Manager - Free for BlackBerry 10
    By BBDaMo in forum App Announcements
    Replies: 4
    Last Post: 09-06-14, 07:19 AM
  2. Access Blackberry 10 device on Windows computer
    By ahpitre in forum Ask a Question
    Replies: 4
    Last Post: 09-05-14, 05:45 PM
  3. When will the official Software Update for 10.3 be available
    By steven goldenboy in forum BlackBerry Z10
    Replies: 11
    Last Post: 09-05-14, 12:36 AM
  4. 10.3 Brower issues
    By aportaro13 in forum BB10 Leaked/Beta OS
    Replies: 2
    Last Post: 09-04-14, 02:09 PM
  5. 10.3.0.1052 Brightness??
    By Kemir in forum BB10 Leaked/Beta OS
    Replies: 5
    Last Post: 09-04-14, 01:55 PM
LINK TO POST COPIED TO CLIPBOARD