07-04-13 01:39 PM
1,251 ... 910111213 ...
tools
  1. tickerguy's Avatar
    Did it the schi way, my text messages wont load though(text messages are there but wont open!). im on stl-4 HELPPP!!!
    Run the autoloader and deal with the data wipe (and restore)
    eugene1979 likes this.
    05-30-13 12:20 AM
  2. dasaenzt's Avatar
    Hi, I connected my Z10 to BBlink and now I'm receiving a 10.1.0.273 software update. Do you have any news about this?
    05-30-13 12:23 AM
  3. arthropod88's Avatar
    The sachup way keeps your data... no restore needed! awesome!

    Posted via CB10
    05-30-13 12:26 AM
  4. arthropod88's Avatar
    I haven't tried connecting to Link after the update... I will try in the morning...

    Posted via CB10
    05-30-13 12:32 AM
  5. Jakob Greve's Avatar
    Hmm still got the contact issue, so it's back at 1720 for me, which works like a charm oldie but goodie
    05-30-13 12:52 AM
  6. Kris Simundson's Avatar
    Built my own autoloader, uploading tonight will have link posted in the morning


    Posted via CB10
    fabek likes this.
    05-30-13 12:55 AM
  7. Xavior's Avatar
    Built my own autoloader, uploading tonight will have link posted in the morning


    Posted via CB10
    Kris, are you having problems with mms as well? I was wondering if it has something to do with the labeling of the network. Someone mentioned a battery pull but I haven't tried it.

    Posted via CB10
    05-30-13 12:58 AM
  8. Xavior's Avatar
    Should there be specific information in the apn settings for rogers? Mine says ltrmobile.apn

    Posted via CB10
    05-30-13 01:01 AM
  9. turbodmac's Avatar
    10.1.0.2354 Autoloader for STL100-2//3/4-img_00001236.png
    10.1.0.2354 Autoloader for STL100-2//3/4-img_00001237.png
    10.1.0.2354 Autoloader for STL100-2//3/4-img_00001238.png
    Apn is open for me now. This leak is very fast, especially in the file manager. Nice work!

    Posted via CB10
    gkl likes this.
    05-30-13 01:03 AM
  10. turbodmac's Avatar
    Pictures are all in one place, don't have to navigate to media card.

    Posted via CB10
    05-30-13 01:07 AM
  11. FuriousK's Avatar
    Dang, I was fine with MMS on Rogers on 2342 as well.
    I actually did a security wipe before running the autoloader this time, then again after.
    Just tried and I get "General Problems" trying to send an MMS with Picture Attachment now too, but regular texts go through.
    Just wanted to update. MMS is now working for me, though I'm honestly not sure what out of everything I tried actually fixed it.
    I shut down, removed my microSD, and pulled the battery.
    Then I re-ran the autoloader, and did another security wipe after that.
    After getting through the initial setup, I held the power button down throughout the reboot until I saw the BB logo. Someone mentioned this as a device reset in another thread, though I didn't really notice anything different happening.
    (At some point there, I may have powered down and pulled the battery a second time.)
    Anyway, after that reboot, I tried sending some MMS with pics to myself and it worked.

    OR NOT.

    Shut down to put my microSD card in, restarted and decided to test MMS again.
    "General Problems"
    Last edited by FuriousK; 05-30-13 at 01:22 AM. Reason: Problem Not Fixed
    05-30-13 01:14 AM
  12. zocster's Avatar
    Thanks for the OS



    Sent from my Z10 using Tapatalk 2
    05-30-13 01:20 AM
  13. DetlevCM's Avatar
    Hmm, I don't have a software release number having used Sachibar - normal? Is it a problem?

    Posted via CB10
    05-30-13 01:36 AM
  14. whitezee10's Avatar
    Soo, the one posted in the 1st page is the correct and working autoloader now?

    Posted via CB10
    05-30-13 01:49 AM
  15. teostar's Avatar
    hey guys i noticed in the os folder there r .bar files for bridgebbm, bridgecalendar, bridgecontacts etc. is that normally in the os folders, or this is a hint the old bridge functions coming back?
    05-30-13 01:49 AM
  16. szlevi's Avatar
    Just did via sachi using Upgrade... installing 134 bars takes a lot of time and the phone restarted around the video_editor... botted up, had to re-enable dev mode, restart saschibar and drag and drop the remaining dozen or so and it did finish fine. Restart might be a bit faster but not blazing (yes, I pulled the battery after shutdown etc.) Payment options are gone and does not seem to pick up TMO in the spot it used to but we'll see more tomorrow especially about battery life... thanks again!
    05-30-13 01:50 AM
  17. lobomd's Avatar
    Just wanted to update. MMS is now working for me, though I'm honestly not sure what out of everything I tried actually fixed it.
    I shut down, removed my microSD, and pulled the battery.
    Then I re-ran the autoloader, and did another security wipe after that.
    After getting through the initial setup, I held the power button down throughout the reboot until I saw the BB logo. Someone mentioned this as a device reset in another thread, though I didn't really notice anything different happening.
    (At some point there, I may have powered down and pulled the battery a second time.)
    Anyway, after that reboot, I tried sending some MMS with pics to myself and it worked.

