07-04-13 01:39 PM
1,251 ... 34567 ...
tools
  1. iririr's Avatar
    And your positive you switch to Z10 STL100-2 when grabbing the debrick files?

    Posted via CB10
    Yes...I didn't choose debrick thou...I chose Upgrade mode...was that my mistake?
    05-29-13 07:31 PM
  2. tickerguy's Avatar
    Yes.

    You should get two -- and only two -- files that are then combined using CAP (after the .signed files are extracted from what you get, which are BARs)
    iririr likes this.
    05-29-13 07:33 PM
  3. iririr's Avatar
    Yes.

    You should get two -- and only two -- files that are then combined using CAP (after the .signed files are extracted from what you get, which are BARs)
    damn....i guess i should just use autoloaders from now on....anyways...i am back on 2342....so it's all good
    05-29-13 07:35 PM
  4. tickerguy's Avatar
    I assure you it works...

    10.1.0.2354 Autoloader for STL100-2//3/4-img_00000160.png

    Posted via CB10
    scrapmetal58 likes this.
    05-29-13 07:35 PM
  5. SCrid2000's Avatar
    Updated the OP with a working Autoloader.
    05-29-13 07:36 PM
  6. Foppa_21's Avatar
    Up and running on my Verizon STL-4. I had no real issues with 2342, but if BB said it failed, I'm on to the next one.
    05-29-13 07:38 PM
  7. diegonei's Avatar
    Just got an error loading eu_ES.10.1.4.something

    Let me try downloading this again...

    EDIT: It seems sachup blew up the 1st download. It's installing now (38%)...
    Last edited by diegonei; 05-29-13 at 08:14 PM.
    05-29-13 07:39 PM
  8. danfrancisco's Avatar
    Hot damn! Yet another Z10 leak! And it's not even Friday yet!!! Ladies and gentlemen, we are officially in leak heaven! Thanks, guys!!!
    brout likes this.
    05-29-13 07:47 PM
  9. Anilu7's Avatar
    OK it doesn't work on my STL 100-3...after loading it on my phone, i get "Incompatible radio image loaded on device" error.....****...i am screwed....
    Are you using the 100-1 on the 100-3?
    05-29-13 07:49 PM
  10. Foppa_21's Avatar
    After getting the new OS loaded, do you reboot right away or give it a few hours for everything to sync and then reboot? Or security wipe, reboot then sync? Never reboot unless you have to? Any best practices here?
    05-29-13 07:53 PM
  11. iririr's Avatar
    Are you using the 100-1 on the 100-3?
    No 100-2.

    I followed the instruction on first post....so not sure what went wrong....
    I am downloading the autoloader instead...
    05-29-13 07:56 PM
  12. Temple Sascha's Avatar
    Yes.

    You should get two -- and only two -- files that are then combined using CAP (after the .signed files are extracted from what you get, which are BARs)
    I am confused. Why does OP say use update mode?
    05-29-13 07:59 PM
  13. f0xG3's Avatar
    Can anyone post the Software Release of this version. I will try looking at Sachup later and do an upgrade (so that I don't lose my files and settings)


    Posted via CB10
    jlbdca likes this.
    05-29-13 08:01 PM
  14. diegonei's Avatar
    After getting the new OS loaded, do you reboot right away or give it a few hours for everything to sync and then reboot? Or security wipe, reboot then sync? Never reboot unless you have to? Any best practices here?
    There are none, the OS is too new as it is. But I got two updates from my carrier before getting stuck with 10.0.1.90 and I didn't need to reboot after the update at all.

    If you're using the sachup method and downloading the Update files, it should be the same scenario as updating OTA via your carrier.
    05-29-13 08:01 PM
  15. GvdM's Avatar
    Wigley458's autoloader seemed to work well for me. Restored from backup fine. See how this works on a STL100-4
    05-29-13 08:04 PM
  16. Wigley458's Avatar
    Can anyone post the Software Release of this version. I will try looking at Sachup later and do an upgrade (so that I don't lose my files and settings)


    Posted via CB10
    Read thread. Its been mentioned many many times. Anyway. 2312

    Posted with my awesome z10 on cb10, my Channel pin C000B3B57
    05-29-13 08:06 PM
  17. theninjew's Avatar
    In order not to lose all data from your device, do we do an Update or a Debrick? Confusing posts say either one and the OP says Update.

    Posted via CB10
    05-29-13 08:06 PM
  18. jimpilot's Avatar
    So I did the upgrade with sachup and used the upgrade setting; seems to have worked well, all my apps and settings were there except the browser. Not sure why but I went back to the folder where all the files were and dragged the file named browser over and it installed. Now I have the browser and all is well. -4 version on Verizon

    Much easier than the auto loader and it only took about 20 min total.
    Last edited by jimpilot; 05-29-13 at 08:21 PM.
    05-29-13 08:09 PM
  19. Krash_Kart's Avatar
    On vzw 100-4 tether and hot spot are unlocked now..

    Posted via CB10
    05-29-13 08:11 PM
  20. ShinyDimples's Avatar
    Before I try to update, is this version working on -4? Either with the autoloader or such up? Anyone having any luck?

    Posted via CB10
    05-29-13 08:13 PM
  21. Bilaal's Avatar
    After getting the new OS loaded, do you reboot right away or give it a few hours for everything to sync and then reboot? Or security wipe, reboot then sync? Never reboot unless you have to? Any best practices here?
    For the last two leaks, I've been using security wipe just for that extra measure. It probably doesn't do much to the overall experience but it gives me a piece of mind and I like a clean piece of hardware :-)

    Posted via CB10
    05-29-13 08:14 PM
  22. Krash_Kart's Avatar
    Before I try to update, is this version working on -4? Either with the autoloader or such up? Anyone having any luck?

    Posted via CB10
    yes I used suchup to load everything.


    Posted via CB10
    05-29-13 08:16 PM
  23. ShinyDimples's Avatar
    Thanks krash-kart. I'll give it a try also.

    Posted via CB10
    05-29-13 08:18 PM
  24. f0xG3's Avatar
    Can someone post the upgrade mode links to this update generated at Sachup?

    EDIT : Perhaps on a text file

    Posted via CB10
    schumang likes this.
    05-29-13 08:18 PM
  25. ARWestenberger's Avatar
    The gdrive link worked great for me, set up was a bit slow, but otherwise its working well so far on STL100-4
    05-29-13 08:21 PM
1,251 ... 34567 ...

Similar Threads

  1. Replies: 1037
    Last Post: 11-16-13, 11:48 AM
  2. where can i find the official 10.1 for stl100-1
    By Ernie Keyser in forum BlackBerry Z10
    Replies: 9
    Last Post: 05-15-13, 04:52 PM
  3. Leaked 10.1.0.1627 for STL100-1 (link provided)
    By yueytan in forum BB10 Leaked/Beta OS
    Replies: 11
    Last Post: 05-10-13, 12:47 AM
  4. Leaked 10.1 os for STL100-1
    By Michael Parasdas in forum BB10 Leaked/Beta OS
    Replies: 6
    Last Post: 05-08-13, 03:59 AM
  5. Replies: 9
    Last Post: 04-22-13, 09:30 PM
LINK TO POST COPIED TO CLIPBOARD