trying to connect playbook hdmi to tv. I have proper cable but setting shows no connection on the playbookTV also shows no signal
Printable View
trying to connect playbook hdmi to tv. I have proper cable but setting shows no connection on the playbookTV also shows no signal
I previously posted some suggestions on the PlaybookForum area so you could give the following a try:
I had a hdmi to micro cable that worked and then quit on me. I was getting the No Signal and check your Source message. It seemed a bit loose on the micro to Playbook connection side but I found that very gingerly and very, very slowly pushing in the micro connector to the Playbook would sometimes get it work though it would often take a number of such tries. So, not always wanting to have to always do that, I went over to a 'Buck or Two' store and got another brand of 6 foot cable for aboot $8 Canadian.
No problems on the connection end so far which as others have also suggested, it might most often be the cable at fault instead of the Playbook.
One more note: On your HDMI Settings make sure Default to Mirror Mode is set On and that your tv settings are correct.