[thelazyone]

Does anyone happen to know what the password is. It's 6 digits. I accidentally typed in the wrong phone number when speaking with a sprint rep regarding my issue with my ported number. Now the wrong number is shown every time. I could call Sprint back but didn't want to be on hold forever.

[wikes82]

Call sprint reps is the fastest to get it...
there are ways to get it from curve if you wanna do it, but it's kinda tricky
here's what to do:

1. Install Desktop Manager, and go to Device Manager, and look for Serial (COM port map for your blackberry)
2. Find a software called UniCDMA (Google it)
3. Connect you berry, and launch DM
4. Run UniCDMA, and set the serial port to your blackberry port (if there are 2 ports, use the highest number (e.g: if you have COM3 and COM4, use COM4)
5. Click on Memory Tab, then Enter Starting Address : 0x1067ed90, and Length : 1703936
Dump the memory to a file.
6. Open the file, and look for 6 continuous Digits, in that binary file. That is your SPC/MSL code

[thelazyone]

Thank you.

[carlosct]

Hi wikes82 and thelazyone,

Have you had success getting the MSL with the process that wikes82 posted?

It is my last hope to get that code, because my curve 8330 now is useless.

Have you had success following those steps and getting the number?

Thanks

Carlos

[dtv7288]

Yeb. That how i got my msl

[lankyb#CB]

What is the address for the 7250

[irishjoeyo]

Can someone please post a link to where UniCDMA can be downloaded from? I am not having any luck when I Google it...

Thanks

[irishjoeyo]

6. Open the file, and look for 6 continuous Digits, in that binary file. That is your SPC/MSL code

Hi,

Would you be able to elaborate a little bit on how to find the SPC/MSL code in the file? Also, what application do you use to open it?

Thanks!

[charly007]

I have a little problem... unicdma only recognizes COM ports form 1 to 4..


and My Balck Berry Desktop manager gives me a COM port 11... and 10 only =S

[wikes82]

@charly007: download the software here http://crypto.s3u.net/unicdma/UniCDMA.exe
it's the newest version support COM port higher than 4

@irishjoeyo:
I used strings utility and grep in linux box. If you want, you can send me your dump, then I'll look for it

[assaultandbatteries]

Are the numbers for UniCDMA still the same if you want to get the code for a Pearl 8130?

Also:
These are the binaries that I got from doing one scan of the phone in the default Axesstel mode and then the second from doing it in Qualcomm mode. Could you find them for me if it's not too much trouble? I'm not sure what to sort through, or if this is even correct for my type of BlackBerry.
Send big files the easy way. Files too large for email attachments? No problem!
Send big files the easy way. Files too large for email attachments? No problem!

[wikes82]

Are the numbers for UniCDMA still the same if you want to get the code for a Pearl 8130?

Also:
These are the binaries that I got from doing one scan of the phone in the default Axesstel mode and then the second from doing it in Qualcomm mode. Could you find them for me if it's not too much trouble? I'm not sure what to sort through, or if this is even correct for my type of BlackBerry.
Send big files the easy way. Files too large for email attachments? No problem!
Send big files the easy way. Files too large for email attachments? No problem!

try 569176

[Daywalker44]

Call sprint reps is the fastest to get it...
there are ways to get it from curve if you wanna do it, but it's kinda tricky
here's what to do:

1. Install Desktop Manager, and go to Device Manager, and look for Serial (COM port map for your blackberry)
2. Find a software called UniCDMA (Google it)
3. Connect you berry, and launch DM
4. Run UniCDMA, and set the serial port to your blackberry port (if there are 2 ports, use the highest number (e.g: if you have COM3 and COM4, use COM4)
5. Click on Memory Tab, then Enter Starting Address : 0x1067ed90, and Length : 1703936
Dump the memory to a file.
6. Open the file, and look for 6 continuous Digits, in that binary file. That is your SPC/MSL code

Wikes82: I am looking to find out my MSL for a Sprint 8830 I have and I have followed these directions and have gotten to the point where I have dumped the memory to a .bin file and have searched through it to no avail trying to find 6 continuous digits. I've tried using strings and grep but I am not sure what options to use when searching with either or how or if your piping them together to get the right search. I am wondering if the memory section where the MSL number is located is different for an 8830. I would love any help with this because once I get the MSL for this phone I should be able to do what I need to do pretty easily. All help is very much appreciated!!!! THANK YOU.

[wikes82]

Wikes82: I am looking to find out my MSL for a Sprint 8830 I have and I have followed these directions and have gotten to the point where I have dumped the memory to a .bin file and have searched through it to no avail trying to find 6 continuous digits. I've tried using strings and grep but I am not sure what options to use when searching with either or how or if your piping them together to get the right search. I am wondering if the memory section where the MSL number is located is different for an 8830. I would love any help with this because once I get the MSL for this phone I should be able to do what I need to do pretty easily. All help is very much appreciated!!!! THANK YOU.

try this address 0x10630000, length : 1703936

[josearaujovfx]

I am having the same problem, how can i open the .bin file? i have no linux.

Thank You

[MUSHU]

I have allways an error message :
08:57:13 : Reading 1703936 bytes of memory, starting from 0x1067ED90
08:57:13 : Read error at address 0x1067ED90

with telus storm

any help ??

[pearlzz]

how can i ge the msl unicdma only goes up to 4 and it keeps saying no phone dectected

[forbidden1]

how can i ge the msl unicdma only goes up to 4 and it keeps saying no phone dectected

I'm having the same problem where my phone is connected to the computer but Unicdma keeps saying that there is no phone dectected. Also when I go to my device manager it says that I have COM 3 that is disconnected. I have tried every USB port on my computer and I am having no luck. Any help with any of this would be appreciated. Thanks.

[312]

I have allways an error message :
08:57:13 : Reading 1703936 bytes of memory, starting from 0x1067ED90
08:57:13 : Read error at address 0x1067ED90

Anyone have an answer?

[zelda26]

Anyone know what the addresses are for the Tour?

Mines locked to my buddies account from Sprint. Yet the phone is unlocked. WHAT A PAIN IN THE ****!

[sbs4me]

I also i have read error for tour.
If you can please provide the correct Starting Address, and Length
Thanks

[arunsharma7]

hey I found one program spc generator which seems llike it generate spc/msl code if you can send me your esn(hex) and meid(hex) I can generate one and send just try that number if it works and there is no limit to try this one (like a unlock code) so u have nothing to worry

[312]

How about you post the link to the generator instead of asking for ESNs?

**WARNING: DO NOT POST OR GIVE OUT YOUR ESN**

Posted from my CrackBerry at wapforums.crackberry.com

[billy_mandi]

i used the default pass

[billy_mandi]

an iso buster for bin files