[capitalst]

I tired to update my At&t Bold with the .190 update but, the first time it stuck in the reconnecting to JVM for over 30 minutes and nothing. The BOLD is showing the white screen basically showing it is reconnected. I cancelled the update and was stuck with a 507 error. I figure out how to redo it by doing the the app loader. Now once again its stuck in the reconnecting to JVM. What do I do?? HELP

[capitalst]

No One Can Help?????

[Super Loopy]

I'd probably suggest a wipe and reload if I were stuck at that point.

Use JL_Cmdr to wipe.

[capitalst]

Fixed it. I decided to start from scratch. I deleted the DM on the computer, as well as uninstall the new BB OS on the computer. I also redid the JL_Cmdr wipe and started fresh.

FINALLY PRESTO.. It worked. I was a little worried for about 5 hours trying to get this darn thing to work. I case you run it to this yourself try wiping everything first then installing it again.

[kazohnine]

hey, did you delete the vendor file of the OS ?
im having the same issue. im too worried.
please, help!

[outtaspace]

same issue here tried different pc same issue any ideas 8120

[jagz112]

ive got a similar issue, 8110 keeps getting stuck at reconnecting to JVM, the the loader says unable to load etc, the blackberry just shows a battery with a line through it...



some one please help meeeee

[felispop31]

ive got a similar issue, 8110 keeps getting stuck at reconnecting to JVM, the the loader says unable to load etc, the blackberry just shows a battery with a line through it...



some one please help meeeee

did you solve your problem?i have the same

[pcgizmo#IM]

did you solve your problem?i have the same

I'm going to guess they did:

10-27-2009, 03:55 PM
jagz112
CrackBerry Newbie
Device Model: 8900 (Curve)
Carrier: T-Mobile


Try the JL_Cmdr method above. Others have waited it out a while for it to just complete on it's own.

[michaeljf79]

what is the JL_Cmdr method

[andrew0719]

I found out that inserting the battery will solve the problem

[jays_mummy]

My BB Bold 9700 showed a white screen with 'APP ERROR 523' and a 'reset' button.
I tried a master reset, and it rebooted as normal, verified settings and after a couple of seconds showed the error screen again.
I've tried everything, i've rebooted in safe mode, and tried all other suggestions i have came across.
I searched the error on BlackBerry.com and it told me to upgrade/re-install my devices software. I've tried this, flew through the beginning of the process and now I'm stuck on 'reconnecting to JVM' also.
Any suggestions?

[shah510]

how did you fix it Jl_cmder doesnt work for me

[m.jeddy]

I have the same problem and I tried all the methods with no luck!!! SUCKS

[statizz]

just put your battery in when its stuck in reconnecting to jmv

[beerooz]

I was having the same problem and I've been at it for almost 24 hours. I tried putting the battery in when I was stuck at the JVM situation, and it worked.

[ole32]

Hi, confirmed that when putting the battery back in at "JVM" situation persists and error is as follows Application Loader was unable to connect with your device. Please re-connect your device, enter the password, if required, and click Retry.

At this point, I will tell the the BBSAK will not connct, if it did I would have performed a wipe and loaded the OS.. (only DM connects to my corrupted device) .... The other app through CMD also doesnt work! Please help Ive been at this for almost 24 hours, was on the phone with RIM useless ...

[anon(4201258)]

Yup, putting the battery back in works!!!

[chris_vs1504]

Yup putting the battery back in did the trick for me too, thanks guys!

[kiu.johan]

ben trying all suggestion above and none works,
as for your info, at first 9550 show nothing and wont connect t any of bbsak nor jlcmder regardless the version
then i tried all possible tricks found and voila it can finish step 1 (erasing + load system) but stuck to step2 (reconnecting to JVM) and wont go further regardless the effort and tricks

i'm wondering is there anyway to open the port that BBSAK and JLCmder use to read the bb cos only DM can read the port

PS: sorry to post in an old thread

[Mustafa_jamesbond]

please guys help meeee...my bb 8100 wouldn't show up...just a battery sign....i need help..same stuck at reconnecting to jvm

[alegre-ko]

ben trying all suggestion above and none works,
as for your info, at first 9550 show nothing and wont connect t any of bbsak nor jlcmder regardless the version
then i tried all possible tricks found and voila it can finish step 1 (erasing + load system) but stuck to step2 (reconnecting to JVM) and wont go further regardless the effort and tricks

i'm wondering is there anyway to open the port that BBSAK and JLCmder use to read the bb cos only DM can read the port

Did you solve the problem? Please, need help.

[blackberry-unlocking710]

please guys help meeee...my bb 8100 wouldn't show up...just a battery sign....i need help..same stuck at reconnecting to jvm

Try to leave it connected to your PC for a few hours..
If it won't work then you need to replace the battery.

[Phashash0007]

Hi I have a 9000 it show me Jvm 102 error I love my phone I don't know what to do to make it rite can u please help.

[jrarrmy]

can't believe these phones can die so easy. just like that, no phone again.

no one can solve this connecting to jvm?