    OR NOT.

    Shut down to put my microSD card in, restarted and decided to test MMS again.
    "General Problems"
    try pulling out your sim card then putting it back in. worked for me


    well i can send texts to myself on verizon but not my wife on sprint, she can text me though. so go figure.
    Last edited by lobomd; 05-30-13 at 02:01 AM. Reason: Update
    05-30-13 01:51 AM
  18. Kris Simundson's Avatar
    Just did via sachi using Upgrade... installing 134 bars takes a lot of time and the phone restarted around the video_editor... botted up, had to re-enable dev mode, restart saschibar and drag and drop the remaining dozen or so and it did finish fine. Restart might be a bit faster but not blazing (yes, I pulled the battery after shutdown etc.) Payment options are gone and does not seem to pick up TMO in the spot it used to but we'll see more tomorrow especially about battery life... thanks again!
    Should have just used the debrick files as has been mentioned serval times now or better yet a autoloader

    Posted via CB10
    05-30-13 01:55 AM
  19. zocster's Avatar
    Used sachup to download debrick, used 7z to extract, used sachup to combine. Loaded, security wipe, started from scratch.

    Rebooted few times, all info still there except reboot time.

    Hmm, I don't have a software release number having used Sachibar - normal? Is it a problem?

    Posted via CB10
    Sent from my Z10 using Tapatalk 2
    05-30-13 01:57 AM
  20. lobomd's Avatar
    try pulling out your sim card then putting it back in. worked for me


    well i can send texts to myself on Verizon but not my wife on sprint, she can text me though. so go figure.
    so update
    i found an old thread that suggested changing the number from xxxxxxxxxx to (xxx)-xxx-xxxx format now i can text her ... weird
    05-30-13 02:14 AM
  21. TomXcution's Avatar
    After I dialing the number and before i make a phone call , it still get a short stuck.
    05-30-13 02:16 AM
  22. DetlevCM's Avatar
    Used sachup to download debrick, used 7z to extract, used sachup to combine. Loaded, security wipe, started from scratch.

    Rebooted few times, all info still there except reboot time.



    Sent from my Z10 using Tapatalk 2
    Hmm, I just downloaded the debrick file which gave me two bar files that I installed directly via Sachibar...
    Strange why do we get different processes or files?

    Posted via CB10


    Edit: the one thing i did not do is wipe
    I prefer not having to reload it very time - just a pain in the neck....
    05-30-13 02:20 AM
  23. zocster's Avatar
    I think tinker mentioned about sachibar 'may' be missing stuff while loading.

    Hmm, I just downloaded the debrick file which gave me two bar files that I installed directly via Sachibar...
    Strange why do we get different processes or files?

    Posted via CB10


    Edit: the one thing i did not do is wipe
    I prefer not having to reload it very time - just a pain in the neck....
    Sent from my Z10 using Tapatalk 2
    05-30-13 02:24 AM
  24. DetlevCM's Avatar
    I think tinker mentioned about sachibar 'may' be missing stuff while loading.



    Sent from my Z10 using Tapatalk 2
    Hmm....
    I noticed it does the Radio separately - maybe I should try the autoloader as well then?
    It would be a busy evening then...

    Is there a way to check easily?

    Posted via CB10
    05-30-13 02:29 AM
  25. szlevi's Avatar
    Should have just used the debrick files as has been mentioned serval times now or better yet a autoloader

    Posted via CB10
    Why? Wouldn't I lose all my settings etc then?
    My intention was to keep all my settings...

    ...BTW Android runtimes run A LOT FASTER NOW, with little to no lag, the first time I'm actually impressed, now I can see this thing becoming a viable alternative for me...

    ...as soon as we get BB10.2 w/ Android v4.2.2 suport, of course.

    Posted via CB10
    Mecca EL likes this.
    05-30-13 02:38 AM
1,251 ... 910111213 ...

Similar Threads

  1. Replies: 1037
    Last Post: 11-16-13, 11:48 AM
  2. where can i find the official 10.1 for stl100-1
    By Ernie Keyser in forum BlackBerry Z10
    Replies: 9
    Last Post: 05-15-13, 04:52 PM
  3. Leaked 10.1.0.1627 for STL100-1 (link provided)
    By yueytan in forum BB10 Leaked/Beta OS
    Replies: 11
    Last Post: 05-10-13, 12:47 AM
  4. Leaked 10.1 os for STL100-1
    By Michael Parasdas in forum BB10 Leaked/Beta OS
    Replies: 6
    Last Post: 05-08-13, 03:59 AM
  5. Replies: 9
    Last Post: 04-22-13, 09:30 PM
LINK TO POST COPIED TO CLIPBOARD