[harryhayde]

?

Posted via CB10

[harryhayde]

*how do I

Posted via CB10

[balenax]

You have 2 options:
1. if you want to revert to the official carrier os you just use blackberry link - reload device software option;
2. if you want a specific os version you just install it over your current leaked os

[Kris Simundson]

Why did you install a leak without knowing how to get back to stock? That was just silly

Posted via CB10

[harryhayde]

I know how to revert back to the normal os but my link doesn't have a reload device software

Posted via CB10

[balenax]

I know how to revert back to the normal os but my link doesn't have a reload device software

Posted via CB10

Update it to the latest version then, might be a bit out of date.

Posted via CB10

[Gearheadaddy]

Plug phone in to PC. Start Link... ReloadSoftware will show up then.

[harryhayde]

I'm running 1.1.1.32 something

Posted via CB10

[RADEoN1337]

Those nonexistent versions can be tricky to uninstall.

Yeah I'm a straight guy. Get over it.

[HotGroove]

I'm in the same boat, and need help... Badly.

[Gearheadaddy]

Google "How to use BlackBerry Link to reload software"....

Posted via CB10

[Tmaster100]

I am a little over the leak scene. I loaded 4543 and noticed the signal is not stable on 900Mhz as it was with the Optus carrier version 1720. It seems to keep changing towers or flicking between 2100Mhz and 900Mhz, it's all over the place.

That said i followed instructions and tried the BB Link procedure, no good, it keeps saying "No new updated software availible". Next i purposly bricked my Z10 (ST100-2) by disconnecting during a write procedure, this worked, my phone was doing the "brick flash" and i tried again with BB Link, same thing.

I am trying to find out why BB Link won't pull down 1720 from Optus, even when the phone is bricked!

[316austin]

I have tried the BB Link method, the start auto loader and soft brick method even the internet method, everything I have searched for and found on these forums and never has successfully reverted back to stock it always errors out and says there was and error updating your software. STL100-4 running 10.1.0.4543. I sure am not a expert but I am doing what each instructions say for each method and no go. Don't know what else to do. Help please anyone.

[Kris Simundson]

I have tried the BB Link method, the start auto loader and soft brick method even the internet method, everything I have searched for and found on these forums and never has successfully reverted back to stock it always errors out and says there was and error updating your software. STL100-4 running 10.1.0.4543. I sure am not a expert but I am doing what each instructions say for each method and no go. Don't know what else to do. Help please anyone.

Run a auto loader that's a lower than your stock, more than likely anything below 1720 and than OTA to stock

Posted via CB10

[316austin]

Thanks Kris, I guess I just search the forums for that and give it a try. Thanks again your always a big help on here from what I see and thanks for what you do.

[316austin]

are there any auto loaders for Verizon official os 10.0.1720 or anything below the current 10.0.9 or even the current os for verizon z10 STL-4 I did search and can not find anything except 1 from someone who says he is Chinese and it does not work. Please I have to get this thing back to stock

[Kris Simundson]

are there any auto loaders for Verizon official os 10.0.1720 or anything below the current 10.0.9 or even the current os for verizon z10 STL-4 I did search and can not find anything except 1 from someone who says he is Chinese and it does not work. Please I have to get this thing back to stock

Check out the program sachesi, find verizon mcc and mnc, download the debrick files for the stock verizon OS, and than yse sachesi to make a autoloader of those two files.

Posted via CB10

[auditman]

Download and run one of the autoloader leaks. Worked for me last nite. Downgraded from 10.2 to 10.1.0.4633.

Posted via CB10

[xABR1996x]

Download and install blackberry link press on setting icon then Reload software and this will take you to latest official software

[316austin]

Thanks a lot I will try my best to do that but it sounds way over my head but I will sure try. Thanks again

[auditman]

Nah just give it a try. I didnt even use the bb link until i needed to restore. Thats the one that took awhile.

[316austin]

I cant even begin to figure this Sachesi thing out I guess I'm just a dummy but I have tried Link, the soft brick method and the way using the internet and this thing just will not go back to stock. It always errors out and says could not restore or update software. I guess I am just stuck with no way out. Thanks to everyone for your help.

[Tmaster100]

I tried the Sachesi software, chose debrick version, it found what i was looking for and i subsequently loaded it successfully however my screen become completely unresponsive, battery pull's did nothing and i have not been able to find a full autoloader leak 10.0.1720 (or earlier) that works on my STL100-2. It's frustrating!!