[X4xtraordinary]

I'm considering to change full housing from white to red. Can someone advise me the screwdriver models? Thanks in advance.

Posted via CB10

[wojt7]

You need T2 and T4 screwdrivers. You will need to be very careful when separating the LCD from the rest of the body if you want to do the complete changeover.

[X4xtraordinary]

You need T2 and T4 screwdrivers. You will need to be very careful when separating the LCD from the rest of the body if you want to do the complete changeover.

Thanks. I got the full housing with lcd. Hope that's not too difficult.

Posted via CB10

[eddy_berry]

Very simple then. I have seen different middle housings so make sure the new bits match the old ones. You can just use the original if the gold connectors on the motherboard side don't match. The middle housing is the bit you see when you open the back to change the battery and houses the loud speaker. The main housing should be the same for all models. Have fun and good luck.

Posted via CB10

[BergerKing]

Blackberry Z10 Complete Disassembly with LCD scre…:

[stabstabdie]

Torx torx torx

[RoseBud68]

Does not look to difficult to do. Where is there a good place to buy the different color housing.