[CK_rbg]

It won't stop. Every few minutes it will blink 10 times, sometimes 3 or 4. It just finished steadily blinking for at least 5 good minutes. No notifications have come thru. My Z10 is possessed by a magenta demon. Have restarted, turned off LED, etc. My efforts are futile.

Posted via CB10

[zocster]

Hi, are you able to tell us what app do you use for notifications LED?

[ealvnv]

If you're using neutron music player that's what is causing the magenta led

Posted via CB10

[CK_rbg]

I use power tools. I had a custom led using magenta & it's since been deleted. Now it's both vibrating & blinking about every 5 minutes.

I do have Neutron but haven't ran it in days. This is happening with no apps running & no notifications coming thru. My next step is to delete power tools & reinstall.

Posted via CB10

[fabio984]

I always used bebuzz and never had any problem. Try it.


Sent from my iPhone using Tapatalk

[mushroom_daddy]

I always used bebuzz and never had any problem. Try it.

Perhaps you could help me get BeBuzz working on my Q10. I have tried to use both BeBuzz and PowerTools to control LED colours with little success.
My objectives are fairly simple, and are as follows. I have three contacts who I'd like to discriminate between, when receiving SMS and Emails. This is something I had working well with the BellShare app on my Bold9900

Example settings using BeBuzz 10 Pro:
contact #1, SMS LED set to green, Emails set to green/white
contact #2, SMS LED set to magenta, Emails set to magenta/white
contact #3, SMS LED set to cyan, Emails set to cyan/white
Any other contacts in my address book, SMS messages LED set to flash blue. No LED for any other Emails.
I'd like to have all other SMS messages to flash the LED in default red.

To see whether BB10 settings are interfering with above I have tried the above with the system LED notifications set to OFF (and also ON); I understand that this is a prerequisite for PowerTools, but I've tried the same with BeBuzz.

I've had little or no success with these objectives using BeBuzz (or PowerTools). I either get no LED, or all red, or more rarely all blue.
Advice from somebody who has this working would be very welcome

Posted via CB10

[polytan02]

Do a hard hard reset ? Press power+volume_up+volume_down until the blue loading circle appears.

Posted via CB10